These four-channel oscilloscopes are easy-to-use and equipped with an eclectic array of measurement, maths and data analysis modes and functions. There and three four-channel Siglent SDS5004X Digital Storage Oscilloscopes available which vary in regards to their bandwidths, please see the table below for further details.
Stock Code | Bandwidth | Supplied Probes |
SDS5034X | 350MHz | 4x 350MHz Probes |
SDS5054X | 500MHz | 4x 500MHz Probes |
SDS5104X | 1GHz | 2x 1GHz Probes |
Please note that the Siglent SDS5004X Digital Storage Oscilloscopes can be purchased with the following OPTIONAL features (please call for details prior to purchase):
- 16 digital channels (max sampling rate: 1.25 GSa/s, max record length: 62.5 Mpts)
- 25MHz function/ arbitrary waveform generator with built-in multiple predefined waveforms
All of the Siglent SDS5004X Digital Storage Oscilloscopes have a maximum real-time sampling rate of 5GSa/s and a maximum record length of 250 Mpts/ch. Additionally, Siglent’s SPO technology equips these scopes with a maximum waveform capture rate of 110 000 wfm/s in Normal mode and 500 000 wfm/s in Sequence mode.
Sequence mode, as well as the Siglent SDS5004X Digital Storage Oscilloscopes’ History, Search and Navigate functions, allows the user to capture, save and analyse extended waveforms. The History function can capture waveforms up to 100 000 frames in length. The Sequence mode divides the waveform into multiple segments according to the user-defined trigger conditions. The Sequence mode can divide the waveform into a maximum of 100 000 segments and includes very little dead time between each segment to ensure that qualifying events are captured.
In addition to History, Search and Navigate, the Siglent SDS5004X Digital Storage Oscilloscopes includes data analysis functions such as Counter, Bode Plot and Digital Voltmeter. These scopes have a voltage range of 0.5mV/div to 10V/div and low background noise. It also includes a Maths function which consists of 2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential and square root and is able to support the formula editor. The Siglent SDS5004X Digital Storage Oscilloscopes also support a high-speed, hard-ware based Mask Test function with a mask editor tool for creating user-defined masks, and power analysis high-speed, hardware-based Average, ERES (Enhanced Resolution) functions.
Additionally, the Automatic Measurement function can be used to take automatic measurements for over fifty parameters. The Automatic Measurement function supports statistics with histogram, trend, gating measurements, maths measurements, history measurements and ref measurements.
Furthermore, the Siglent SDS5004X Digital Storage Oscilloscopes include an innovative trigger system with high sensitivity and low jitter. The Siglent SDS5004X Digital Storage Oscilloscopes’ trigger system is able to support a variety of trigger modes including Serial Bus Triggering which, in turn, supports I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD1553B decoding protocols. Other trigger models supported by the Siglent SDS5004X Digital Storage Oscilloscopes, include Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported).
Commonly used functions can be accessed quickly and easily via the user-friendly, one-button shortcuts. The Siglent SDS5004X Digital Storage Oscilloscopes have been designed to ensure they can be operated easily and in a variety of ways, for instance, their capacitive touchscreens support multi-touch gestures. Moreover, these scopes can be operated using an external mouse and keyboard and include an integrated web server for remote operation via the LAN port and a web browser. Alternatively, the Siglent SDS5004X Digital Storage Oscilloscopes can be operated remotely using SCPI control commands.
In addition to providing access to the Siglent SDS5004X Digital Storage Oscilloscopes modes and functions, data is viewable via the large, 10.1”, TFT-LCD display. The screen has a resolution of 1024x600px. It is also equipped with a 256-level intensity grading display function and a colour temperature display mode.
Finally, the Siglent SDS5004X Digital Storage Oscilloscopes are able to support USB Host, USB Device, Pass/Fail, Trigger Out, 10MHz in, 10MHz out, and VGA output interfaces in addition to the aforementioned LAN interface.
The Siglent SDS5004X Digital Storage Oscilloscopes are simple-to-use, innovative and versatile four-channel scope meters.
Siglent SDS5004X Digital Storage Oscilloscopes Key Features
- Easy-to-use, four-channel oscilloscopes equipped with an eclectic array of measurement, maths and data analysis modes and functions
- OPTIONAL 16 digital channels (max sampling rate: 1.25 GSa/s, max record length: 62.5 Mpts)
- OPTIONAL 25MHz function/ arbitrary waveform generator with built-in multiple predefined waveforms
- Max real-time sampling rate: 5GSa/s
- Max record length: 250 Mpts/ch
- SPO technology
- Max waveform capture rate in Normal mode: 110 000 wfm/s
- Max waveform capture rate in Sequence mode: 500 000 wfm/s
- Sequence mode: splits the maximum record length into multiple segments (up to 100 000 segments) according to user-defined trigger conditions
- The dead time between segments is small to ensure qualifying events are captured
- History function: extended waveforms (up to 100 000 frames) can be captured, saved and analysed
- Search and Navigate functions: allow extended waveforms to be captured, saved and analysed
- Counter function
- Bode plot function
- Digital Voltmeter function
- Voltage range: 0.5mV/div to 10V/div
- Low background noise
- Maths function: 2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential and square root
- Maths function is able to support the formula editor
- Supports high-speed, hardware-based Mask Test function with a mask editor tool
- Supports power analysis high-speed, hardware-based Average, ERES (Enhanced Resolution) functions
- Automatic Measurement function: takes automatic measurements for in excess of fifty parameters
- Automatic Measurement function supports histogram, trend, gating measurements, maths measurements, history measurements and ref measurements
- Innovative trigger system with high sensitivity and low jitter
- Supports a variety of trigger modes: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Video (HDTV supported) and Serial Bus Triggering
- Serial Bus Triggering supports decoding protocols: I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD1553B
- Ten user-friendly, one-button shortcuts for commonly used functions
- Capacitive touchscreens support multi-touch gestures
- Supports an external mouse and keyboard
- Integrated web server for remote operation via the LAN port and a web browser
- Supports SCPI remote control commands
- Large, 10.1”, TFT-LCD display
- Resolution: 1024x600px
- 256-level intensity grading display mode
- Colour temperature display mode
- Multiple interfaces: LAN (VXI-11, telnet, socket, web), USB Host, USB Device (USBTMC), Pass/Fail, Trigger Out, 10MHz in, 10MHz out, and VGA output
- Simple-to-use, innovative and versatile four-channel scope meters
What’s Included?
- Your Choice of Siglent SDS5004X Digital Storage Oscilloscope – 4 Channels
- 2/4x Corresponding Probes (see table above)
- Guarantee Card from Siglent
- USB Cable
- Quick Start Guide
- Tolsen 7 Piece Insulated Precision Screwdriver Set - TS-9900006, typically £9.99
Siglent SDS5002X Digital Storage Oscilloscopes Technical Specifications
Specifications | SDS5034X | SDS5054X | SDS5104X |
Bandwidth | 350 MHz | 500 MHz | 1GHz |
Sample rate (Max.) | 5 GSa/s (interleaving mode)*, 2.5 GSa/s (non-interleaving mode**) | ||
Analog channels | 4+EXT | ||
Memory depth (Max.) | 250 Mpts/ch (interleaving mode), 125 Mpts/ch (non-interleaving mode) | ||
Waveform capture rate (Max.) |
110,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode) | ||
Trigger type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified | ||
Serial trigger and decode | I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B | ||
Digital channel (optional) | 16-channel; maximum waveform capture rate up to 1.25 GSa/s; record length up to 62.5 Mpts | ||
Waveform generator (optional) | Single channel, frequency up to 25 MHz, 125 MSa/s sample rate, 16 kpts waveform memory | ||
I/O | USB Host, USB Device, LAN, Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA Output | ||
Probe (standard) | 1 probe supplied for each channel | ||
Display | 10.1” TFT-LCD with capacitive touch screen (1024x600) | ||
Notes | Interleaving mode: only one of CH1/CH2 and/or only one of CH3/CH4 activated | ||
Non-interleaving mode: both CH1/CH2 or both CH3/CH4 activated |
Reviews
SKU | SDS5004X |
---|