Reward Points
:
111
£133.20
£111.00
TPI 725L608-Kit Tightness Test Kit (Ultra Low Cost)
Description
The TPI 725L608-Kit delivers TWO great products combined in an A900 protective carry-case with a 608 manometer designed to perform the Tightness Test and the 725L pocket gas sniffer, ideal for pinpointing any leaks, if necessary.
TPI 725L Pocket Combustible Gas Leak Detector
Designed for testing propane tanks, fittings, lines, heaters, and confined spaces for gas build-up, the TPI 725L is a high-sensitivity (40ppm methane) gas detector.
Compatible with several different gas types, including methane, butane, propane, gasoline, diesel, and kerosene, the tester comes with a long-length probe for insertion into the area you're testing.
TPI 725L Combustible Gas Leak Detector
The tick rate of the 725L can be adjusted and nullified to eliminate background gas concentrations and pinpoint the source of leaks.
TPI 725L Gas Detector Key Features
- 40PPM methane sensitivity
- Trace natural gas lines and fittings for leaks frame to failure
- Check and test propane tanks, fittings, lines, and heaters for leaks
- Test confined spaces for gas build-up
- Compatible with several gas types including methane, butane, propane, gasoline, diesel, and kerosene
TPI 608 Single Input Digital Manometer
This single input manometer has a ±60" H20 range and can measure in four units - inH20, mbar, KPa, and mmH20.
Compact and easy to use, the TPI 608 can be used completely hands-free by using the built-in hanging hook or the magnets on the back to mount to a metallic surface.
TPI 608 Single Input Manometer
Additional features of this unit include one-touch zeroing, a backlight, and a 200-hour average battery life.
What's Included?
- 725L Pocket Combustible Gas Leak Detector
- 608 Single Input Digital Manometer
- A900 protective carry-case
Downloads
Tech Specs
TPI 725L Technical Specifications
| Sensitivity | > 40ppm Methane |
| Operating Temp | 32° to 104°F or 0° to 40°C |
| Response Time | Instantaneous |
| Battery | 1.5 volt, AAA Alkaline (2 each) |
| Battery life | 3 hours of continuous use |
| THIS INSTRUMENT is in compliance with EN 50 081-1:1992, EN 50 082-1:1992, IEC 801-2:1984, IEC 801-3:1984, IEC 801-4:1988 | |
TPI 608 Technical Specifications
| Measurement Range: | ±60” H2O |
| Display: | 4 Digit LCD with backlight |
| Input Type: | Single (¼” Barbed) |
| Resolution (max): | 0.01” H2O |
| Accuracy: | +/-1% of full scale |
| Functions: | One Touch Zero, Back-light, Selectable units of measure |
| Units of Measure: | 4 Units (inH2O, mbar, KPa, PSI) |
| Battery Type: | 9V alkaline |
| Battery Life: | 200 hours (Typical) |
| Auto Power Off | 40 minutes |
Reviews
Additional Information
| SKU | TPI-725L608-KIT |
|---|---|
| Manufacturer Part Code | 725L608-Kit |
| Country of Origin | South Korea |
