Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Fluke Networks Pro3000 Analogue Tone Generator and Probe Kit
- SmartTone technology
- Continuity testing
- Line polarity confirmation
- Quick-twist tip
SKU
PRO3000
MPN
PRO3000
The Pro3000 Analogue Kit traces and identifies wires in non-active networks. It includes SmartTone technology, which provides five distinct tones. By momentarily shorting the far end of a cable pair, technicians can hear a tone change through the probe, confirming the correct wires.
The powerful speaker provides the probe with audibility through drywall, wood, and enclosures, ensuring quick and accurate wire location. The tone generator can send a strong signal up to 10 miles (16 km) on most cables.
Key Features
- SmartTone technology
- Send tone signal up to 10 miles on most cables
- Line cord features angled bed-of-nails clips and a ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
- External switch allows the selection of solid or alternating tone options, indicated with solid or flashing LEDs
- Continuity testing
- Line polarity confirmation
- Loud large speaker amplifies the tone through walls, enclosures, wood or plaster
- Easy-to-use adjustable volume control dial
- Quick-twist tip for easy replacement
- Free spare tip inside
What's Included?
- Tone generator
- Probe
- Nylon pouch
Technical Information
Specification
| Pro3000 Analog Toner | |
|---|---|
| User Interface | Slide the switch to select Continuity or Tone Mode Push the button to switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dBm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C Storage: -40° C to 70° C |
| Case Dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe | |
| User Interface | ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C Storage: -40° C to 70° C |
| Case Dimensions | 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
Document Downloads
Fluke Networks Pro3000 Series Datasheet
Fluke Networks Pro3000 User Manual
Fluke Networks Pro3000 Tone Generator and Probe Kit Datasheet
Additional Information
SKU
PRO3000
Manufacturer Part Code
PRO3000
Fluke Networks Pro3000 Analogue Tone Generator and Probe Kit
£126.00
£151.20 inc vat
£126.00
£151.20 inc vat