Siglent SSA3000X Spectrum Analyser with Choice Of Bandwidth

*** Please note that the FREE TG-SSA3000X Generator Licence is enabled at the factory. ***

Note 2 models are available, please select from the drop-down above: 

Siglent SSA3021X: 9 kHz to 2.1 GHz  Spectrum Analyser
Siglent SSA3032X: 9 kHz to 3.2 GHz  Spectrum Analyser

The Siglent SSA3000X Spectrum Analysers from Siglent is lightweight and durable with an easy to user interface and 10.1” 1024 x 600 matte display to easily view results. With a fast boot up time and quick reliable results this is suitable for use in; research & development, education, production, maintenance, laboratories and troubleshooting RF issues and more.

2 models are available and are both based on a swept superheterodyne design that provides high but affordable quality packed full of features to carry out various tests and one button functions for ease of use, these include:

• Frequency: Sets the Center Freq\Start Freq\Stop Freq\Freq Step
• Span: Sets the Span\Full Span\Zero Span\Zoom In\Zoom Out\Last Span
• Amplitude: Used to Set the REF Level\Attenuator\Preamp\Amplitude
• Auto-Tune: Automatically sets the optimal parameters according to the characteristics of the signal
• BW: Used to adjust the RBW,VBW,VBW/RBW Rate, Average Type (Logpower\Power\Voltage)
• Trace: Selects Trace\Trace setup\Trace math
• Sweep: Selects the Sweep time\Sweep Rule\Sweep Mode
• Detect: Selects the Detector type
• Trigger: Used in Selecting the Free Trigger\Video Trigger/ External Trigger
• Limit: Sets the Pass\Fail Limit
• TG: Sets the TG Level\TG Level offset\Normalize*
• Demod: Used to set the Parameters of the AM and FM
• Marker: Used to Select the Mark Trace and Marker math
• Marker→: Sets all types of Markers to Freq
• Marker Fn: Selects the Noise Marker\N dB BW\Freq Counter\Read out of Freq
• Peak: Searches for the Peak Signal and Counts the Peak Frequency
• Meas: Selects the Channel Power\ACPR\Occupied BW\T-Power
• Meas Setup: Used to Choose the Parameters Details of Channel Power\ACPR\Occupied BW\T-Power
• System: Selects the Language\Power on/Preset\Interface\Calibration\system information\Data&Time\Self Test
• Mode: Selects the Spec Analyzer\EMI\Reflection Meas
• Display: Used to Adjust the Grid Brightness\Display Line
• File: Use to Select the Filesystem
• Preset: Sets the system to default status
• Couple: Used to Select the RBW\VBW\Attenuator\Freq Step\Sweep time mode
• Help: Help Information Switch
• Save: Save Shortcut Key 

Key Features

• -161 dBm/Hz Displayed Average Noise Level (Typ.) - Low Average Noise level allows you to observe lower power signal to help find harmonics from a signal or interference
• 10 Hz Minimum Resolution Bandwidth (RBW) - Lower resolution bandwidth helps to distinguish 2 signals that are close together
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) – Enables you to accurately evaluate an RF Source as the phase noise needs to be lower than the phase noise of the transmitter
• 10.1 lnch WVGA（1024x600 Display)  - Resilient and high-quality screen
• Progress bar
• Shows up to 4 traces simultaneously and can be configured separately – Helpful for troubleshooting
• Save onto USB stick
• (TG) Tracking generator hardware is included within the unit. (a Licence key is required to use it)
• Advanced Digital IF Technology – Better accuracy, better resolution and faster
• Standard Preamplifier
• Total Amplitude Accuracy < 0.7 dB

What’s included?

• Power cord
• Quick start guide
• USB cable
• CD-ROM with software and documentation
• Calibration certificate

Optional Add-ons

• Up to 3.2 GHz Tracking Generator Kit (Opt.)
• Reflection Measurement Kit (Opt.)
• Advanced Measurement Kit (Opt.)
• EMI Pre-compliance Measurements Kit (Opt.)