Note: this is an optional accessory designed for attachment to selected Kewtech products. It cannot be used on its own as a clamp meter.
Use this clamp adaptor with Kewtech power analysers/other equipment to measure rated current to AC 5A.
The adaptor is a high efficiency clamp designed for use in power distribution facilities with maximum conductor size of 24mm.
Call 01642 931 329 or complete the form:
Conductor Size | 24mm diameter |
Rated Current | AC 5A (Max 50A) |
Output Voltage | AC 50mV/5A (Max 500mV/50A) (AC 10mV/A) |
Accuracy | ±0.5%rdg±0.1mV (50/60Hz) |
±1.0%rdg±0.2mV (40Hz to 1kHz) | |
Phase Shift | Within ±2.0° (45 to 65Hz) |
Withstand Voltage | AC 3540V for 5 seconds |
Cable Length | Approx 3m |
Output Connector | MINI DIN 6 pin |
Operating Temperature Ranges | 0 to 50°C, less than 85% RH (without condensation) |
Output Impedance | Approx 20Ω |
Applicable Standards | IEC 61010-1: 2001 |
IEC 61010-2-032: 2002 CAT III 300V, pollution degree 2 | |
Dimensions | 100 x 60 x 26mm (L x W x D) |
Weight | Approx 160g |