Seaward Clare HAL103 AC/DC Hipot, Insulation, Ground/Earth Bond Tester

Optimise your production line safety testing with Seaward Clare's HAL103, a powerful, multifunctional hipot tester made for checking the safety of electrical and electronic items.

This is the upgraded version of Seaward's HAL102; the main difference between the two is the HAL103 also includes an earth/ground bond testing mode. It can also perform AC and DC flash/hipot tests, checks DC insulation resistance and also has an ARC detection mode.

Seaward HAL safety testers are made with speed and convenience in mind; the HAL103 includes a wide range of different tests and functionality, allowing you to perform everything from fully configurable manual testing to high volume automated testing. You can choose between three modes on the HAL103 - automatic mode will automatically cycle through tests on connected equipment, manual mode gives you full control and the PC mode allows you to control the unit remotely using a compatible PC or laptop (requires E-Base software package, sold separately).

Once you're done testing, all data is seamlessly saved into the HAL103's 6000 record non-volatile memory. Product details, the user, location, site and the date/time can all be stored, with the ability to send all data into the optional software package for further analysis once testing is completed.

There's much more to this tester too; the HAL103 includes a large-size, graphical LCD display, starts up fast and has fully isolated test outputs in compliance with EN50191.

Seaward Clare HAL103 AC/DC Hipot, Insulation & Ground/Earth Bond Tester Key Features

• Upgraded version of the Seaward HAL102
• Insulation resistance test with variable DC output voltage from 0.10kV to 6.00kV
• AC/DC dielectric strength testing with programmable voltage range from 0.10kV to 5.00kV (AC)/ 6.00kV (DC)
• Multiple channel output (5 isolated pairs of output terminals)
• Store up to 6000 test results in non-voltatile flash memory - includes space for information on product, user, location, site, date and time
• Highly accurate leakage and DCIR measurements
• Large-size, full graphical display with real-time clock
• Connects to a PC, barcode scanner and printer (requires software for use on PC - printers/barcode scanners sold separately)
• Seamlessly works with Seaward's optional Safety e-Base software for full PC control
• Automatic test code generation
• Fast startup
• Fully isolated test ouputs in compliance with EN50191
• Fully automatic and manually settable testing programmes
• 4 wire ground bond test measurements

What's Included?

• Seaward Clare HAL103 Tester
• Instruction Manual
• Power Cord
• Guard Plug
• Comms Cable
• Test Probes/Clips

Optional Accessories

The HAL103 has a wide range of optional accessories available - please see below.

• 194A922 - CCD Barcode Scanner
• Clare Safety e-Base Pro Software
• H-5009 - Class I Output Socket Box
• H-5014 - Data Cable
• Desk Test n Tag Printer
• H-5030 - Desk Test n Tag Printer Lead
• 01521/1 - Earth Test Clip
• 01520/1 - Earth Test Probe
• Y160H - Fault Simulator
• Guard Plug with Link
• H-5003 - Hipot Test Clip (Black)
• H-5003/R - Hipot Test Clip (Red)
• 03918/2 - Hipot Test Probe (Red)
• Y160 Fault Simulator 
• 483A910 - PowerSmart Module - increases single-phase load testing, current up to 50A
• Status Beacon

Seaward HAL Series Comparison Chart

There are multiple models in the Seaward HAL series. This comparison chart shows the difference between each.