Reward Points
:
16
£19.20
£16.00
Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester
The Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester can be used to check the operation of relays and solenoid valves in machinery used as part of energy, transportation, pneumatic, and hydraulic control systems, as well as in process industries.
This instrument enables efficient testing as solenoids and relays can be checked without dismantling equipment or control panels. The Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester’s extended probe design ensures that it can be used to access hard-to-reach solenoids and relays. Additionally, its integrated LED torch means it can be used to check relays and solenoids in environments with low light.
When a magnetic field is detected the bright yellow LED will illuminate the Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester’s clear tip. It will also issue an audible alert. Both of these indications make the Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester suitable for use in visually challenging environments.
The Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester will also indicate when its battery has become low and features an Auto Power Off function designed to conserve battery power.
Adding to the Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester’s practicality is its ergonomic pen shape and clip which allow it to be easily carried in a pocket across worksites.
The Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester is an ergonomic, efficient and easy-to-use magnetic field tester suitable for troubleshooting and servicing control equipment.
Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester Key Features
- Verify the operation of relays and solenoid valves
- Suitable for checking machinery used in energy, transportation, pneumatic and hydraulic control systems
- Check machinery used in process industries
- Enables efficient testing of solenoids without dismantling equipment or control panels
- Extended probe design for easy access
- Integrated LED torch for testing in low light
- The clear tip is illuminated by a bright yellow LED and a buzzer is sounded when a magnetic field is detected
- Low battery indication
- Auto Power Off function
- Ergonomic pen shape with clip
- Can be easily carried in a pocket
- An ergonomic, efficient and easy-to-use magnetic field tester
- Suitable for servicing and troubleshooting control equipment
What’s Included?
- Martindale NC1 Non-contact Solenoid/ Magnetic Field Tester
Martindale NC-Series Non-contact Voltage & Solenoid Testers Comparison Chart
| NC1 | NC2 | NC3 | NC4 | |
|---|---|---|---|---|
| AC Voltage Range | - | 200-1000V | 200-1000V |
12-1000V 50-1000V |
| Frequency Range | - | 40-400Hz | 40-400Hz | 40-400Hz |
| Magnetic Field Detection | >10mT | - | >10mT | - |
| LED Indication | Yellow LED | Red LED | Yellow/ Red LED | Red LED |
| Audible Indication | Yes | Yes | Yes | Yes |
| Power on Pulse LED | Yes | Yes | Yes | Yes |
| Low Battery Indication | Yes | Yes | Yes | Yes |
| Auto Power Off | Yes | - | Yes | Yes |
| LED Torch | Yes | Yes | Yes | Yes |
Martindale NC-Series Non-contact Voltage & Solenoid Testers Technical Specifications
| NC1 | NC2 | NC3 | NC4 | |
|---|---|---|---|---|
| Electrical | ||||
| Maximum voltage | - | 1000V AC rms | ||
| Voltage sensitivity range | - | 200 to 1000V AC rms | 200 to 1000V AC rms |
12 to 1000V AC rms 50 to 1000V AC rms (default range) |
| Frequency range | - | 40 to 400Hz | ||
| Magnetic | ||||
| Magnetic field sensitivity | >10mT | - | >10mT | - |
| Environmental | ||||
| Temperature & Humidity (Operating & Storage) | 0°C to 40°C ≤ 80% R.H. | |||
| Altitude | up to 2000m | |||
| Pollution Degree | 2 | |||
| General | ||||
| Power | 2 x 1.5V AAA alkaline batteries (IEC LR03, NEDA 24A) | |||
| Dimensions | 158(L) x 20(W) x 27(D) | |||
| Weight | 55g | |||
| Safety | ||||
| Conforms to | BS EN 61010-1:2010 CAT IV 1000V Class II, Double insulation | |||
| IP Rating | IP40 to BS EN 60529 | |||
| EMC | ||||
| Conforms to | BS EN 31326-1 | |||
Reviews
Additional Information
| SKU | MARNC1 |
|---|---|
| Manufacturer Part Code | NC1 |
