Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supply

The Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies can provide a total power of up to 200 Watts or 300 Watts depending on the model. Siglent’s series of SDL1000X / SDL1000X-E DC Electronic Load Power Supplies consists of four models, please see the table below for further details.

Each of the Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supply models features an adjustable current rise time range (0.001 A/us to 2.5 A/us) and Over-Current, Over-Power, Over-Voltage and Over-Temperature protection modes.

The Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies are equipped with static CC, CV, CP and CR modes and the following dynamic modes:

• CC Dynamic mode: to 25kHz
• CP Dynamic mode: to 12.5kHz
• CV Dynamic mode: to 0.5Hz

Additionally, the Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies include a 4-wire SENSE compensation mode and CR-LED mode, as well as a range of factory-test functions including:

• Short-circuit
• Battery Discharge
• Voltage Threshold
• Voltage Rise/ Fall Speed

The Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies also include List and Program functions and can be operated remotely using RS-232, USB and LAN computer interfaces. These power supplies can also support an OPTIONAL GPIB module. Alternatively, these instruments can accommodate external analogue control as well as benchtop operation.

Multiple data parameters are viewable via the Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies’ 3.5” TFT-LCD displays with support for an analogue waveform trend chart function. Data is displayed to a resolution of either 0.1mV/ 0.1mA or 1mV/ 1mA depending on the model (see the table above).

The Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supplies are comprehensive and adaptable. They are suitable for testing power, LED lighting, battery/ handheld device designs, and industry, automotive and aerospace electronics. 

Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supply Key Features

• Can provide up to 200W or 300W of total power (model dependent – see table above)
• Resolution of either 0.1mV/ 0.1mA or 1mV/ 1mA (model dependent – see table above)
• Four models available (see table above)
• Adjustable current rise time: 0.001 A/us to 2.5 A/us
• Over-Current, Over-Power, Over-Voltage and Over-Temperature protection modes
• Static CC, CV, CP and CR modes
• CC Dynamic mode: to 25kHz
• CP Dynamic mode: to 12.5kHz
• CV Dynamic mode: to 0.5Hz
• 4-wire SENSE compensation mode
• CR-LED mode
• Short-circuit test function
• Battery Discharge test function
• Voltage Threshold test function
• Voltage Rise/ Fall Speed test function
• List and Program functions
• Benchtop operation
• Remote/ automatic operation via RS-232, USB and LAN computer interfaces
• Can support an OPTIONAL GPIB module
• Support for external analogue control
• 3.5” TFT-LCD display
• Support for analogue trend chart function
• Comprehensive and adaptable
• Test power, LED lighting, battery/ handheld device designs, and industry, automotive and aerospace electronics

What’s Included?

• Your Choice of Siglent SDL1000X / SDL1000X-E DC Electronic Load Power Supply
• Power Cord
• USB Cable
• Calibration Certificate from Siglent
• Quick Start Guide