The FOTRIC P7 MiX Series delivers precise measurements and high-definition imaging for detecting leaks and partial discharges. A rotatable infrared lens and acoustic microphone enable access to hard-to-reach areas. Five models are available to choose from.
In Thermal Mode, the device excels at inspecting electrical equipment, transmission devices, high-temperature containers, and insulation systems. It reveals thermal gradients for easy analysis while preserving critical thermal details to highlight object contours.
Acoustic Mode swiftly detects when equipment exhibits issues such as partial discharges, gas leaks, or abnormal noise. MiX Mode evaluates thermal and acoustic data, delivering real-time insights through the 5-inch LCD screen.
Bookmark images of suspected faults for later review with the onboard analysis function. For more in-depth evaluations, FOTRIC's AnalyzIR software allows for detailed analysis.
Call 01642 931 329 or complete the form:
Thermal Imaging Parameters | |
---|---|
Infrared Resolution | 640 x 480 |
Super Resolution | 1280 x 960 |
Detector Type | Uncooled infrared focal plane detector |
Thermal Sensitivity (NETD) | <30mK@30℃ |
Detector Pitch | 17µm |
Spectral Range | 7~14µm |
Frame Rate | 30Hz |
Field of View (FOV) | 25° x19° |
Spatial Resolution (IFOV) | 0.68 mrad |
Minimum Focus Distance | 0.25m |
Focal Length | 25mm |
Focus Mode | Manual TurboFocus system (thermal contrast AF, laser-assisted AF, continuous AF, touch AF) |
Acoustic Imaging Parameters | |
Microphone Channels | 162 MEMS digital microphone |
Acoustic Image FOV | 66° x52° |
Localisation Error | <0.05m@1m, 40kHz |
Transverse Spatial Resolution | <0.45m@1m, 40kHz |
Main-Side Lobe Inhibition Ratio | >10dB@40kHz |
Sound Pressure Sensitivity | 0.01L/min@0.1MPa, 1.5m, φ30μm leakage 0.025L/min@0.3MPa, 6.5m, φ30μm leakage 0.045L/min@0.3MPa, 7.5m, φ40μm leakage |
Sound Pressure Measurement Range | 10kHz: 6~120dB SPL 15kHz: -3~120dB SPL 20kHz: -7~120dB SPL 25kHz: -13~120dB SPL 30kHz: -4~120dB SPL 35kHz: 8~120dB SPL 40kHz: 2~120dB SPL 45kHz: -2~120dB SPL 50kHz: -5~120dB SPL 55kHz: -2~120dB SPL 60kHz: 3~120dB SPL 65kHz: 2~120dB SPL 70kHz: 8~120dB SPL 75kHz: 7~120dB SPL |
Acoustic Sampling Rate | 200kHz |
Acoustic Refresh Rate | 25Hz |
Working Distance | 0.3~100m |
Acoutherm Features | |
Mix Mode | Display thermal imaging and acoustic signals on the same interface |
Temperature Analysis | |
Complete Temperature Range | -20~650℃ |
Temperature Range | -20℃ ~120℃, 0℃ ~650℃, Intelligent range |
Temperature Extension | Support extension: Lowest to -40℃ Highest to 2000℃ |
Measurement Accuracy | ± 1℃ or ± 1%, whichever is greater (ambient temp at 25℃, temperature range 0℃ ~100℃ ), ± 2℃ or ± 2% for other temperature range |
Measurement Spot | 18 |
Measurement Line | 15 |
Measurement Area | 18 |
Line Temperature Distribution | Support checking line temperature distribution |
Measurement Parameters | Emissivity, Reflected temperature, Ambient temperature, Humidity, Distance and IR window compensation |
ROI Emissivity | Support changing emissivity for an individual measurement tool |
Area Alarm | High-temperature alarm and low-temperature alarm |
Temperature Rise Feature | Support |
On-device Analysis | Support analyzing radiometric images and videos |
PC Software | AnalyzIR NaviPdM |
Acoustic Measurement Analysis | |
Frequency Range | 2~100kHz |
Frequency Range Selection | Support preset frequency range for different scenarios for later selection Support manual adjustment for frequency range |
Gain Mode | Noisy environment: Used in scenarios where there is interference from other sound sources Quiet environment: Used in scenarios with no interference from other sound sources. The device amplifies weak sound signals to enhance detection sensitivity Smart gain: The device automatically adjusts the size of the sound signal based on its characteristics. |
Measurement Spot | 2 |
Measurement Area | 2 |
Detection Mode | LQ Mode: Displays the leakage level PD Mode: Displays a PRPD diagram, adapted to different AC frequencies (50/60Hz) |
Default Detection Mode | LQ Detection Mode |
AC Frequency | Selectable between 50 and 60Hz |
Acoustic Image Focus | Masks the surrounding area and focuses only on a selected part of the acoustic image |
On-device Analysis | The device can directly analyse acoustic images and holographic acoustic videos |
Analysis Software | AnalyzIR professional thermal and acoustic image analysis software |
Leak Evaluation | Automatic identification of leakage points, automatic evaluation of leakage and annual energy costs |
Partial Discharge Diagnostics | Automatic diagnosis of discharge types such as surface, floating and tip (corona) discharges |
Display Screen | 5", 1280*720 pixels, LCD touchscreen display with Gorilla Anti-Explosion screen |
Thermal Imaging Display | |
Image Mode | Thermal\Digital\PIP\T-DEF® blend |
Palette | 16 standard palettes: Grey, Iron10, Iron, Rainbow, Grey10, GreyRed, MidGrey, Yellow, Rain, Rain10, Blue, GlowBow, Medical, Medical10, MidGreen, Prism |
Inverted Palettes | 16 |
Minimum Temperature Span | Auto (Minimum Temp Span 3℃ ), Manual (Minimum Temp Span 2℃ ), Touch-screen(Minimum Temp Span 2℃) |
Colour Alarm | High temperature, low temperature, and interval isotherms |
Image Overlay | Display global max, min, avg and measurement parameters |
High/Low Temperature Tracking | Yes, for both global and regional |
IREdge | Support thermal-based contour enhancement |
T-DEF | Adjustable transparency 0% ~100% |
PIP | Moveable and Resizable |
T-TWB | Temperature visual representation normalization option |
Digital Zoom | 1~16x, continuous |
Acoustic Imaging Display | |
Image Mode | Single, Multi, Hologram |
Palette | Support 3 palettes: Red-Blue, Iron, Grey Supports transparency adjustment |
Gray-scale Background | Displayed as a digital image in black and white greyscale |
Information Overlay | Displays results of leak evaluation Displays diagnostic results for type of partial discharge |
Sound Pressure Tracking | Special marker tracking the maximum sound pressure spot |
T-FFTD | Capture instantaneous sound signals and make them stay longer in real-time audio and video images |
Digital Zoom | 1~10x, continuous |
Capture Features | |
Digital Camera | Thermal: 5-megapixel, industrial-grade digital camera Acoustic: 13-megapixel, industrial-grade digital camera |
Storage Card | SD card, hot-swappable, supports up to 2TB |
Single Frame Capture | Support |
Time-lapse Capture | Set the time interval from 2 seconds to 1 hour to save the images of corresponding modes in thermal image mode (IR image, T-DEF®, Picture in Picture) and acoustic image mode (single-source, multi-source, holographic) at regular intervals |
Image Format | JPG (radiometric thermal image), JPEG (holographic acoustic image), JPG (visible light image) |
Video Format | IRS or IRSX (radiometric video), ACS (holographic acoustic video), MP4 (non-full radiometric video), MP4 (non-holographic acoustic video) |
Freeze Image | Supports single frame capture, full radiometric video and holographic sound video recording |
QR Code | QR codes and bar codes can be scanned as tag annotations |
Voice Annotation | Record up to 120 seconds of voice to be saved in thermal image, acoustic image, radiometric and holographic video |
Text Annotation | Enter text via soft keyboard to save to thermal, acoustic, radiometric and holographic video |
Tags | Enter text via the soft keyboard to save to Thermal and Acoustic images, Radiometric and Holographic video, which can then be filtered by tags in the gallery |
Favourite | Click on the 'Favourite' button to save the Favorite status to Thermal, Acoustic images, Radiometric and Holographic video and highlight it in the gallery preview screen, then filter by 'Favourite' status in the gallery |
Radiometric Video | Supports the recording of radiometric video for analysis |
MP4 Recording | Support for non-radiometric, visible video recording (for viewing only, not for analysis) |
Holographic Video Recording | Supports holographic video recording for analysis, up to 7 minutes in length |
Non-Holographic Video Recording | Supports non-holographic acoustic video recording (for viewing only, not for analysis) |
Data Connection | |
WiFi | Support 2.4GHz&5GH channel, Support 802.11a/b/g/n/ac |
Bluetooth | Support |
USB | USB Type-C type USB 3.0 / 2.0 compliant, Support USB OTG |
HDMI | Micro HDMI type, HDMI 1.4 compliant, Supports 1080P imaging video streaming in 60Hz |
FTP Data Transfer | Connect to the device via a WiFi network or the device's WiFi hotspot, and then access the data in the device via FTP |
PC Radiometric Video Analysis | Real time radiometric video analysis through AnalayzIR |
Remote Access | Connect to AnalyzIR via a USB Type-C port to view full radiometric video streams, and via HDMI HD port to connect to a display or projector |
Remote Control | |
Mobile Access | Via IRExplorer |
Webpage Access | Via IRExplorer |
Auxiliary Features | |
Software and Firmware Upgrade | Support on OTA upgrade and local upgrade through USB |
TurboFocus | TurboFocus Speedy Intelligent Autofocus system for continuous, laser distance, thermal contrast, manual focus |
Ultrasound Conversion | Converting the inaudible sound of ultrasound into audible sound in real time |
Laser | Independent key activation Laser level: 2 Wavelength: 635nm; Power: <1mW Laser distance: 0.1~50m, Accuracy: d*0.01%±2mm |
Laser-assisted Area Measurement | Support |
Real-time Distance Measurement | Real-time calculation of the distance to the sound source from the incoming sound signal of the acoustic sensor |
Headphones | Real-time monitoring of incoming sound signals from acoustic sensors via Bluetooth headset |
GPS | Support BeiDou/GPS/GLONASS satellite positioning, location information can be saved to thermal image, acoustic image, full radiation video and holographic acoustic video |
Compass | Supports 360° orientation and orientation information can be saved to thermal and acoustic images, radiometric and holographic videos |
LED Flash Lamp | Supports torch illumination and flashlight mode |
Unique features | |
MagicThermal | AI-based auto-recognition and feature contour markup |
Power System | |
Battery | 3.6V, 9900mAh rechargeable lithium battery, field replaceable |
Battery Operation Time | Continuous work ≥ 2.5h (depends on the environment and workload) |
Charging Method | Support charging dock, and USB direct charging |
Battery Charging Time | Charge to 90% in 2.5 hours |
Energy Management | Automatically screen rest time |
External Power Source | Support using DC 12V to power the device |
Reliability and Certificates | |
Safety | SELV(IEC60950-1:2005) |
EMC Compatibility | IEC 61000-4-2 |
Enclosure Rating | IP54 |
Shock | 25g(IEC 60068-2-27:2008) |
Vibration | 2g(IEC 60068-2-6:1995) |
RoHS Compliant | Compliant |
Physical Parameters | |
Operating Temperature | -20℃ ~50℃ |
Storage Temperature | -40~70℃ without battery |
Relative Humidity | <95%RH |
Dimension (mm) | 190mm x 181mm x 99mm |
Weight (including battery) | 1.6kg (without lens) |
Battery Weight | 210g |
Casing Material | Hard plastic: PC+ABS Soft plastic: TPE, Magnesium alloy, Aluminum alloy, Flame retardancy rating: UL94 HB |
Mounting Method | Support UNC 1/4-20 interface for tripod connection |
FOTRIC Warranty | |
FOTRIC Warranty | 2 years |
Recommended Calibration Interval | 2 years for thermal camera 1 year for acoustic camera |
Language | |
Languages | English, Spanish, German |