Designed for testing AC electric vehicle charging stations with type 2 connectors in accordance with applicable regulations, the Sonel EVSE-01 Adapter features two simulation modes:
- Proximity Pilot (PP) simulates the charging cable
- Control Pilot Line (CP) mimics vehicle connection status
The Sonel EVSE-01 Adapter will bring the EV charging point into various operating statuses enabling you to carry out the following measurements and checks:
- ZS fault loop impedance
- RISO insulation resistance
- Parameters of RCDs
- 1-phase and 3-phase tests with and without ventilation
Furthermore, to facilitate diagnostics, one of the Sonel EVSE-01 Adapter’s sockets is fitted with a pulse width modulation signal (PWM).
The Sonel EVSE-01 Adapter is a simple- and quick-to-use EV charging station tester. It is designed to be used with your Sonel MPI-540/MPI-540-PV Multifunction Tester. Please see the video below for more information about using the Sonel EVSE-01 Adapter with Sonel’s MPI-540 Multifunction Tester to check vehicle charging stations.
Sonel EVSE-01 Adapter Key Features
- Test AC electric vehicle charging stations with type 2 connectors in accordance with relevant regulations
- Proximity Pilot (PP) simulates the charging cable
- Control Pilot Line (CP) mimics vehicle connection status
- ZS fault loop impedance
- RISO insulation resistance
- Parameters of RCDs
- 1-phase and 3-phase tests with and without ventilation
- One of the sockets is fitted with a PWM signal to enable diagnostics
- A simple- and quick-to-use EV charging station tester
- Designed for use with Sonel MPI-540/540-PV MFTs
What’s Included?
- Sonel EVSE-01 Adapter
- Carry Case
- User Manual
Sonel EVSE-01 Adapter Technical Specifications
Measurement category according to EN 61010-1 |
CAT II 300 V | |
Ingress protection according to EN 60529 |
IP40 | |
Pollution degree | 2 | |
Input voltage | 400 V (3-phase) | |
Frequency | 50 Hz | |
simulation of charging cable PP | open circuit, 13 A, 20 A, 32 A, 63 A | |
vehicle connection simulation CP |
state A | vehicle not connected |
state B | vehicle connected, not charging | |
state C | vehicle connected, charging without ventilation | |
state D | vehicle connected, charging with ventilation | |
state E | error - CP short to PE | |
socket types | ▪ measuring sockets: L1, L2, L3, N, PE ▪ 1-phase socket ▪ CP signal socket - PWM communication |
|
test lead (length) | EVSE | 1 m |
MPI | 0.5 m | |
operating temperature | -5...+45ºC | |
storage temperature | -20...+60ºC | |
dimensions | 220 x 100 x 60 mm | |
weight | 1.4 kg |
Sonel EVSE-01 Adapter Functional Comparison
MPI-540-PV MPI-540 MPI-535 |
MPI-530-IT MPI-530 MPI-525 MPI-520 |
MPI-506 | MPI-502 | |
Auto measurements | ✔ | ✖ | ✖ | ✖ |
Automatic threephase measurement via multiplug |
✔ | ✖ | ✖ | ✖ |
Visual inspection | ✔ | ✖ | ✖ | ✖ |
Fault loop ZL-PE, ZL-N parameters measurement |
✔ | ✔ | ✔ | ✔ |
6 mA RCD test | ✔ | ✖ | ✖ | ✖ |
RCD test | AC, A, F, B, B+, EV |
AC, A, F, B, B+ |
AC, A | AC, A |
Insulation resistance RISO measurement |
✔ | ✔ | ✔ | ✖ |
Measurements report | ✔ | ✔ | ✔ | ✔ |
Reviews
SKU | EVSE-01 |
---|---|
Manufacturer Part Code | EVSE-01 |