Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Fluke Networks SimpliFiber Pro Multimode Source, 850/1300nm
- Fiber Inspection
- Fiber Cleaning
- Results Management
- Verify and Locate Faults
SKU
SFMULTIMODESOURCE
MPN
SFMULTIMODESOURCE
The Fluke Networks SimpliFiber® Pro Multimode Source has dual wavelengths of 850 nm and 1300 nm. This source is ideal for verifying the performance of high-bandwidth networks, enabling technicians to assess optical loss and ensure proper network functionality. Compact and durable, the SimpliFiber Pro Multimode Source is a reliable solution for professionals looking to streamline fibre testing in the field.
Key Features
- Fiber Inspection
- Fiber Cleaning
- Results Management
- Verify and Locate Faults
- Unique Capabilities
- Reducing the multiple steps and using a simultaneous dual-wavelength testing feature to measure the range of power levels in just half the time
- Allowing for a non-touch solution to check for a live fiber without having to plug into ports
- Enabling a network technician to do time-consuming procedures that normally require a team
- Dual-wavelength testing
- CheckActive - connect to a fiber without any setup
- FindFiber Remote ID - identify the physical location of cabling runs
- Automatic identification of wavelength being transmitted
- USB port Data connectivity
- Saves 1000 results
- Min/max range
- Six calibrated wavelengths
- Fixed SC port
-
FindFiber source capability
Technical Information
Specification
| Environmental Specifications | |
|---|---|
| Operating Temperature | -10º C to 50º C |
| Storage Temperature | -20º C to 50º C |
| Operating Humidity | 95% (10º C to 35º C) Non-Condensing 75% (35º C to 40º C) Non-Condensing Uncontrolled <10º C |
| EMI, RFI, EMC | Standards compliant¹ |
| ¹ Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1) | |
| Multimode Optical Source | |
| Emitter Type | LED |
| Central Wavelength | 850 nm, 1300 nm |
| Wavelength Accuracy | 850 nm: +30/- 10 nm 1300 nm: +/- 20 nm |
| Spectral Width (FWHM) | 850 nm: 50 nm (typical) 1300 nm: 135 nm (typical) |
| Minimum Output Power | 850/1300 nm:³ -20 dBm |
| Power Output Stability¹ | ±0.1 dB over 8 hours |
| Auto Dual-Wavelength Switching | Yes. Can be enabled/disabled by user. |
| Optical Output Connector | Fixed SC |
| FindFiber Code Generation | Yes. Fixed at ID 1. |
| Modes | CW, 2 kHz modulated, Auto-wavelength |
| Power Requirement | 2 AA Alkaline batteries. |
| Battery Life² | 40 hrs (typical) |
| Automatic Power Off | 30 minutes (can be disabled by user) |
| Low Battery Warning | Yes, LED blinks |
| Size (L x W x H) | 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm) |
| Weight | 1.8 oz (278 g) |
| ¹ 23° C ± 2° C, after 5 minutes warm-up time ² In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries. |
|
| FindFiber Source Specifications | |
| Emitter Type | Laser |
| Source Connector | Fixed SC |
| FindFiber Code Generation | 1 through 8. The default is 3. |
| Power On/Low-battery Indicator | LED |
| Power Requirement | 2 AA Alkaline batteries |
| Battery Life | > 80 Hours (typical) |
| Automatic Power Off | 30 minutes |
| Low Battery Warning | LED blinks |
| Size (L x W x H) | 7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm) |
| Weight | 4.4 oz (125 g) |
| Safety | Meets Class 1 CDRH |
Document Downloads
Additional Information
SKU
SFMULTIMODESOURCE
Manufacturer Part Code
SFMULTIMODESOURCE
Fluke Networks SimpliFiber Pro Multimode Source, 850/1300nm
£1,411.00
£1,693.20 inc vat
£1,411.00
£1,693.20 inc vat