Mitutoyo Series 552 Absolute Digital Coolant Proof Carbon Fibre Caliper: 0-2,000mm / 0-80"

SERIES 552 - ABSOLUTE Digimatic Coolant Proof Carbon Fibre Caliper

• Interchangeable measuring jaws are available as optional accessories.
• Data output function allows integration into statistical process control and measurement systems.
• A lightweight Digimatic caliper that uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws.

Technical Data

• Scale type: ABSOLUTE electromagnetic induction linear encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 5,000 hours in continuous use
• Dust/water protection level: IP66*²

• *² Care should be taken to dry the tool after use.

Functions

ABSOLUTE System Measurement

After power is turned ON, measurement can be started without zero-setting if origin-setting was previously performed. The ABS (Absolute) origin position can be changed by the ORIGIN button.

Zero-setting (INC measurement mode)

Displayed value can be set to zero at any arbitrary position of the slider for comparative measurements.

Auto ON/OFF

The reading on the LCD disappears after this instrument is idle for a short time, but the origin point is retained. Moving the slider causes the reading on the LCD to reappear.

Data Output

Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system.

Data Hold

By using the data hold button the displayed value can be held.

Presetting (ABS INC measurement mode)

Displayed value can be set to any arbitrary value.

Offsetting

Automatically adds the thickness of the inside jaws to the measured value so that the result can be read directly, without calculation.

Inch/mm Selection

Switches the units of measurement (at any time).

Alerts

In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. If the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced. If contamination on the surface of the scale causes a calculation error, an error message is displayed and measurement stops.