Copper & Fibre Data Cable Testers
In Stock : Get It Next Working Day*
£54.17
£65.00 inc. vat
- Verify cabling
- Easy to use
- Solve issues faster
£57.00
£68.40 inc. vat
- Replaceable Tip
- Locate weak signals
- Find cables in noisy environments
Stock Due : Estimated 1-2 Weeks
£73.20
£87.84 inc. vat
- Test wires up to 300meters in length
- Perform loopback and remote test features
- LED screen
In Stock : Get It Next Working Day*
£74.00
£88.80 inc. vat
- Tests RJ45 network cables
- Instant identification of connected cable type
- Detects faults within cable structure
In Stock : Get It Next Working Day*
£86.50
£103.80 inc. vat
- Easy to use
- Locate weak signals
- Find cables in noisy environments
In Stock : Get It Next Working Day*
£132.00
£158.40 inc. vat
- VDV II, VDV II Plus, or VDV II Pro
- State-of-the-art technology
- TREND AnyWARE Cloud
In Stock : Get It Next Working Day*
£175.00
£210.00 inc. vat
- Laser light source
- Up to 80 hours of operation
- Hand-held, battery-powered tool
In Stock : Get It Next Working Day*
£271.00
£325.20 inc. vat
- Toner and probe for tracing and locating cables
- Identify specific cables in a bundle or on a patch panel or switch
- Detect faults such as opens, shorts, and reversed pairs
£489.00
£586.80 inc. vat
- MM 850nm or MM/SM Light Source
- Troubleshoot active LANs
- Quickly measure cabling loss
- Interchangeable ST, SC, and FC adaptors
£589.00
£706.80 inc. vat
- Network troubleshooting
- Monitor network traffic
- Professional PDF reports
£841.00
£1,009.20 inc. vat
- PLUS or PRO kit
- Touchscreen
- Custom wiremap
£849.00
£1,018.80 inc. vat
- Two models available: MicroScanner PoE and MicroScanner 2
- Multimedia support: test common media types without adapters
- IntelliTone: trace most cable and wire pairs
In Stock : Get It Next Working Day*
£1,189.00
£1,426.80 inc. vat
- Choose from 7 kits
- Quad, multimode, single-mode, and PON options
- Fibre optic testers
£1,259.00
£1,510.80 inc. vat
- Touchscreen
- Test Reporting
- Fast & Flexible
£2,100.00
£2,520.00 inc. vat
- Industry-leading repeatability over hundreds of splices
- Industry-leading splice loss: 0.01 dB
- Two versions available: S40 & S60
In Stock : Get It Next Working Day*
£2,595.00
£3,114.00 inc. vat
- Verify the performance of copper cables up to 10G
- PASS/FAIL assessment
- Large, colour, touchscreen display
£3,645.00
£4,374.00 inc. vat
- Single-mode and multimode
- Three kits to choose from
- Compatible with LanTEK IV
Stock Due : Estimated 1-2 Weeks
£4,795.00
£5,754.00 inc. vat
- Measure cable attenuation in multimode and single-mode cabling
- Troubleshoot LAN and telecom networks
- Store up to 40 000 tests
In Stock : Get It Next Working Day*
£6,404.17
£7,685.00 inc. vat
- VisiLINQ Permanent Link Adapter
- TREND AnyWARE Cloud software
- 500MHz or 3000MHz Cable Certifier
£7,395.00
£8,874.00 inc. vat
- Certify cabling to Cat 6A/Class EA in 10 seconds
- VisiLINQ™ colour-coded indicators illuminate to display the test status
- Touchscreen user interface
£11,597.00
£13,916.40 inc. vat
- Pinpoint crosstalk, return loss, or shield faults
- Store up to 12 000 test results with full graphics
- Two models available: DSX2-5000 or DSX2-80000
Page 1 of 1
About Data & Network Cable Testers
Twisted-pair copper data cables must be tested to TIA/ISO standards during network cabling. Copper certification testers function by determining PASS/FAIL results according to the frequency limits for each test defined within industry standards such as ISO/IEC 11801:2002 or ANSI/TIA/EIA-568.
The tests performed for certification are:
|
Test Parameter |
TIA-568-B |
ISO 11801:2002 |
|
Wiremap |
Pass/Fail |
Pass/Fail |
|
Propagation Delay |
Pass/Fail |
Pass/Fail |
|
Delay Skew |
Pass/Fail |
Pass/Fail |
|
Cable Length |
Pass/Fail |
Information only |
|
Insertion Loss (IL) |
Pass/Fail |
Pass/Fail |
|
Return Loss (RL) |
Pass/Fail (except Cat3) |
Pass/Fail |
|
Near-End Crosstalk (NEXT) |
Pass/Fail |
Pass/Fail |
|
Power Sum NEXT (PSNEXT) |
Pass/Fail |
Pass/Fail |
|
Equal-Level Far-End Crosstalk (ELFEXT) |
Pass/Fail |
Pass/Fail |
|
Power Sum ELFEXT (PSELFEXT) |
Pass/Fail |
Pass/Fail |
|
Attenuation-to-Crosstalk Ratio (ACR) |
Information only |
Pass/Fail (except Class C) |
|
Power sum ACR (PSACR) |
Information only |
Pass/Fail (except Class C) |
|
DC Loop Resistance |
Pass/Fail |
There are essentially two types of certification testers:
- Verification testers: for basic continuity function checks, such as toning and wiremap. Used when networks are extended, changed, or moved; they sometimes include Time Domain Reflectometers.
- Qualification testers: used to determine whether a network qualifies for certain data network jobs. For example, is it able to handle faster network speeds or technologies such as VoIP, Gigabit Ethernet, or 100BASE-TX? Useful for network technicians who want to upgrade a system to higher speeds or analyse connectivity problems.
We stock a range of verification and qualification certification testers by leading manufacturers. For more information please get in touch.
