Metrel MI 3109 EurotestPV Lite Photovoltaic & Electrical Installation Tester

Metrel MI 3109 EurotestPV Lite Photovoltaic & Electrical Installation Tester

The Metrel MI 3109 EurotestPV Lite Photovoltaic & Electrical Installation Tester is a PV tester suitable for carrying out checks on photovoltaic installations. It features all the tests required by EN 62449, as well as I-U characteristics measurements, calculation of STC values and power measurements on both an Inverter’s AC and DC sides (single-phase only).

Measurement Capabilities

Measurements on DC side of PV installation

• Insulation resistance
• Continuity of PE conductors
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current)
• I - U curve of PV modules and strings
• Voltage, current and power of strings and inverters
• Irradiance
• Module temperature

Measurements on AC side of PV installation

• Voltage, current, power
• Efficiency of PV module, inverter, PV system calculation

Autotest

The Autotest function makes it easy to perform a complete set of tests according to EN 62446 on PV modules and strings at the touch of a button. The Autotest function supports:

• Insulation resistance between positive output and earth
• Insulation resistance between negative output and earth
• Open circuit voltage
• Short circuit current

Additionally, the Metrel MI 3109 includes STC (Standard Test Condition) value calculation, allowing you to compare measurements even if they were taken under different conditions. It also measures two voltage and current channels to provide efficiency calculations for both AC and DC parameters simultaneously. An optional PV remote unit enables simultaneous measurement of solar irritation and the temperature of the PV module.

The MFT provides a graphical representation of the I-U curve via its LCD. Up to 1800 test results or 500 graphical results with timestamps can be saved to the internal memory. Data can be sent to Android tablets and smartphones with the EuroLink PV app installed via Bluetooth. Alternatively, results can be uploaded to a laptop or PC for analysis, review or printing using the Metrel EuroLink Pro Software.

The Metrel MI 3109 EurotestPV Lite Photovoltaic & Electrical Installation Tester is a comprehensive PV tester suitable for initial inspections of PV systems as well as subsequent maintenance, evaluation, and troubleshooting tests.

Applications

• First inspection Testing
• Periodic maintenance tests
• Evaluation and troubleshooting of photovoltaic installations
• Power and efficiency measurements (AC and DC)

Standards

Videos

Key Features

• PV tester suitable for carrying out checks on photovoltaic installations
• Features all the tests required by EN 62449
• I-U characteristics measurements
• Calculation of STC values
• Power measurements on both an inverter’s AC and DC sides (single-phase only)
• Insulation resistance (DC side)
• Continuity of PE conductors (DC side)
• Uoc (Open Circuit Voltage – DC side)
• Isc (Short Circuit Current – DC side)
• I – U curve of PV modules and strings (DC side)
• Voltage, current, and power of strings and inverters (DC side)
• Irradiance (DC side)
• Module temperature (DC side)
• Voltage (AC side)
• Current (AC side)
• Power (AC side)
• Efficiency of PV module, inverter, PV system calculation (AC side)
• Autotest function
• Use an optional PV remote unit to measure solar irritation and temperature simultaneously
• Graphical representation of the I-U curve
• LCD
• Memory: save up to 1800 test results or 500 graphical results with timestamps
• Bluetooth connectivity
• Compatible with Metrel’s EuroLink PV App
• Use Metrel EuroLink Pro PC Software to review, analyse, and/or print results
• A comprehensive PV tester
• Suitable for initial inspections of PV systems as well as maintenance, evaluation, and troubleshooting tests

What’s Included?

• Your Choice of Metrel MI 3109 EurotestPV Lite Photovoltaic & Electrical Installation Tester Set