Thermal & Night Vision Lenses
Selection of thermal camera lenses suitable for changing the field of view of thermal imagers. Includes thermal lenses from Fluke and FLIR available in varying degrees and suitable for different thermal models.
Find out more about Thermal & Night Vision Lenses below.
- Suitable for facilitating a connection between Pulsar’s F135/ F155 and the user’s riflescope
- Transforms the user’s day weapon into a night weapon
- 42mm diameter
- Facilitates a connection between the user’s weapon and Pulsar’s F135/F155 Night Vision Attachments
- Suitable for transforming the user’s daytime weapon into a night vision weapon
- 50mm diameter
- Ideal for extending the scope-for-use of a daytime weapon
- Facilitates a connection between objective lens and either a Pulsar F135 or F155
- 56mm diameter
- Facilitates transformation into a night vision weapon
- For use with Hikmicro’s Thunder Handheld Thermal Monoculars
- Converts Hikmicro’s Thunder Monoculars into clip-on scopes
- Suitable for FLIR 80-degree lens
- Quickly inspect through existing ports
- Minimise arc flash risk
- MSX-enabled visual camera
- Suitable for FLIR A400/A700 Series cameras
- IP lens hood
- FLIR A400/A700 Smart Sensor configuration
- FLIR A400/A700 Image Streaming configuration & FLIR GF77a
- Suitable for the FLIR VS80 Videoscope
- 7 versatile camera probes
- Field-of-view: 15°
- 1.7x magnification
- Supplied with a lens case
- 4 Rings
- Suitable for FLIR A67xx Science Grade Cameras
- Two models with different magnifications and detection distances
- Waterproof
- Quick bayonet mounting
- Optional thermal telephoto lens for FLIR E76, E86, E96, T5xx, & T8xx thermal cameras
- 14-degree field of view
- Includes carrying case
- Optional thermal lens for FLIR Exx, T5xx, & T8xx series thermal cameras
- 24° field of view
- Includes case
- Interchangeable thermal lens for use with FLIR Exx, T5xx, & T8xx series thermal cameras
- 42 degree
- Includes carrying case
- 14° or 42° IR lens
- Suitable for FLIR A400/A700 series cameras
- 24-degree LWIR lens
- Suitable for FLIR A400/A500/A700 science cameras
- 17mm focal length
- Wide-angled IR lens
- FOV: 46 ° H x 34 ° V
- Suitable for TiX560, TiX520, Ti400, and Ti200
- 2x Telephoto IR Smart Lens
- FOV: 12 ° H x 9 ° V
- Suitable for TiX560, TiX520, Ti400, Ti300, Ti200
- 24-degree IR lens
- Suitable for FLIR A700 cameras
- 18mm focal length
- Flexible, field-replaceable 2m probe
- Supports Visual, IR and MSX imaging modes
- For use with FLIR’s VS290 Thermal Imaging Videoscope
- Up 1.7x magnification
- Easy to install
- Includes protective lens case
- Case included
- Compatible with the EXXbx Series
- 9.66mm, 45°
- Suitable for FLIR T500-Series and T800-Series cameras
- 14°and 24° IR lens
- f=17/29 mm
- Instant switching between wide and narrow FOVs
- Improves safety and efficiency
- Ideal for large equipment
About Lenses & Lens Adaptors
A camera is nothing without its lens. The lens is used to let light into the camera and construct an image, and this rule also applies to thermal imaging cameras.
Although thermal cameras don't use normal visible light to make an image and instead rely on IR light to construct a reading of the thermal energy around the camera, the lens is still needed to let this IR radiation into the camera and allow the camera to construct a thermal image.
Many models of thermal camera feature thermal lenses that are built into the framework of the camera, but many others also feature the ability to take out the lens and swap it for another. Depending on the lens that's equipped into the camera the capabilities of the camera might change; some thermal lenses are designed to narrow the field of view of a thermal camera, while others are designed to widen the view and allow users to pack more detail into every image.
Thermal lenses can also be used to extend the range of the camera, allowing you to get in closer to the target and spot differences in temperature much easier.
