This Entry Set kit includes the Metrel MI 3152 Multifunction Tester and the A 1532 EVSE Adaptor, please the 'What's Included?' section for full kit details.
Metrel MI 3152 Multifunction Tester
The Metrel MI 3152 EurotestXC Multifunction Tester is part of the latest generation of Metrel’s multifunctional measuring instruments. It maintains familiar features like comprehensive installation safety testing per IEC/EN 61557 standards and AUTO SEQUENCE testing for TN, TT, and IT earthing systems, all controlled via a new user interface with a large colour touch screen display.
The device provides a wide array of functions, such as online voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement, and TRMS current measurement. It also conducts RCD tests, line and loop impedance tests, earth resistance measurements, ISFL measurements, and IMD tests.
Key Features
- Predefined Automatic tests:
- Auto TT (U, Zln, Zs, Uc);
- Auto TN/RCD (U, Zln, Zs, Rpe)
- Auto TN (U, Zln, Zlpe, Rpe)
- Auto IT (U, Zln, Isc, Isfl, IMD)
- Built-in help screens for referencing on site.
- Built-in fuse tables for automatic evaluation of the line/loop impedance result.
- Monitoring of all 3 voltages in real-time.
- Automatic polarity reversal on continuity test.
- Automated RCD testing procedure.
- Built-in charger and rechargeable batteries as standard accessory.
- BT communication with PC, Android tablets and smartphones via built-in BT.
- PC SW Metrel ES Manager for creation of test structures and uploading, downloading of test results and report creation.
- Support for aMESM Android APP and data management tool (option).
- Dimensions (w x h x l): 230 x 103 x 115 mm.
- Mass (without accessories): 1.3 kg.
Metrel A 1532 EVSE Adaptor
The Metrel A 1532 EVSE Adapter is a specialized tool for testing Mode 3 electric vehicle supply equipment with a type 2 connector.
Key Features
- Banana socket outputs for connection to a 3-phase installation tester.
- Voltage indicators on EVSE output.
- Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
- Control Pilot resistance selector for simulation of electric vehicle status.
- Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
- Type 2 Male Plug connector for connection to EVSE.
- 6 mA EV RCD support.
- MESM report creation.
- Dimensions (w x h x l): 200 x 100 x 70 mm
- Mass (without accessories): 0.82 kg
What's Included?
- Metrel MI 3152 Multifunction Tester
- Metrel A1532 EVSE Adapter
- Test lead, 3 x 1.5 m
- Power supply adapter
- 6 NiMH rechargeable batteries, type AA
- Test probe, 3 pcs (blue, brown, green)
- Crocodile clip, 3 pcs (blue, brown, green)
- RS232 - PS/2 cable
- USB cable
- Soft carrying bag
- Soft carrying neck belt
- Short instruction manual
- Instruction manual on CD
- Handbook on CD
- Calibration certificate
- Small, Soft Carrying Bag for A1532
- Instruction Manual for A1532
Videos
MI 3152 Multifunction Tester Promotional
A1532 EVSE Adapter Part 1 - Overview
A1532 EVSE Adapter Part 2 - Testing Procedure
- 50M R2 Extension Wander Test Lead (PVC Cable Reel) - TSTL50M, typically £49.00
- Lockout Starter Kit - Incl. Hasps, Padlocks, Tags, MCB Lockout & More - LT-LPP, typically £25.00
- CK Tools T3943 Automatic Wire Stripper Pro - T3943, typically £36.50
- TestSafe Fibreglass Fish Tape Cable Puller – 30m - TS-FG-FT-30M, typically £24.99
- Evik 10 Piece Cable Pulling Fibreglass Rods, Standard Kit in Tube - EV-STD-KIT-T, typically £39.00
Metrel MI 3152 Multifunction Tester
Extra Features | Workspaces | El. LV Installation Safety Modes | ✔ |
---|---|---|---|
Industrial Mode | ◉ | ||
Medical Mode | ✔ | ||
EVSE Mode | ◉ | ||
IT Vehicles / Mobile Units Mode | ✔ | ||
Lightning Mode | ✔ | ||
Project Structure | ✔ | ||
Visual Inspection Mode | ✔ | ||
Functional Inspection Mode | ✔ | ||
Auto Tests | AUTO TT (U, Zln, Zs, Uc) | ✔ | |
AUTO TN/RCD (U, Zln, Zs, Rpe) | ✔ | ||
AUTO TN (U, Zln, Zlpe, Rpe) | ✔ | ||
AUTO IT (U, Zln, Isc, Isfl, IMD) | ✔ | ||
Auto Test Line/Loop Impedance TN/TT | ✔ | ||
AUTOSEQUENCES | AUTOSEQUENCE profile | ✔ | |
AUTOSEQUENCE EVSE | ◉ | ||
AUTOSEQUENCE Barcode testing | ✔ | ||
PASS/FAIL System Evaluation | ✔ | ||
On-site Parameter Settings | ✔ | ||
Automatic test sequences | Multitest sequence | ✔ | |
Advanced User Interface | Colour display | ✔ | |
Touch screen | ✔ | ||
Adaptable user interface | ✔ | ||
Graphical Help Menus | ✔ | ||
Database System Built-In | ✔ | ||
Programmable Memory Structure | ✔ | ||
Multi-level Memory Organiser | ✔ | ||
SDK support | Upload structure | ✔ | |
Upload measurements | ✔ | ||
Download | ✔ | ||
Main Features | |||
Voltage AC | Frequency | ✔ | |
Voltage TRMS | ✔ | ||
Three Phase | 3-Phase system (Phase SEQUENCE) | ✔ | |
Differential leakage current | ◉ | ||
Earth Bond / Continuity | PE lead resistance 200 mA 3-wire | ✔ | |
Ring Test 200 mA (UK installations) | ✔ | ||
Ring Auto 200 mA (UK installations) | ◉ | ||
Max Test Current 7 mA 2-wire | ✔ | ||
Max Test Current 200 mA 2-wire | ✔ | ||
Automatic polarity reversal | ✔ | ||
Insulation Resistance | Test Voltage 50 V | ✔ | |
Test Voltage 100 V | ✔ | ||
Test Voltage 250 V | ✔ | ||
Test Voltage 500 V | ✔ | ||
Test Voltage 1000 V | ✔ | ||
Test of IMD | ✔ | ||
Test of ELM | ✔ | ||
DC Ramp Voltage Test/Varistor test | ✔ | ||
Automatic Discharge | ✔ | ||
Leakage Current | Differential Leakage | ◉ | |
Leakage Current (with optional Clamp) | ◉ | ||
ISFL: L1, L2 (First Fault Leakage) | ✔ | ||
AC Insulation Leakage | ✔ | ||
Z Line / Loop Impedance | Zline L-L, L-N Ipsc - 3 Wire | ✔ | |
Zline L-L, L-N Ipsc - 2 Wire | ✔ | ||
Zloop L-PE, Ipfc - 3 Wire | ✔ | ||
Zloop L-PE, Ipfc - 2 Wire | ✔ | ||
Zs (rcd) - 3 Wire | ✔ | ||
Zref, ΔU% | ✔ | ||
Fuse Tables | ✔ | ||
Max. Ipfc = 20kA | ✔ | ||
RCD | RCD type AC | ✔ | |
RCD type A | ✔ | ||
RCD type F | ✔ | ||
RCD type B | ✔ | ||
RCD type B+ | ✔ | ||
RCD Uc | ✔ | ||
RCD (t) | ✔ | ||
10 mA | ✔ | ||
30 mA | ✔ | ||
100 mA | ✔ | ||
300 mA | ✔ | ||
500 mA | ✔ | ||
1000 mA | ✔ | ||
RCD I Ramp | ✔ | ||
RCD Auto | ✔ | ||
RCD 3-Phase | ✔ | ||
EV-RCD | ✔ | ||
MI-RCD | ✔ | ||
RCD-S (Selective) | ✔ | ||
PRCD | PRCD-S, PRCD-K | ✔ | |
Earth (Electric) Leakage Relay | ◉ | ||
Earth/Ground Resistance | Earth Resistance 2-wire | ✔ | |
Earth Resistance 3-wire | ✔ | ||
Wenner 4-wire Specific Earth Resistance | ◉ | ||
Two Iron Clamps Earth Resistance | ◉ | ||
Functional test and troubleshooting | Load test | ✔ | |
Power Measurements | Active power | ✔ | |
Reactive power | ✔ | ||
Apparent power | ✔ | ||
Power factor | ✔ | ||
Harmonics Analysis | THD current | ✔ | |
THD voltage | ✔ | ||
Current harmonics | ✔ | ||
Voltage harmonics | ✔ | ||
EVSE measurements | Monitoring of voltage | ◉ | |
Monitoring of current | ◉ | ||
Simulation of external load | ◉ | ||
Additional Features | Cable location | Cable location | ◉ |
Hand-Held | Hand-Held | ✔ | |
Security | User Accounts | ✔ | |
PASS / FAIL Indicators | PASS/FAIL Indicators | ✔ | |
Voltage Monitoring | Voltage Monitoring | ✔ | |
Display | LCD | ✔ | |
Back Light | ✔ | ||
Keyboard | QWERTY Keyboard | ✔ | |
Virtual Keyboard | ✔ | ||
Power Supply | Rechargeable Batteries in standard delivery | ✔ | |
Battery Powered | ✔ | ||
Power Supply 115 V (50-60Hz) | ✔ | ||
Power Supply 230 V (50-60Hz) | ✔ | ||
Mains Supply / PE Check | ✔ | ||
Test Lead Compensation | Test Lead Compensation | ✔ | |
Buzzer | Buzzer | ✔ | |
Graphical user interface | Graphical Online Help | ✔ | |
Communication Port | Communication Port USB | ✔ | |
Communication Port RS232 - PS/2 | ✔ | ||
Built-in Bluetooth | Built-in Bluetooth | ✔ | |
Mobile Application | Android Application | ✔ | |
Printing / Scanning | QR-Code Printing / Scanning | ◉ | |
Memory | Internal memory | ✔ | |
microSD memory card | ✔ | ||
Downloadable | ✔ | ||
Uploadable | ✔ | ||
IP protection | IP 40 | ✔ | |
Protection category | CAT IV 300 V | ✔ | |
CAT III 600 V | ✔ | ||
Special Accessories | EVSE adapter | A 1832 Mode 3 Charging cable adapter | ✔ |
Passive 3-Phase Adapter | Passive 3-Phase Adapter | ◉ | |
Active Impedance Adapter | Active Impedance Adapter | ◉ | |
Adapter for specific resistance ρ | ρ adapter | ◉ | |
Active Euro Checkbox | Active Euro Checkbox | ◉ | |
Active Ring Adapter EASYswitch | Active Ring Adapter EASYswitch (UK only) | ◉ | |
Cable Locator | Cable Locator | ◉ | |
Tip Commander | Tip Commander | ◉ | |
Plug Commander | Plug Commander | ✔ | |
Current clamps | DC - Current Clamp | ◉ | |
Generator Current Clamp | ◉ | ||
AC Leakage Current Clamp | ◉ | ||
Lux Sensor | Lux Sensor | ◉ | |
Smartphones scanner | Smartphones scanner | ◉ | |
PC Software Package | PC Software Package | ✔ | |
MESM Compatible | ✔ | ||
Report creation | ◉ | ||
Professional reporting | ◉ | ||
Battery Charger | Battery Charger | ✔ | |
Electrical Energetics | Power generation | Earthing and lightning protection in thermal energy power plants | ✔ |
Renewable energy sources | Generator stator testing | ✔ | |
Lightning protection testing in wind plants | ✔ | ||
Two-clamp method for measuring earth loops in a solar plant | ✔ | ||
Power distribution | Insulation of long cables | ✔ | |
Industrial installations | Remote antenna tower earthing resistance | ✔ | |
Specific earth resistance measurement methods | ◉ | ||
Building Facilities | Low voltage electrical installation safety | Substation electrical safety | ✔ |
Mains bonding and touch voltages during fault | ✔ | ||
Switchboards and automatic trip-out protection | ✔ | ||
Public places electrical safety | ✔ | ||
Low voltage earthing and lightning protection | Earthing measurement with fall of potential method | ✔ | |
2-clamps method for measuring lightning and earth protection | ✔ | ||
Surge protection devices | ✔ | ||
Special locations | Wet and outdoor locations | ✔ | |
IT system | ✔ | ||
DC installations | ✔ | ||
EVSE construction and testing | ✔ | ||
Transportation | e-Mobility | EVSE domestic installation testing | ◉ |
EVSE periodic inspection | ◉ | ||
Renewable power and car charging | ◉ | ||
Mobile installations | Vehicles with an on-board generator | ◉ | |
Emergency response vehicles | ✔ | ||
Telecommunication equipment in mobile installations | ✔ | ||
Medical Facilities | Hospital earthing and lightning protection | Two clamps method for measuring lightning and earth protection | ✔ |
Hospital earthing measurement with fall of potential method | ✔ | ||
Mains bonding and touch voltages during fault current | ✔ | ||
Surge protection devices in hospitals | ✔ | ||
Power supply and power distribution | Hospital switchboards and automatic trip-out protection | ✔ | |
Surgery rooms or operating theatres | Medical IT system | ✔ | |
Isolated areas RCDs | ✔ | ||
Patient recovery rooms and hospital wards | Public and workspace electrical safety in healthcare | ✔ | |
Electrical safety in hospital wet areas | ✔ | ||
Secondary power sources in healthcare | Generator safety | ✔ | |
Ambulances | ✔ | ||
Field hospital | ✔ | ||
Standards Applied | Building LV Installation | EISinsp Competences: Low Voltage Electrical Installation Safety Inspection | ✔ |
EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers | ✔ | ||
IEC/EN 60364 Electrical Installations for Buildings series | ✔ | ||
IEC/EN 60364-6 Electrical Installations for Buildings - Verification | ✔ | ||
IEC/EN 60364-4-41 Electrical Installations for Buildings - Protection against electric shock | ✔ | ||
IEC/EN 60755 General safety requirements for residual current operated protective devices | ✔ | ||
IEC/EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) | ✔ | ||
IEC/EN 61009 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) | ✔ | ||
IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series | ✔ | ||
IEC/EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements | ✔ | ||
IEC/EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance | ✔ | ||
IEC/EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance | ✔ | ||
IEC/EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems | ✔ | ||
IEC/EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence | ✔ | ||
IEC/EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring and monitoring of protective measures | ✔ | ||
VDE 0413 (IEC 61557) Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series | ✔ | ||
AS / NZ 3017 Electrical installations – Verification guidelines | ✔ | ||
AS / NZ 3018 Electrical installations - Domestic installations | ✔ | ||
BS 7671 IEE Wiring Regulations (18th edition) | ✔ | ||
CEI 64.8 V4 rated electrical equipment not exceeding 1,000 VAC and 1,500V DC | ✔ | ||
Earthing and lightning protection | LPSinsp Competences: Lightning Protection of Buildings Inspection | ✔ | |
LPSc Competences: Lightning Protection of Buildings for Contractors and Maintainers | ✔ | ||
IEC 62305 Protection against Lightning - series | ✔ | ||
IEC/EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth | ✔ | ||
IEC/EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding | ✔ | ||
Power quality | PQA Competences: Power Quality Analyzing & Reporting | ✔ | |
IEC/EN 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) | ✔ | ||
Electrical switchboards safety | ESB Competences: Electrical Switchboard Safety Testing | ✔ | |
IEC/EN 62271 High-voltage switchgear and controlgear - series | ✔ | ||
IEC/EN 62271-1 High-voltage switchgear and control gear - Part 1: Common specifications for alternating current switchgear and control gear | ✔ | ||
IEC/EN 62271-100 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers | ✔ | ||
Mobile Units Electrical Safety | eMOB Competences: Electrical LV Installations in Mobile Units Safety | ✔ | |
IEC/EN/HD 60364-7-717 Low-voltage electrical installations: Requirements for special installations or locations – Supplies for Electrical Vehicles | ✔ | ||
ISO 6469-3 - Electrically propelled road vehicles Safety specification Part 3: Electrical safety | ✔ | ||
Electrical Vehicle Supply Equipment | EVSE Competences: Electrical Vehicle Supply Equipment Safety | ◉ | |
IEC/EN 61851 Electric vehicle conductive charging system | ✔ | ||
IEC/EN 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | ✔ | ||
Medical electrical equipment | AS/NZS 3551 Management programs for medical devices | ✔ | |
Medical and surgery room installations | MEDi Competences: Medical and Surgery Rooms Electrical Installations Safety | ✔ | |
Instrument safety towards the user | Directive EMC 89/336/EE on electromagnetic compatibility | ✔ | |
IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series | ✔ | ||
IEC/EN 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage | ✔ | ||
EMC safety | IEC/EN 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements - series | ✔ | |
Key | ✔ Supported | ◉ Optional |
A 1532 EVSE Adaptor
Extra Features | Workspaces | EVSE Mode | ✔ |
---|---|---|---|
AUTOSEQUENCES | AUTOSEQUENCE EVSE | ✔ | |
Main Features | EVSE measurements | Proximity pilot 0-64 A | ✔ |
Control Pilot states settings | ✔ | ||
Line impedance for charging station | ✔ | ||
Fault loop impedance for charging station | ✔ | ||
Functional test of proximity pilot | ✔ | ||
Functional test of control pilot | ✔ | ||
Isolation test for charging station | ✔ | ||
1-phase charging station testing | ✔ | ||
1-phase test through socket | ✔ | ||
3-phase charging station testing | ✔ | ||
CP short error simulation (E state) | ✔ | ||
Additional Features | IP protection | IP 40 | ✔ |
Protection category | CAT II 300 V | ✔ | |
Building Facilities | Special locations | EVSE construction and testing | ✔ |
Transportation | e-Mobility | EVSE domestic installation testing | ✔ |
EVSE periodic inspection | ✔ | ||
Renewable power and car charging | ✔ | ||
Mobile installations | Vehicles with an on-board generator | ✔ | |
Standards Applied | Building LV Installation | EISinsp Competences: Low Voltage Electrical Installation Safety Inspection | ✔ |
EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers | ✔ | ||
IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series | ✔ | ||
Mobile Units Electrical Safety | ISO 6469-3 - Electrically propelled road vehicles Safety specification Part 3: Electrical safety | ✔ | |
Electrical Vehicle Supply Equipment | EVSE Competences: Electrical Vehicle Supply Equipment Safety | ✔ |
Reviews
SKU | EVKIT2 |
---|---|
Manufacturer Part Code | EVKIT2 |
Country of Origin | Slovenia |