Reward Points
:
7776
£7,776.00
£6,480.00
Home
Electrical, EV & Electronic
Oscilloscopes & Function / Waveform Instruments
Bench Oscilloscopes
Siglent SDS6000A Series Super Phosphor Oscilloscopes (500MHz, 1GHz, 2GHz) - Choice of Model
Description
The SDS6000A series Digital Storage Oscilloscopes are available in bandwidths of 2 GHz, 1 GHz, and 500 MHz, have a sample rate of 5 GSa/s (10 GSa/s ESR) at each channel, a maximum record length of 500 Mpts/ch, and display up to 4 analogue channels + 16 digital channels mixed signal analysis ability.
The SDS6000A series employs Siglent's SPO technology with a maximum waveform capture rate of up to 170,000 wfm/ s (normal mode, up to 750,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a colour temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering.
Tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis, and Eye/Jitter Analysis allow for extended waveform records to be captured, stored, and analysed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding, are also features of the SDS6000A.
The large 12.1" display capacitive touchscreen supports multi-touch gestures, with the addition of a user-friendly UI design, which can greatly improve operation efficiency. It also supports mouse control and remote web control over LAN.
Key Features
- 4 analogue channels, up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each channel
- Low background noise, supports 0.5 mV/div to 10 V/div vertical scales
- SPO technology
- Waveform capture rates up to 170,000 wfm/s(normal mode), and 750,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and colour temperature display modes
- 500 Mpts Record length in total for all 4 channels
- Digital trigger system
- Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone Trigger simplifies advanced triggering
- Serial bus triggering and decoder, Standard: I2C, SPI, UART, CAN, LIN Optional: CAN FD, FlexRay, I2S, MILSTD-1553B, SENT, and Manchester
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
- History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
- Automatic measurements on 50+ parameters support statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref
- 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), support formula editor
- Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis and Eye/Jitter Analysis
- High-Speed hardware-based Average, Hi-Res; High-Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks
- 16 digital channels (optional)
- 25 MHz function / arbitrary waveform generator, built-in multiple predefined waveforms
- Large 12.1” TFT-LCD display with 1280 * 800 resolution; Capacitive touch screen supports multi-touch gestures
- Interfaces include: USB Hosts, a USB Device (USBTMC), LAN (VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI)
- Built-in web server supports remote control over the LAN port using a web browser. Supports SCPI remote control commands. Supports external mouse and keyboard
| Channels | Bandwidth | Real Time Sampling Rate | Capture Rate | Memory Depth | |
|---|---|---|---|---|---|
| SDS6054A | 4 + EXT | 500MHz | 5 GSa/s (10 GSa/s ESR) per channel | 170,000wfm/s (Normal Mode) 750,000wfm/s (Sequence Mode) | 500Mpts (Single CH) 250Mpts (Dual CH) 125Mpts (CH 3 or 4 CH) |
| SDS6104A | 4 + EXT | 1GHz | 5 GSa/s (10 GSa/s ESR) per channel | 170,000wfm/s (Normal Mode) 750,000wfm/s (Sequence Mode) | 500Mpts (Single CH) 250Mpts (Dual CH) 125Mpts (CH 3 or 4 CH) |
| SDS6204A | 4 + EXT | 2GHz | 5 GSa/s (10 GSa/s ESR) per channel | 170,000wfm/s (Normal Mode) 750,000wfm/s (Sequence Mode) | 500Mpts (Single CH) 250Mpts (Dual CH) 125Mpts (CH 3 or 4 CH) |
Offers
Free Precision Screwdrivers
- Tolsen 7 Piece Insulated Precision Screwdriver Set - TS-9900006, typically £9.99
Tech Specs
| Acquire System (Analogue Channel) | |
|---|---|
| Sample Rate | 5 GSa/s (10 GSa/s (ESR*1)) @ each channel |
| Memory Depth | 500 Mpts/ch (single-channel) 250 Mpts/ch (dual-channel) 125 Mpts/ch (3 or 4 channels) |
| Waveform update rate | Normal mode: up to 170,000 wfm/s Sequence mode: up to 750,000 wfm/s |
| Intensity grading | 256-level |
| Peak Detect | 200 ps |
| Average | 4, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192 |
| Hi-res | Enhanced bit: 1, 2, 3, 4, 5, 6, 7, 8 bit |
| Sequence | Up to 80,000 segments, the interval between triggers = 1.3 μs min. |
| History | Up to 80,000 frames |
| Interpolation | sinx/x, x |
| Vertical System (Analogue Channel) | |
| Bandwidth (-3dB) @50 Ω | 2GHz/1GHz/500MHz |
| Rise time (typical) @50 Ω | 230ps/350ps/550ps |
| Resolution | 8-bit, up to 16-bit in Hi-Res mode |
| Bandwidth in HiRes mode | 9-bit: 0.25*Sample rate, up to the analog bandwidth 10-bit: 0.115*Sample rate, up to 1.15 GHz, limited by the analog bandwidth 11-bit: 0.055*Sample rate, up to 550 MHz, limited by the analog bandwidth 12-bit: 0.028*Sample rate, up to 280 MHz 13-bit: 0.014*Sample rate, up to 140 MHz 14-bit: 0.007*Sample rate, up to 70 MHz 15-bit: 0.0035*Sample rate, up to 35 MHz 16-bit: 0.0017*Sample rate, up to 17 MHz |
| Range | 8 divisions |
| Vertical scale (probe 1X) | 1 MΩ: 0.5 mV/div - 10 V/div 50 Ω: 0.5 mV/div - 1 V/div |
| DC gain accuracy | ±1.5% |
| Offset accuracy | ± (1% of the offset setting + 0.5 full scale + 0.02% of max offset + 1mV) |
| Offset range (probe 1X) | 1 MΩ: 0.5 mV/div ~ 5 mV/div: ±1.6 V; 5.1 mV/div ~ 10 mV/div: ±4 V; 10.2 mV/div ~ 20 mV/div : ±8 V; 20.5 mV/div ~ 100 mV/div: ±16 V;102 mV/div ~ 200 mV/div: ±80V; 205 mV/div ~ 1 V/div: ±160 V;1.02 V/div ~ 10 V/div: ±400 V 50 Ω: 0.5 mV/div ~ 5 mV/div: ±1.6 V; 5.1 mV/div ~ 10 mV/div: ±4 V; 10.2 mV/div ~ 20 mV/div: ±8 V; 20.5 mV/div ~ 100 mV/div: ±10 V |
| Bandwidth limit | Hardware Bandwidth limit: 20MHz, 200MHz |
| Coupling | DC, AC, GND |
| Impedance | (1 MΩ ±2%) || (20 pF ±3 pF) 50 Ω: 50 Ω ±2% |
| Low-frequency response (AC coupling -3 dB) | 6 Hz (typical) |
| Overshoot (100 mV/div, 150 ps edge @50 Ω, typical) | 15%/10%/5% |
| Max. Input voltage | 1 MΩ ≤ 400 Vpk(DC + AC), DC ~ 10 kHz 50 Ω ≤ 5 Vrms, ±10V Peak |
| SFDR | ≥ 45dBc |
| CH to CH Isolation (@50Ω) | 70 dB up to 200 MHz 60 dB up to 500 MHz 50 dB up to 1 GHz 40 dB up to 2 GHz |
| Probe Attenuation | 1X, 10X, 100X, custom |
| Horizontal System | |
| Time Scale | SDS6204A: 0.1 ns/div - 1000 s/div SDS6104A: 0.2 ns/div - 1000 s/div SDS6104A: 0.5 ns/div - 1000 s/div |
| Range | 10 divisions |
| Display Mode | Y-T, X-Y, Roll |
| Roll Mode | ≥ 50 ms/div |
| Skew (CH1~CH4) | < 100 ps |
| Time Base Accuracy | ±2 ppm initial (0~50℃);±0.5 ppm 1st year aging; ±3 ppm 20-year aging |
| Trigger System | |
| Mode | Auto, Normal, Single |
| Level | Internal: ±4.5 div from the center of the screen EXT: ±0.61 V EXT/5: ±3.05 V |
| Hold Off Range | By time: 8 ns ~ 30 s (8 ns step) By event: 1 ~ 108 |
| Coupling | CH1~CH4 DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 15 Hz LFRJ: Attenuates the frequency components below 2.4 MHz HFRJ: Attenuates the frequency components above 1.3 MHz Noise RJ: Increases the trigger hysteresis EXT DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 15 Hz LFRJ: Attenuates the frequency components below 2.5 MHz HFRJ: Attenuates the frequency components above 1.3 MHz |
| Accuracy (typical) | CH1~CH4: ±0.2 div EXT: ±0.3 div |
| Jitter | CH1~CH4: < 9 ps RMS (typical) for ≥ 300 MHz sine and ≥ 6 divisions peak to peak amplitude for vertical gain settings from 2.5 mV/div to 10 V/div < 5 ps RMS (typical) for ≥ 500 MHz sine and ≥ 6 divisions peak to peak amplitude for vertical gain settings from 2.5 mV/div to 10 V/div EXT: < 200 ps rms |
| Displacement | Pre-Trigger: 0 ~ 100% memory Delay-Trigger: 0 ~ 5,000 div |
| Zone | Up to 2 zones Source: CH1~CH4 Property: Intersect, Not Intersect |
| Edge Trigger | |
| Source | CH1~CH4/EXT/(EXT/5)/AC Line/D0~D15 |
| Slope | Rising, Falling, Rising & Falling |
| Slope Trigger | |
| Source | CH1~CH4 |
| Slope | Rising, Falling |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Pulse Width Trigger | |
| Source | CH1~CH4/D0~D15 |
| Polarity | +wid, -wid |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Video Trigger | |
| Source | CH1~CH4 |
| Standard | NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom |
| Synchronization | Any, Select |
| Trigger Condition | Line, Field |
| Window Trigger | |
| Source | CH1~CH4 |
| Window type | Absolute, Relative |
| Interval Trigger | |
| Source | CH1~CH4/D0~D15 |
| Slope | Rising, Falling |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Dropout Trigger | |
| Source | CH1~CH4/D0~D15 |
| Timeout type | Edge, State |
| Slope | Rising, Falling |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Runt Trigger | |
| Source | CH1~CH4 |
| Polarity | Positive, Negative |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Pattern Trigger | |
| Source | CH1~CH4/D0~D15 |
| Pattern Setting | Don't Care, Low, High |
| Logic | AND, OR, NAND, NOR |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Qualified Trigger | |
| Type | State, State with Delay, Edge, Edge with Delay |
| Qualified Source | CH1~CH4/D0~D15 |
| Edge Trigger Source | CH1~CH4/D0~D15 |
| Nth Edge Trigger | |
| Source | CH1~CH4/D0~D15 |
| Slope | Rising, Falling |
| Idle time | 8ns ~ 20s, Resolution = 1 ns |
| Edge Number | 1 ~ 65535 |
| Delay Trigger | |
| Source A | CH1~CH4/D0~D15 |
| Source B | CH1~CH4/D0~D15 |
| Slope | Rising, Falling |
| Limit range | <, >, in range, out of range |
| Time range | 2ns ~ 20s, Resolution = 1 ns |
| Serial Trigger | |
| Source | CH1~CH4/D0~D15 |
| Protocol | Standard: I2C, SPI, UART, CAN, LIN Optional: CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT |
| I2C | Type: Start, Stop, Restart, No Ack, EEPROM, Address & Data, Data Length |
| SPI | Type: Data |
| UART | Type: Start, Stop, Data, Parity Error |
| CAN | Type: All, Remote, ID, ID+Data, Error |
| LIN | Type: Break, Frame ID, ID+Data, Error |
| CAN FD (Optional) | Type: Start, Remote, ID, ID+Data, Error |
| FlexRay (Optional) | Type: TSS, Frame, Symbol, Errors |
| I2S (Optional) | Type: Data, Mute, Clip, Glitch, Rising Edge, Falling Edge |
| MIL-STD-1553B (Optional) | Type: Transfer, Word, Error, Timing |
| SENT (Optional) | Type: Start, Slow channel, Fast channel, Error |
Reviews
Additional Information
| SKU | SDS6000A-SERIES |
|---|
