Acoustic Imaging Cameras & Imagers
- 64 low-noise MEMS microphones
- Adjustable bandwidth: 2 kHz to 65 kHz
- 5MP optical camera
- 6.6-inch Spiral Array Layout
- 140/162 MEMS Digital Microphone
- Acoustic Image Field of View (FOV): 66°x 52°
- 124 microphones
- View the leak rate (l/min or CFM) in real-time
- Auto-filtering & automatic distance input
- 136 Low-noise MEMS Microphones
- Real-time estimated leak rate
- Smart Partial discharge detection
- Frequency range: 2-52kHz
- Detection range: 50m
- LeakQ™ severity index: indicates the severity of leaks using a 1-10 scale
- 128 acoustic sensors & 8MP optical camera
- Partial discharge diagnosis & leak quantification
- Two versions: standard model & ATEX-certified model
- Utilises sound technology to identify and locates leaks
- SoundMap provides increased detail and clarity
- Identifies and isolates leak and vacuum frequencies
- Locates leaks in compressed air, gas, steam and vacuum systems
- Find partial discharge and compressed air, gas, steam and vacuum leaks
- Frequency range: 2kHz to 100kHz
- Converts sound into a SoundMap which is superimposed onto the visual image
- Frequency range: 2-65kHz
- Detection distance: up to 70m
- LeakQ™ : calculates the size, rate, & cost of the leak & assigns a severity index
- NEW Mechanical Fault mode
- NEW Built-in LED lights
- NEW Fleet Management functionality
- Detect PD from up to 200m from the source
- NEW Fleet Management functionality
- NEW 1280 x 720px, 5-inch colour screen
- Frequency range: 2-100 kHz
- Detection distance: up to 120m
- LeakQ™, MecQ™, and PDQ™ modes
- 12MP colour camera
- Frequency range: 2-130 kHz
- Advanced leak detection estimates the size, rate, and cost of leaks
- Locate leaks and PD from up to 200m (656ft) from the source
- Identify leaks 5x smaller from 4x the distance
- Find PD faults 30x smaller than previously possible
- Frequency range: 2-130 kHz
- 12MP colour camera
- Advanced leak detection; mechanical fault analysis; PD classification
- 128-channel MEMS microphone array
- 8MP digital camera
- 7”, 1024 x 600px touchscreen display
About Acoustic Imaging Cameras & Imagers
Overcome the challenges of leak detection with an acoustic camera. An imaging device is used to locate sound sources and characterise them. It consists of a group of microphones, also called a microphone array, from which signals are simultaneously collected and processed to form a representation of the location of the sound sources.
Compressed air leaks, vacuum system leaks, and electrical partial discharge are all expensive system issues that lead to unplanned outages, productivity reduction, consume power, and may negatively impact worker safety. Ultrasound imaging with an acoustic camera is an easy-to-use, effective way to detect these equipment issues as part of a complete asset management plan. Acoustic imaging typically allows professionals to complete their inspections ten times faster than with traditional methods.