Monument PV-A/F General Wire Spring CE 110/240V Power Vee Drain Cleaner - HE1 and/or HE2 Cables

Clearing clogged sink, tub and laundry drains is easier with the Monument PV-A/F General Wire Spring CE 110/240V Power Vee Drain Cleaner with automatic feed. General have miniaturized their big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you haven’t seen before in a hand-held power drain cleaner.

It's a real labor-saver in tight or awkward places. It's like having an extra hand. To feed the cable just start the Monument PV-A/F Power Vee Drain Cleaner and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. The feed handles 1/4", 5/16" and 3/8" cables. No adjustment, disassembly, or additional parts required.

Quick Change Cable Cartridges make it easy to switch to different diameter drain cables. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The machine holds 50 ft. of 1/4" or 5/16", or 35 ft. of 3/8" Flexicore cables.

The Monument PV-A/F Power Vee Drain Cleaner also comes with the new Band-It splashguard to minimize excess water spray from the spinning drum.

Our Dyna-Thrust bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Monument PV-A/F Power Vee Drain Cleaner's durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore – with an integral wire rope center. Nobody makes cables like General.

Product Features

• For sinks, tubs and laundry drains
• Power cable feed drives and retracts cables at up to 16 feet per minute
• Feed handles 1/4", 5/16" and 3/8" cables. No adjustment or parts required
• Quick-change cartridge makes switching cables clean and easy
• Unique Dyna-Thrust bearing system for longer tool life
• Band-It splashguard minimizes excess water spray from the spinning drum
• Holds 50 ft. of 1/4" or 5/16", or 35 ft. of 3/8" Flexicore cable
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility

Cartridge Refill

To switch to a different diameter cable (or even connect two 3/8" cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them.

Flexicore Cable

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequaled strength and the right amount of flexibility. It's so tough, it has a one-year warranty against defect or breakage.

Product Options

PV-A-110V: 110V with:

• 25HE1: Flexicore Cable, 1/4" x 25 ft. with EL Basin Head
• 25HE2: Flexicore Cable, 3/8" x 25 ft. with Female Connector

PV-A-240V: 240V with:

• 25HE1: Flexicore Cable, 1/4" x 25 ft. with EL Basin Head
• 25HE2: Flexicore Cable, 3/8" x 25 ft. with Female Connector

PV-F-110V: 110V with:

• 25HE1: Flexicore Cable, 1/4" x 25 ft. with EL Basin Head

PV-F-240V: 240V with:

• 25HE1: Flexicore Cable, 1/4" x 25 ft. with EL Basin Head