Time Electronics Voltage / Current / Loop Calibrator

If you have ever used a calibrator, you may have found that you struggle to work because it doesn’t have a display to show you what is going on. But you won’t find this problem with the Time 1048 Voltage/Current/Loop Calibrator as it comes with an easy to read and large 4.5-digit LCD display. This will clearly show to you the actual output, and this won’t be affected if there is the possibility of the connected load exceeded specifications. This display will also show you if the battery is getting too low.

This portable instrument can perform the measurement of current levels as well as being able to detect DC voltage. If you are in one of the following professions: process control engineers, service engineers, R&D engineers or a calibration technician, then the simple operation and the high performance of this calibrator will suit you well. It also has an incredibly high accuracy of 0.02%.

In order to suit any situation that you are working in, this DC voltage device can operate in three different modes. When it is the measurement mode, it is very easy for you to choose the range and function and whilst you do this, the accurate measured input will be shown to you. When it is in the second source mode, the DC voltage should be up to 22 volts and the current measure as high as 22mA. This can also be generated in three ranges for you. The final mode is the current source mode, which allows this device to have a compliance voltage with a high level of 24 volts which makes it most ideal for powering process loops.

The Time 1048 Voltage/Current/Loop Calibrator is encased inside its own pocked sized ABS case as well as coming with a carrying case. It is also powered by a single 9 volt battery or you can choose the external 12 volt DC power supply.