Clamp Adaptors
Most commonly used with digital multimeters, clamp adaptors expand the abilities of a DMM to include the ability to test current levels. Wide range of adaptors available for a large selection of multimeters from many manufacturers.
Find out more about Clamp Adaptors below.
- 0-400A AC current measurements
- Maximum conductor size of 1.34"
- Dual banana plug connector
- AC/DC measurements 0 to 400A
- 1.34" max conductor size
- Compatible with many different instruments
- Suitable for ⌀10mm conductors (cables)
- Measure AC
- Measure AC current from 40 to 1600A
- Measure DC current from 40 to 2000A
- 1.34" (34mm) max conductor size
- Transform your digital multimeter into a current measurement tool
- Measure up to 150A AC
- Small, compact size for difficult environments
- Suitable for ⌀10mm cables
- Measure current up to 10A
- Low current measurements up to 100A AC
- High-performance magnetic double-coil
- Protected against voltage surges
- Made for use with PV100
- Allows measurements of AC/DC
- 0.5 to 40A measurements
- Flexible probe allows attachment to difficult applications
- Connects to various Fluke meters
- 1.8m cord
- 7.5 mm coil diameter
- Ergonomic design
- 1.8 m (6 ft) cable
- Compatible with Fluke clamp adaptors
- Wireless connectivity
- 65000 record memory storage
- Increase the versatility of your DMM
- Measure up to 400 amps of AC
- Accurate and easy to read
- Accurate readings without breaking the circuit
- Max conductor size 20mm
- CAT III 600V safety rating
- Small-size jaws
- Works with multimeters and oscilloscopes
- AC/DC current measurements
- AC measurement range: 0.005 A to 100 A
- Two ranges: 5A - 100A
- Clamping Ø / length: 20 mm
- AC current measurements from 0.5 to 400A
- Built-in storage allows up to 65000 records to be saved
- Wirelessly connects to Fluke Connect testing tools, smartphones and PC
- DC probe
- Suitable for use with Megger's DLRO100 testers
- Works with several Kewtech testers
- Maximum jaw opening of 24mm
- Rated current of 5A AC
- Measures from 0.1mA to 120A AC
- Small 8mm jaw
- Complies to IEC61010-1 CAT. II 100V
- Measure up to 70A AC
- Suitable for leakage and load current measurements
- Works with several Kewtech instruments
- 40mm jaw opening
- Works with several Kewtech products
- Measure current to 200A AC
- Designed to enhance functions of existing devices
- High basic accuracy of +/-1%
- 1000:1 conversion rate for easy calculations
- Compact clamp meter with a 400 A AC measurement range
- Max conductor: Ø 32mm
- Safety rating: CAT IV 600V/ CAT III 1000V
- Accurate, ergonomic and easy-to-use
- 1200 A highest primary current
- Symmetrical coil winding technology
About Clamp Adaptors
The clamp adaptor differs from a normal clamp meter - these instruments are not generally made for reading by themselves but are designed instead to interface with electrical testers such as multimeters to enable them to perform current measurements.
They come in a huge variety of shapes and sizes ranging from ultra-compact for fitting inside electrical cabinets to large sizes for measuring multiple conductors simultaneously or fitting around larger wires. Adaptors can also be made of flexible materials, allowing them to be bent around an application that simply wouldn't be possible when using a clamp meter.
It is important to note that not all clamp adaptors will work with all equipment - please read the description for which tester(s) the clamp you're looking at might be suitable.