TM Electronics Premier Legionella Kit - Choice of K or T Type Probes

These TM Electronics Premier Water Temperature Testing Kit with MM7000-2D Barcode Scanning Thermometer, Surface and Immersion Probes, Fine Wire Probe, and accessories. Designed for use in monitoring the temperature of both running and standing water, as well as the surfaces of pipes and tanks that form part of a water system. The inclusion of the MM7000-2D Barcode Scanning thermometer enables the user to record locations, asset numbers, and personalised temperature alarms. Available with K or T type probes.

Features

• Measurement Range : -200 to + 1820°C (probe dependent)
• High Accuracy ±0.2°C ±0.1% of Reading
• Temperature Alarms: - user-programmable for personalised needs
• Stores up to 1,000 readings
• Readable 1D and 2D Bar Codes include (but are not limited to): -All UPC/EAN/JAN Codes, QR Code, EAN29 Codes, Code 39, and Code 128
• °C/°F Selectable
• Switchable thermocouple Types K / T / J / R / N / E / S
• IP65 Casing
• Low Battery Indication
• Self-Calibrating
• FREE UKAS Traceable Certificate at points 0, +50, and 150 °C*

*The certificate applies only to the handheld thermometer. Temperature points included in the free certificate cannot be changed or added to.

What's Included?

LEGK2 Premier Legionella Kit, T Type

• MM7000-2D ThermoBarScan 1D/2D Barcode Scanning Thermometer with Bluetooth
• TS07 Surface Probe
• TM03 General Purpose/Immersion Probe
• TA01 T Type PTFE Insulation Fine Wire Thermocouple
• TAPS - 20 x Thermo Attachment Pads
• LEGC01 - Standard Carry Case
• Rubber Boot for extra protection against damage
• 1 x PP3 Battery

LEGK3 Premier Legionella Kit, K Type

• MM7000-2D ThermoBarScan 1D/2D Barcode Scanning Thermometer with Bluetooth
• KA01 K Type PTFE Insulation Fine Wire Thermocouple
• KS20-S High-Speed Dual Probe
• TAPS - 20 x Thermo Attachment Pads
• LEGC01 - Standard Carry Case
• Rubber Boot for extra protection against damage
• 1 x PP3 Battery

Product Range

• TM Electronics LEGK2 Premier Legionella Kit, T Type
• TM Electronics LEGK3 Premier Legionella Kit, K Type

Probe Measurement Range

• TS07 High-Temperature Surface Probe: -50 to 400°C
• TM03 General Purpose/Immersion Probe: -200 to 400°C
• TA01 PTFE Thermocouple Fine Wire Sensor: -100 to 250°C
• KS20-S Dual Surface/Immersion Probe: -50 to 80°C*
• KA01 PTFE Thermocouple Fine Wire Sensor: -100 to 250°C
• *Note: The KS20-S probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces. If used on an uneven surface, there is a risk that the band will be weakened and deformed.

Probe Measurements

• TS07 High-Temperature Surface Probe: 110mm x 6mm
• TM03 General Purpose/Immersion Probe: 100mm x 3mm
• TA01 PTFE Thermocouple Fine Wire Sensor: 1m x 0.3mm
• KS20-S Dual Surface/Immersion Probe: 115mm x 12mm
• KA01 PTFE Thermocouple Fine Wire Sensor: 1m x 0.3mm