Reward Points
:
189
£226.80
£189.00
TestSafe TSAM5-HVACPRO Anemometer with Temp, RH & CO2
More than just a standard anemometer - this multifunctional instrument measures air velocity, volume and also tests CO2 (carbon dioxide) content, temperature, humidity, dew point and wet bulb temperature!
If you work as an HVAC technician, the TestSafe TSAM5-HVACPRO will allow you to easily test ducts and other air equipment for correct installation. Featuring a 10cm, built-in vane sensor, the TSAM5 can measure wind speed from 0.2 to 30m/s. It's also possible to use the tester to measure air volume; simply enter the duct's dimensions into the tester beforehand and it'll do the rest.
TestSafe's TSAM5 is also compatible with round and square cones (sold separately) for easier measurements in ducts without the need to enter the outlet's dimensions.
This meter will allow you to carry out comprehensive air quality tests; as well as calculating air flow and volume, you can use the TSAM5 to verify that there's not high levels of carbon dioxide present, or if air conditioning units are outputting the correct temperature. You can also calculate the temperature at which water vapour will condense (the dew point) or calculate wet bulb temperature.
The TSAM5 is packed with functionality including selectable imperial or metric wind speed units, MAX/MIN display, time weighted average auto calculations, a data hold function which will freeze the current vaulue on the screen, a built-in backlight and much more.
TestSafe TSAM5-HVACPRO Anemometer Key Features
- Multifunctional - measure air velocity, volume, CO2, temperature, humidity, dew point and wet bulb temperature
- Wind speed measurement range from 0.2 to 30m/s
- CO2 (carbon dioxide) measurement range from 0 to 9999ppm
- Air temperature range from -20 to 60°C
- Air relative humidity range from 0.1 to 99.9% RH
- 10cm diameter vane sensor built into the top of the unit
- Automatic airflow cone recongnition - compatible with optional square or rounded cones (sold separately)
- NDIR waveguide technology CO2 sensor built in
- Built-in thermistor for accurate measurements of temperature and humidity
- Measure wind speed in imperial (fpm/CFM) or metric units (m/s/CMM) (selectable)
- Display MAX/MIN values taken over a period of time
- Unlimited points average auto calculation
- Time weighted average auto calculation
- Data hold function freezes current value on the screen
- Suitable for both inlet and outlet measurements
- Low battery indicator
- Blue backlight for use in darkened areas
- Powered by 4 x AAA batteries
What's Included?
- TestSafe TSAM5 Anemometer
- Battery
- Manual
- Hard Carrying Case
TestSafe TSAM5 Technical Specifications
| Wind Speed Range | 0.2 to 30M/S |
| Wind Speed Accuracy | ±(1.5% of reading + 0.3m/s) for under 20m/s ±(3% of reading + 0.3m/s) for above 20m/s |
| CO2 Range | 0 to 9999ppm (5001 to 999ppm out of scale range) |
| CO2 Accuracy | ±30ppm±5% of reading (0 to 5000ppm) |
| Air Temperature Range | -20 to 60°C |
| Air Temperature Resolution | 0.1°C/°F |
| Air Temperature Accuracy | ±0.6°C |
| Air Relative Humidity Range | 0.1% RH to 99.9% RH |
| Air Relative Humidity Resolution | 0.1% RH |
| Air Relative Humidity Accuracy | ±3% RH (at 25°C, 10 to 90° RH, others ±5% RH) |
| Temperature Response Time | 60 seconds (typical) |
| Air RH% Response Time | 60 seconds (typical) |
| LCD Update | Every second |
| Wet Bulb Temperature Display | -20 to 59.9°C |
| Dew Point Temperature Display | -5 to 59.9°C |
| Air Volume Display | 0 to 99999m³/minute |
| Air Volume Resolution | 0.1 (0 to 9999.9) or 1 (10000 to 99999) |
| LCD Size | 32.5 (H) x 54mm (W) |
| Operating Temperature | 0 to 50°C |
| Operating Relative Humidity | Humidity <80% |
| Storage Temperature | -10 to 50°C |
| Storage Relative Humidity | <90% |
| Dimensions | 169 x 106 x 51mm |
| Weight | 200g |
| Battery | 4 x AAA |
Reviews
Additional Information
| SKU | TSAM5-HVACPRO |
|---|---|
| Manufacturer Part Code | 8919 |
| Model Ref | TSAM5-HVACPRO |
