Sika TP 18 Dry Block Basic Temperature Calibrator (RT to 200°C or 850°C) - Choice of Model

Dry Block Temperature Calibrators

Sika TP 18 200 E & TP 18 200 E-115V Models

The Sika TP 18 200 E is a bit different from other calibrators in the Sika TP series - this model is more compact, ideal for benchtop use, and gives the user easier access to the temperature block.

A dry block calibrator, the TP 18 200 E is designed for heating up without the use of external calibration liquid (as used in other calibrators with micro baths). In practice, this allows faster heating without the need to insert liquid, allowing the technician to work much more efficiently.

Blocks are quite narrow with a diameter of 18mm and a depth of 100mm. Adapter sleeves are available to cater to other temperature sensors which may not fit directly into the block (sold separately - please call for information).

An integrated dual-line, the 4-digit display shows temperature information at all times between a range of 0 to 200℃ with a resolution of 1℃. Measurements are accurate to within ±1℃ with a stability of 0.1℃.

Sika TP 18 200 E Dry Block Temperature Calibrator Key Features

• Compact design optimised for use on the bench
• Integrated carrying handle for easy transportation
• Internal sensor
• A dry block calibrator doesn't require the use of calibration liquid
• Temperature range of reference temperature to 200℃
• Accuracy of ±1℃
• Stability of ±0.1℃
• Block diameter of 18mm with a depth of 100mm
• 2-line, 4-digit red/green display

Sika TP 18 850 E Model

One of Sika's most uniquely-designed calibrators, the TP 18 850 E consists of two separate connected enclosures - one of which is an HT alloy dry block with a borehole, and the other is a control unit for the dry block.

The controller unit includes a switch for mains power and a switch that controls an internal fan for cooling purposes. A 2-line, 4-digit, the 7-segment LED screen is also built into the control unit which shows block temperature levels and the set value.

The dry block section of the calibrator has a diameter from 18 to 28mm and a depth from 100 to 200mm, catering to a wide variety of different temperature sensors and equipment.

Moving between different calibration points? This calibrator also comes with a carrying handle for transportation purposes.

Sika TP 18 850 E Dry Block Temperature Calibrator Key Features

• Separate control unit and dry block unit
• Internal sensor
• Wide temperature range from RT to 850℃
• High accuracy and stability
• Large size block with wide diameter and depth
• 2-line, 4-digit LED display shows the set temperature and current temperature
• Carrying handle for transportation