Reward Points
:
279
£334.80
£279.00
PASS Solar Test Kit (Inc. Solar Clamp 1500V DC & Irradiance Meter)
PASS Solar Test Kit (Inc. Solar Clamp & Irradiance Meter)
Ideal for solar professionals and electricians inspecting, installing, or troubleshooting PV (photovoltaic/solar) equipment, the PASS Solar Test Kit includes the following:
- PASS PCM-2472 Solar Clamp Meter
- PASS PVIM-2000 Solar Irradiance Meter
- PASS MC4 Solar Panel Crimping Tool Kit
- PASS MC4 4mm Solar Adapter Test Leads (Red/Black)
- PASS Oxford Carry Case
PASS PCM-2472 Solar Clamp Meter Overview
The PASS PCM-2472 Solar Clamp Meter is an AC/DC true-RMS clamp meter for troubleshooting and measuring the electrical parameters of PV/Solar and industrial/production equipment. As such it can measure DC voltage up to 1500V and true-RMS AC current up to 1000V, as well as AC/DC current, resistance, continuity, diode, capacity, frequency, duty cycle, and temperature. In addition to this, the PCM-2472 Solar Clamp delivers high accuracy and a fast A/D converting sampling time. Data can be logged using the solar clamp meter’s Trend Capture function. Alternatively, readings may be sent to the Thermview+ App via Bluetooth. All measurements are visible via the PASS PCM-2472’s TFT colour LCD. The PASS PCM-2472 also offers a 1.4-inch jaw opening and an IP65-rated, double-moulded plastic housing.
To read more about the PASS PCM-2472 Solar Clamp Meter, please click here.
PASS PVIM-2000 Solar Irradiance Meter Overview
Designed to measure solar power, the PASS PVIM-2000 Solar Irradiance Meter offers transmission, solar radiation and light intensity measurements. It can also be used to determine optimal incident angles. Results are indicated in W/m2 or BTU/ (ft2*h) on the LCD screen. Optimised for longevity, the PASS PVIM-2000 Solar Irradiance Meter includes an Auto Power Off function that automatically powers down the instrument after fifteen minutes of inactivity.
To read more about the PASS PVIM-2000 Solar Irradiance Meter, please click here.
PASS MC4 Solar Panel Crimping Tool Kit Overview
The PASS MC4 Solar Panel Crimping Tool Kit includes a high-carbon steel crimper with a non-slip thermoplastic rubber handle; an accurate ratchet mechanism; and an auto lock and release device. It is perfect for precisely and easily crimpling 2.5/4/6mm2 wire; stripping cable, and installing additional male and female plugs. The PASS MC4 Solar Panel Crimping Tool Kit can also be used to install different sizes of solar panel PV cables.
To read more about the PASS MC4 Solar Panel Crimping Tool Kit, please click here.
What’s Included?
- PASS PCM-2472 Solar Clamp Meter
- PASS PVIM-2000 Solar Irradiance Meter
- PASS MC4 Solar Panel Crimping Tool Kit
- PASS MC4 4mm Solar Adapter Test Leads (Red/Black)
- PASS Oxford Carry Case
PASS PCM-2472 AC/DC True-RMS Clamp Meter Technical Specifications
| Function | Maximum |
| Voltage DC | 1500 V |
| Voltage AC | 1000 V |
| Current DC | 1000 A |
| Current AC | 1000 A |
| Flexible Coil Current | 3000 A |
| Resistance & Continuity | 60 MΩ |
| Capacitance | 100 mF |
| Frequency | 10 MHz |
| Inrush Current | 1000 A |
| Temperature | 1000°C/1832°F |
| Diode | Test Current <1.5mA |
| Duty Cycle | Yes |
| Interface | Bluetooth |
| V DC/AC | 1500 VDC/ 1000 VAC RMS |
| A AC/DC | 1000 ADC/AC RMS |
| Frequency, Resistance, Capacitance, Duty Cycle, Diode Test, Continuity | 1000 VDC/AC RMS |
| Temperature | 1000 VDC/AC RMS |
| Surge Protection | 8kV Peak per IEC 61010 |
| Safety Standards | |
| Safety | IEC/EN 61010-1 |
| EMC | IEC/EN 61326-1 |
| Insulation | Double |
| Overvoltage Category | CAT IV 600V, CAT III 1000V, CAT II 1500V |
| IP Rating | IP65 |
PASS PVIM-2000 Solar Irradiance Meter Technical Specifications
| Measuring range | 2000W/m²,634 BUT/(ft²*h) |
| Accuracy |
Typically within ±10W/m² 【±3 BTU (ft²*h)】 or ±5%, whichever isgreater in sunlight ; additional temperature induced error ±0.38 W/m²/°C【±0.12 BTU (ft²*h)/°C】from 25°C
|
| Display | 3¾ digits LCD with maximum reading 3999 |
| Sampling time | Approx. 0.25 second |
| Resolution | 0.1W/m²,0.1 BUT/(ft²*h) |
| Accuracy | <±3/year |
| Over-input | Display shows"OL" |
| EMC |
This instrument is EMC-compliant and has undergone compatibility tests according to EN61326 (1997) + A1 (1998) + A2 (2001).
|
Reviews
Additional Information
| SKU | PASS-SOLAR1 |
|---|---|
| Manufacturer Part Code | PASS-SOLAR1 |
