Norbar Slimline Production ‘P’ Type Dual scale Torque Wrench

Please note image shows NOR-1089 models vary slightly depending on model ordered 

This range off slimline torque wrenches form Nobar consists of the following models:

11089, 11085, 11086, 11090, 11088, please select your required model from the dropdown above, see the table below for specifications

Norbar’s Slimline Production ‘P’ Type Dual Scale Torque Wrenches are designed to discourage unauthorised alteration and therefore have no set scale and must be set using a torque testing device. (Available from Norbar’s Professional Torque Tester range).

The 11089 – SL0 with a fixed head is one of the smallest in the range which operates between with a range of 1 - 20 N·m (40 - 180 lbf·in) and features a push through square for left and right handed torque tightening.

Also available within the range are, both 16mm spigot and 9 x 12mm female torque handle versions

Norbar's Production ‘P’ type wrenches all feature a 72 tooth ratchet allowing ease of use in even confined spaces and the moulded grip provides grip and comfort.  When the set torque is reached a clear signal will indicate the user to stop.

Wrenches are accurate to ±3 % meeting ISO6789-1:2017 and exceeds the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

Norbar Slimline Production P-Type Torque Wrench Key Features

• Accuracy of ±3 %
• Unmistakable indication when set torque is reached
• 72 tooth ratchet
• Comfort grip accommodates strong, high-quality body for comfort and durability
•  Fixed head features push through square for both right and left-handed users
• Meets ISO6789-1:2017
• Slime line makes them easier to use in more difficult situations
• Smaller torque ranges
• Dual scale both N.m and lbf.in

What’s Included?

• Declaration od conformance
• Chosen Norbar Slimline Production P-Type Torque Wrench