TM Electronics Legionella Kit with Dual Probe - Choice of K or T Type Probes

These TM Electronics Legionella Temperature Monitoring Kit include an MM2008 handheld thermometer and Dual Surface/Immersion probe, fine wire probe, and accessories. The kits may be used to monitor the temperature of both running and standing water, as well as the surface of pipes and tanks that form part of a water system. Available with K or T type probes.

Features

• Single Input Thermocouple
• Integral Timer for 1 and 2-minute countdown
• Measurement Range: -200 to +1,372°C (probe dependant)
• Accuracy: - ± 0.1% of Reading ± 0.2°C
• °C/°F Selectable
• IP67 Waterproof Casing
• Selectable Thermocouple Types: K & T
• Low Battery Indication
• Self-Calibrating
• FREE UKAS Traceable Certificate at points 0, +50, and 150 °C*

*The certificate applies only to the handheld thermometer. Temperature points included in the free certificate cannot be changed or added to.

What's Included?

LEGK4 Legionella Kit with Dual Probe, T Type

• MM2008 Legionella Thermometer with Integral Timer
• TS01-S Dual Surface Immersion Probe
• TA01 Fine Wire Probe
• TAPS - 20 x Thermo Attachment Pads
• LEGC01 - Standard Carry Case
• TEMPRB - Temperature Log Book
• Rubber Boot for extra protection against damage
• 1 x PP3 Battery
• Legionella Booklet

LEGK6 Legionella Kit with Dual Probe, K Type

• MM2008 Legionella Thermometer with Integral Timer
• KS20-S Dual Surface/Immersion Probe
• KA01 Fine Wire Probe
• TAPS - 20 x Thermo Attachment Pads
• LEGC01 - Standard Carry Case
• TEMPRB - Temperature Log Book
• Rubber Boot for extra protection against damage
• 1 x PP3 Battery
• Legionella Booklet

Product Range

• TM Electronics LEGK4 Legionella Kit with Dual Probe, T Type
• TM Electronics LEGK6 Legionella Kit with Dual Probe, K Type

Probe Measurement Range

• TS01-S: -50 to 80°C*
• TA01: -100 to 250°C
• KS20-S: -50 to 80°C*
• KA01: -100 to 250°C
• *Note: The KS20-S & the TS01-S probes only require light pressure to give a true reading and are suitable for smooth, clean surfaces. If used on an uneven surface, there is a risk that the band will be weakened and deformed.

Probe Measurements

• TS01-S: 110 x 10mm
• TA01: 1 Meter x 0.3mm
• KS20-S: 115 x 12mm
• KA01: 1m x 0.3mm