Reward Points
:
259
£310.80
£259.00
Home
Electrical, EV & Electronic
Oscilloscopes & Function / Waveform Instruments
Bench Oscilloscopes
Siglent SDS1052DL+ Dual-Channel Digital Oscilloscope (50MHz Bandwidth)
The Siglent SDS1052DL+ is a a dual-channel oscilloscope suitable for use in a wide variety of basic applications, Siglent's SDS1052DL+ has a large size, full colour TFT-LCD screen with resolution of 800 x 480 pixels, making it easy to visualise and analyse different waveforms.
Here's the most important parameters you need to know about the Siglent SDS1052DL+:
- Bandwidth - 50MHz
- Sampling Rate (Max) - 500MSa/s
- Channels: 2 + EXT
- Memory Depth (Max) - 32Kpts
- Trigger Types - Edge, Pulse, Video, Slope and Alternate
- I/O - USB Host, USB Device, LAN, Pass/Fail
- Probe - 2 x PB470 Passive Probes
- Display - 7" TFT LCD (800 x 480)
The SDS1052DL+ is packed full of features. This oscilloscope offers support voltage, time and delay measurement types with a total 32 different parameters which can be selected by the user. You can choose between five different measurements, all of which will be displayed on the screen simultaneously for fully comprehensive analysis.
On top of that, the SDS1052DL+ has several other features such as the ability to zoom into partial waveform segments for further analysis, PASS/FAIL function which compared current measure traces to template mask traces (ideal for signal monitoring and automated production line testing) and a Math function with 5 different options: +, -, *, / and FFT.
Using the built-in digital recorder, you'll be able to record data in real-time without any dead time whatsoever with full support for USB disk. You can easily recall stored data for observation and analysis as and when needed.
If you're having any problems using the oscilloscope, the embedded online help function can be used for handy hints on how to use every function available.
Siglent SDS1052DL+ Oscilloscope Key Features
- Dual-channel, easy-to-use, entry-level oscilloscope
- Bandwidth of 50MHz
- Sampling rate of 500MSa/s
- Channels: 2 + EXT channel
- Maximum memory depth up to 32Kpts
- Selectable trigger types: Edge, Pulse, Video, Slope and Alternate
- 7 inch, full colour TFT LCD screen with resolution of 800 x 480 pixels
- Long memory mode - set a higher sampling rate to capture more of the signal and quickly zoom to focus on the area of interest
- Zoom function - extend a partial segment of the waveform, giving a more detailed view
- PASS/FAIL function with easy-to-generate test templates - compare the current measured trace to the template mask trace
- MATH functions - includes +, -, *, / and FFT with support for channel waveform and FFT waveform in either split display windows or both signals appearing on full screen
- Digital recorder is able to record data in real-time without any dead time
- Multi-language display
- Embedded online help
- USB Host, USB Device (USBTMC), LAN (VXI-11) and PASS/FAIL interfaces
What's Included?
- Siglent SDS1052DL+ Oscilloscope
- USB Cable
- Quick Start Guide
- Certificate of Calibration
- 2 x Passive Probes
- Quality Certificate
- Power Cord
- CD (with User Manual and EasyScope X Software)
Siglent SDS1052DL+ Technical Specifications
| Acquisition System | |
| Real-Time Sampling Rate | 500MSa/s |
| Memory Depth | 32Kpts |
| Acquire Mode | Normal, Peak Detect, Average |
| Average | Averages: 4, 16, 32, 64, 128, 256 |
| Waveform Interpolation | Sinx, X |
| Input | |
| Channels | 2 |
| Coupling | DC, AC, GND |
| Impedance | DC: (1MΩ+2%) || 18pF ±3pF 50Ω: 50Ω±2 |
| Max Input Voltage | 400V, 1MΩ |
| Channel Isolation | >100:1 |
| Probe Attenuator | 1X, 10X, 50X, 100X, 500X, 1000X |
| Horizontal System | |
| Timebase Scale | 150MHz: 2.5ns/div to 50s/div 100MHz: 2.5ns/div to 50s/div 70MHz: 5.0ns/div to 50s/div 50MHz: 5.0ns/div to 50s/div |
| Channel Skew | <500ps |
| Display Format | Y-T, X-Y, Scan |
| Timebase Accuracy | ±50ppm |
| Scan Mode | 100ms/div to | 50s/div |
| Vertical System | |
| Bandwidth (-3dB) | 50MHz |
| Vertical Resolution | 8bit |
| Vertical Scale (Probe 1X) | 2mV/div to 10V/div (1-2-5) |
| Offset Range (Probe 1X) | 2mV to 200mV: ±1.6V; 206mV to 10V: ±40V |
| Bandwidth Limit | 20MHz ±40% |
| Bandwidth Flatness | DC - 10% (BW): ±1dB 10% to 50% (BW): ±2dB 50 to 100% (BW): +2dB/-3dB |
| Low Frequency Response (AC-3dB) | ≤10Hz (an input BNC) |
| Noise | STDEV ≤ 0.6div (≥5mV/div) STDEV ≤0.7div (2mV/div) |
| DC Gain Accuracy | ≤ ±3.0%: 5 mV/div ~10 V/div ≤±4.0%: ≤2 mV/div |
| DC Measurement Accuracy | ± [3%× (|reading|+|offset|) +1%×|offset| +0.2 div+2 mV] , ≤100 mV/div ±[3%× (|reading|+|offset|) +1%×|offset| +0.2 div+100 mV] , >100 mV/div |
| Rise Time | Typical 2.3 ns (SDS1152 CML+) Typical 3.5 ns (SDS1102 CML+) Typical 5.0 ns (SDS1072 CML+) Typical 7.0 ns (SDS1052 DL+) |
| Overshoot (500ps Pulse) | <10% |
| Trigger System | |
| Trigger Mode | Auto, Normal, Single |
| Trigger Level Range | Internal: ±6 divisions from center of screen EXT: ±1.2 V EXT/5: ±6 V |
| Hold Off Range | 100ns to 1.5s |
| Trigger Coupling | AC, DC, LF Rej, HF Rej |
| Trigger Sensitivity | 1 Divisions: DC-10 MHz 1.5 Divisions: 10 MHz - Max BW |
| Trigger Displacement | Pre-trigger: Memory depth/ (2*sampling) Delay Trigger: 260 div |
| Edge Trigger | |
| Slope | Rising, Falling, Rising and Falling |
| Source | CH1/CH2/EXT (EXT/5)/AC Line |
| Slope Trigger | |
| Slope | Rising, Falling |
| Limit Range | <, >, = |
| Source | CH1/CH2 |
| Time Range | 20ns to 20s |
| Pulse Trigger | |
| Polarity | +wid, -wid |
| Limit Range | <. >, = |
| Source | CH1/CH2 |
| Pulse Range | 20ns to 10s |
Additional specs available in attached datasheet.
People Also Bought
Reviews
Additional Information
| SKU | SDS1052DL |
|---|---|
| Manufacturer Part Code | SDS1052DL+ |
