Dial Indicators
Offer
£27.90
£33.48 inc. vat
- Nine models available
- Micron versions are jewelled
- Adjustable bezel with stop screw
- Foam box
Offer
In Stock : Get It Next Working Day*
£34.95
£41.94 inc. vat
- Standard 0.01mm graduations
- O-ring and secure adhesion prevent water and oil ingress
- Hardened, scratch- and chemical-resistant coating
Offer
£46.95
£56.34 inc. vat
- Optimised for applications where space is limited
- Outer bezel diameters range between 31mm and 40mm
- Ideal for restricted-space applications in gauging fixtures
Offer
£54.40
£65.28 inc. vat
- Unique shock-proof mechanism
- Ideal for restricted-space applications
- Developed to eliminate the possibility of reading errors
Offer
£54.50
£65.40 inc. vat
- Nine models available
- Tolerance pointers
- Precision movement
- Coarse and fine dials
Offer
£57.50
£69.00 inc. vat
- Models for all applications
- Seven models available
Offer
£58.50
£70.20 inc. vat
- Adjustable bezel with stop screw
- Tolerance indicators
- 0-0.5", 0-1.0", and 0-25mm ranges
- Lug back
Offer
£60.00
£72.00 inc. vat
- 10mm/ 0.01m
- Housings machined from solid brass
- Plunger type
Offer
£66.50
£79.80 inc. vat
- 25mm, 37mm, 1", and 1.5" models
- Rotating dial
- Two dovetail clamps
- Styli length: 12mm / 1/2", M1.4 thread
Offer
£73.09
£87.71 inc. vat
- Standard 0.0001” to 0.001” dial indicators with a 57mm-diameter bezel
- O-ring and secure adhesion prevent water and oil ingress
- Hard, scratch- and chemical-resistant coating on the crystal
Offer
£75.29
£90.35 inc. vat
- Outer frame diameter: 57mm
- O-ring ensures air tightness between the outer frame and crystal case
- Hard, scratch- and chemical-resistant crystal coating
Offer
£81.39
£97.67 inc. vat
- Standard 0.001 or 0.005mm graduations
- O-ring and secure adhesion prevent water and oil ingress
- Hardened, scratch- and chemical-resistant coating
Offer
£85.60
£102.72 inc. vat
- Peak-Hold Dial Gauge
- Adjustable-Hand Dial Gauge
Offer
£88.50
£106.20 inc. vat
- 25mm, 37mm, 1", and 1.5" models
- Rotating dial
- Two dovetail clamps
- Carbide points
- Styli length: 12mm / 1/2"
Offer
In Stock : Get It Next Working Day*
£89.99
£107.99 inc. vat
- Parallel face indicator
- Vertical face indicator
- Useful for centering holes
Offer
£101.00
£121.20 inc. vat
- Automatic reversal of measuring direction
- Fully jewelled bearings
- 1.6mm/0.01mm or 0.060"/0.0005"
Offer
£106.90
£128.28 inc. vat
- Suitable for applications where there is limited space
- Ideal for situations where standard dial gauges would be difficult to read
- Mount onto levelling tool tables or inspection jigs
Offer
£116.90
£140.28 inc. vat
- Large-diameter dial face for easy reading
- Stem and plunger made from high-strength, quench-hardened steel
- Supplied with a bezel clamp and limit markers
Offer
£124.50
£149.40 inc. vat
- Imperial or metric
- Anti-magnetic
- Automatic reverse-action stylus
- Adjustable bezel for zeroing
Offer
£130.50
£156.60 inc. vat
- MW475-01 magnetic base with fine adjustment
- MW400-06 0-10mm/0.01mm dial indicator
Offer
£169.50
£203.40 inc. vat
- Sets and individual indicators
- Set supplied in a wooden case
Offer
£369.00
£442.80 inc. vat
- Carbide contact points
- Universal application to all directions
- Adjustable without moving the indicator
Offer
£1,560.00
£1,872.00 inc. vat
- Accuracy tester
- Accepts ø6 mm, ø8 mm, 1/4", and 3/8" indicator stems
- Suitable for 0.01 mm resolution dial indicators, dial test indicators, and bore gauges
Page 1 of 1
About Dial Indicators
Dial indicators are used primarily for measuring gauges and fixtures. They are used to indicate the run-out (the misalignment between the workpiece's axis of rotational symmetry and the axis of rotation of the spindle) of the workpiece, with the ultimate aim of reducing it to a suitably small range using chuck jaw adjustments.
