TPI GEK2021 Gas Essential Kit c/725L, 50, 312C & 368

This TPI GEK2021 includes a 725L Gas Sniffer, a 368 IR Thermometer, a 50 Volt Stick, and a 312C Pocket Thermometer.

TPI 725L Gas Detector

Designed for testing propane tanks, fittings, lines, heaters, and confined spaces for gas build-up, the TPI 725L is a high-sensitivity (40ppm methane) gas detector.

Compatible with several different gas types, including methane, butane, propane, gasoline, diesel, and kerosene, the tester comes with a long-length probe for insertion into the area you're testing.

The tick rate of the 725L can be adjusted and nullified to eliminate background gas concentrations and pinpoint the source of leaks.

TPI 725L Gas Detector Key Features

• 40PPM methane sensitivity
• Trace natural gas lines and fittings for leaks frame to failure
• Check and test propane tanks, fittings, lines, and heaters for leaks
• Test confined spaces for gas build-up
• Compatible with several gas types including methane, butane, propane, gasoline, diesel, and kerosene

TPI 368 Pocket Infrared Thermometer

This close-focus (1/8" - 1.5") thermometer can measure the temperature of a surface without contact.

One of the smallest infrared thermometers on the market, the TPI 368 is so small it can fit comfortably in your pocket. It's also incredibly easy to use, with just two buttons for operation.

This thermometer can measure temperature in selectable Celsius/Fahrenheit between a range of 7 to 248°F (-22 to 120°C). It will automatically hold a reading taken on the screen for ten seconds, or the MIN/MAX reading taken over time can be shown on the screen.

A dedicated AUTO mode sets the TPI 368 into an automatic routine that automatically and continuously scans surface temperatures in real time.

TPI 368 Pocket Infrared Thermometer Key Features

• Close focus operation - works from 1/8" to 1.5"
• Selectable measurement modes: Celsius and Fahrenheit
• Wide measurement range: 7 to 248°F (-22 to 120°C)
• Compact, pocket-sized design
• Automatic data hold
• MIN/MAX functions
• Automatic continuous measurement mode

TPI 50 AC Voltage Detector Key

Just hold this detector near a voltage source to detect the presence of AC voltage.

Shaped like a pen, the TPI 50 can detect a voltage across a range of 50 to 1000V AC. It is the upgraded version of TPI's 40 voltage detector and includes both audio and visual indicators of voltage presence.

It can be used in a wide variety of different applications, including checking AC voltage in switches, wall receptacles, and junction boxes.

TPI 50 AC Voltage Detector Key Features

• Non-contact AC voltage detection from 50 to 1000V
• No switch required - always on and ready for use
• Tip glows red when voltage is detected
• Buzzer indicator - doesn't react to static electricity for accuracy
• Powered by standard AAA batteries

TPI 312C Pocket Waterproof Penetration Thermometer

The TPI 312C is a waterproof penetration/immersion thermometer suitable for testing the temperature of food and liquids.

Easy to use with a long penetration tip, just insert the probe into whatever it is you need to test and a value will be displayed on the screen. Temperature can be measured between -58 and 300°F (-50 to 150°C) with an accuracy of ±2°F and resolution of 0.1°F.

This meter is IP67 rated and comes with a data hold function which temporarily freezes the last value taken on the screen.

TPI 312C Pocket Waterproof Penetration Thermometer Key Features

• Field calibratable
• Easy-to-read LCD screen
• Data hold function
• Penetration tip
• Auto power off when left idle
• Measurement range -58 and 300°F (-50 to 150°C)
• Celsius/Fahrenheit measurement modes