Reward Points
:
585
£702.00
£585.00
Free UK Delivery*
Mitutoyo 543-351B ABSOLUTE Digimatic Signal Output Indicator ID-C - .5" / 12.7 mm
Description
SERIES 543 - ABSOLUTE Digimatic Signal Output Indicator ID-C
- Provided with a 4 m cable.
- External power 5-24VDC required.
- A peak-detection function is equipped for measuring and judging peak values such as runout.
- The ABSOLUTE sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.
- Enables a tolerance judgement to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts.
- Output is enabled by directly connecting to external devices (sequencers etc., for which a logical invert is available if required). The measurement and judgement results are displayed on the LCD. The judgement result is also indicated by two LEDs.
Technical Data
- Measuring force: 2.5 N or less
- Display: 6-digit LCD and sign
- Scale type: ABSOLUTE electrostatic linear encoder
- Stem diameter: 8 mm
- Standard contact point: 901312
- Dust/water protection level: IP54
Functions
- Signal Output (-NG/OK/+NG, N-ch open drain, logical invert is available)
- Remote Control (Peak start preset/zero-set)
- Peak Detection (max./min.)
- Zero Setting (INC system)
- Presetting (ABS)
- Direction Switching
- Tolerance Judgement (3 pairs of ABS, INC memory function)
- Resolution Switching
- Calculation f(x) = Ax, Key Lock
- Calibration Mode (Signal output in Digimatic code format)
- Error Alarm Display
Offers
Free Mitutoyo Book with Online Mitutoyo Orders Over £100
This winter when you buy over £100 worth of Mitutoyo products online you’ll receive either a free Mitutoyo Engineers’ Reference Book or a Metrology Handbook depending on the value of your item(s). Available for a limited time or while stocks last, this offer is perfect for metrology professionals and engineers requiring a reference guide complete with conversions, measurement principles, standards, and practices. For further details visit the Mitutoyo Online Offer Free Book Page
Tech Specs
Dimensions
Inch/Metric
| SKU | Range | Resolution (selectable) | Max. permissible error | ||
|---|---|---|---|---|---|
| MPEE*¹ | Hysteresis MPEH | Repeatability MPER | |||
| MIT-543-351B | .5" / 12.7 mm | .00005" .0001", .005" / 0.001, 0.01 mm | ±.0001" / 0.003 mm | .0001" / 0.002 mm | |
*¹Error of indication for the total measuring range.
Note 1: LCD readout does not rotate.
Note 2: MAX/MIN holding: sample rate is 100 readings/s; max. rate of change of reading is 100 µm/s or less.
Output Pattern
| Wire | - NG | OK | + NG | Composition Error |
|---|---|---|---|---|
| Orange (- NG) | Low | High | High | High |
| Green (OK) | High | Low | High | High |
| Brown (+ NG) | High | High | Low | High |
| LCD | ◄ | Ο | ► | "x.xxE" indication |
I/O Specifications
| Wire | Signal | I/O | Description |
|---|---|---|---|
| Black | - V (GND) | — | Connected to minus (-) terminal |
| Red | + V | I | Power supply (5-24VDC) |
| Orange | -NG | O | Tolerance judgement result output: Only the terminal corresponding to a judgement result is set to the low level. |
| Green | OK | O | |
| Brown | + NG | O | |
| Yellow | PRESET_RECALL ZERO | I | External input terminal: If the relevant terminal is set to the low level, its signal becomes true. |
| Blue | PEAK_START | I | |
| Shield | FG | — | Connected to GND (earth) |
Note: Measurement data cannot be output.
| Digital/Analog | Digital |
|---|---|
| Measuring force MPL | ≤2.5 N |
| Protection | IP54 |
| Type | EN ISO Standard |
| Scale | Electrostatic capacitance type absolute linear encoder |
| Display | LCD, character height 8 mm |
| Max. Response Speed | Unlimited |
| Measurement Frequency (MAX/MIN/RANGE) | Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement) |
| Alarm | Low voltage, ABS composition error, overflow error, setting error |
| Stem Ø | 8 mm |
| Contact Point | Carbide ball, thread: M2.5x0.45 |
| Power Supply | 5 - 24 V DC / 100mA (max) |
| PRESET 3x | Yes |
| ON/OFF | Yes |
| Analog Bar Resolution Switchable | Yes |
| Function Lock | Yes |
| GO/±NG Judgement | Yes |
| Signal output: (+NG, OK, -NG) | Yes |
| Signal input: No-voltage input (PRESET_RECALL/ZERO, HOLD_RESET) | Yes |
| ABS / INC (INC ZERO) | Yes |
| GO/±NG Judgement via LED | Yes |
| Calculation Function (with formula) | Yes |
| Counting Direction Switchable | Yes |
| Inch/Metric Switchable | Yes |
Accessories
Accessories related to this product:
Reviews
Additional Information
| SKU | MIT-543-351B |
|---|---|
| Manufacturer Part Code | 543-351B-10 |
