Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope

The Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope has a maximum bandwidth of 100MHz, a maximum sample rate of 1GSa/s, and a maximum record length of 14Mpts. This waveform generator is equipped with a new generation of SPO (Super-Phosphor Oscilloscope) technology which encompasses a digital trigger system with high sensitivity and low jitter, 256-Level Intensity Grading mode, Temperature Display mode, and facilitates a waveform capture rate of up 100 000 wfm/s in Normal mode and 400 000 wfm/s in Sequence mode. The Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope’s Sequence mode divides the maximum record length into segments of up to 80 000 frames, depending on the user-configured trigger conditions, in order to capture qualifying events.

In addition to this, the Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope has a Security Erase mode, as well as multiple triggering modes, including Video (supports HDTV) Edge, Slope, Pulse, Width, Window, Runt, Interval, Time Out (Dropout), Pattern, and Serial Bus triggering and decoding (supports IIC, SPI, UART, CAN and LIN). Sequential triggering and History Waveform Recording (max 80 000 frames) enable prolonged waveform logging and analysis. The Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope also features Automatic Measurement (for 38 parameters), PASS/FAIL, Measurement Statistics, Zoom, Gating, History, and Reference functions. Moreover, it is equipped with Maths functions such as Addition, Subtraction, Multiplication, Division, Integration, Differential, Square Root, and 128k pts FFT with Peaks and Markers which delivers high-frequency resolution when observing signal spectra.

Operators can quickly access commonly used functions via ten one-button shortcuts (Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom, and Print); they can also program the Preset Key to deliver user-specified or factory-default settings. Additionally, the Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope’s digital interface supports search and navigate, adding to its ease of use. Furthermore, a hardware co-processor provides measurements quickly and accurately without slowing acquisition or front-panel response. Users can view data via the large, 7” TFT display with an 800 x 480px resolution.

Finally, the Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope supports multiple languages, multiple interfaces (USB Host, USB Device, LAN, Pass/ Fail, and Trigger Out), SCPI remote control commands, and VXI-11+SCPI, Telnet (Port 5024) + SCPI, and Socket (Port 5025)+ SCPI programming over LAN.  

The Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope is a high-performance, versatile, and easy-to-use super phosphor oscilloscope.

Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope Key Features

• Four-channel, super phosphor oscilloscope
• Maximum bandwidth: 100MHz
• Maximum sample rate: 1GSa/s
• Maximum record length: 14Mpts
• New generation SPO technology
• Digital trigger system with high sensitivity and low jitter
• 256-level intensity grading mode
• Temperature display mode
• Normal mode: waveform capture rate of up to 100 000 wfm/s
• Sequence mode: waveform capture of up to 400 000 wfm/s
• Sequence mode: divides the maximum record length into 80 000-frame segments to capture qualifying events
• Security Erase mode
• Intelligent trigger modes: Edge, Slope, Pulse Width, Window, Runt, Interval, Time Out (Dropout), and Pattern
• Serial Bus triggering and decoding: IIC, SPI, UART, CAN and LIN
• Sequential triggering
• History Waveform Recording (max 80 000 frames)
• Automatic Measurement function (for 38 parameters)
• PASS/ FAIL function
• Zoom function
• Gating function
• History function
• Reference function
• Measurement Statistics
• Maths functions: Addition, Subtraction, Multiplication, Division, Integration, Differential, Square Root, and 128k pts FFT with Peaks and Markers
• Ten one-button shortcuts: Auto Setup, Default, Cursors, Measure, Roll, History, Display/ Persist, Clear Sweep, Zoom, and Print
• Programmable Preset Key
• Digital interface
• Search and navigate
• Hardware co-processor provides fast and accurate measurements without slowing acquisition or front-panel response
• Large, 7” TFT display with 800 x 480px resolution
• Multiple languages
• Multiple interfaces: USB Host, USB Device (USB – TMC), LAN, Pass/ Fail, and Trigger Out
• Supports SCPI remote control commands
• VXI-11+SCPI, Telnet (Port 5024) + SCPI, and Socket (Port 5025)+ SCPI programming over LAN
• High-performance, versatile, and easy-to-use super phosphor oscilloscope

What’s Included?

• Siglent SDS1104X-U 100MHz Four-Channel Oscilloscope
• 4x 100MHz Probes
• 1x Guarantee Card
• 1x Power Cord
• 1x USB Cable
• 1x Quick Start Guide