or Call 01642 931 329 to discuss alternatives
SERIES 500 Super Caliper-Solar Powered
- No battery or origin reset is needed for IP67 Digital Caliper
- With no annoying origin restoration necessary, a measurement can be started at any time and without restrictions on operating speed
- Eco-friendly solar-powered Super Caliper requires no battery
- The impact resistance of the display unit has been increased for improved usability in workshop conditions
- IP67 protection ensures waterproof reliability
- This Super Caliper uses components that do not contain harmful substances and is compatible with RoHS Directives
- Supplied in a fitted plastic case
About the Charge Function (Super Caliper)
The minimum illumination required in the uncharged state is 60 lux. As shown in the table, JIS Z 9110 Artificial Illumination Intensity Standard, this Super Caliper can be used without problems in a normal work environment.
The charge function allows the operator to use this Super Caliper without interrupting work even if the ambient illumination is temporarily insufficient.
In the fully charged state, this Super Caliper can operate for approximately an hour in an environment of 50lux illumination (less than the minimum necessary illumination intensity).
The time necessary for a full charge differs, depending on the charging conditions. If this Super Caliper is left unused in an illumination of 500 lux (usual for manufacturing environments), it takes approximately one hour to reach full charge.
Inch/Metric | |||
---|---|---|---|
SKU | Range | Accuracy | Resolution |
MIT-500-786 | 0 - 6" / 0 - 150mm | ±.001” | .0005” / 0.01mm |
MIT-500-784* | |||
MIT-500-787 | 0 - 8" / 0 - 200mm | ||
MIT-500-785* |
*Without SPC data output
This winter when you buy over £100 worth of Mitutoyo products online you’ll receive either a free Mitutoyo Engineers’ Reference Book or a Metrology Handbook depending on the value of your item(s). Available for a limited time or while stocks last, this offer is perfect for metrology professionals and engineers requiring a reference guide complete with conversions, measurement principles, standards, and practices. For further details visit the Mitutoyo Online Offer Free Book Page
Accuracy | Refer to the list of specifications | |
---|---|---|
Resolution | .0005"/0.01mm or 0.01mm | |
Repeatability | .0005” / 0.01mm | |
Display | LCD | |
Length Standard | ABSOLUTE electromagnetic induction linear encoder | |
Max. Response Speed | Unlimited | |
Battery | Solar cell* | |
Dust/Water Protection Level | IP67 | |
Function | Origin-Set | Inch/mm conversion (on inch/metric models only) |
Alarm | Counting value composition error | |
IP67 Protection Level | Level 6 | Dust-tight, no ingress of dust |
Level 7 | Protected against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed 1 meter in water under standardized conditions of pressure and time (30 min.) |
*Can be used continuously above 60 lux ambient illumination.
Reviews
SKU | 500-78X |
---|