Metrel A1732 DC Chargepoint (EVSE) Adapter

The Metrel A 1732 tests the functional and electrical safety of Electric Vehicle Supply Equipment in Mode 4 (DC EVSE) and Mode 3 (AC EVSE) configurations. It supports various connector types, including CCS2, CHAdeMO, and Type 2 AC plugs.

When paired with MI 3155 the adapter enables initiation of communication protocols, including ISO 15118, DIN 70121, CHAdeMO, and Low-level PWM. It can also simulate errors on the Control Pilot (CP) signal and Protective Earth (PE) connections to assess EVSE response.

When paired with the MI 3155 EurotestXD installation tester, the adapter can log the charging protocol and perform measurements and testing required for EVSE commissioning and periodic safety testing.

Key Features

• Communication with A 1732 DC EVSE Adapter via Bluetooth
• Predefined test protocol for DC EVSE in the memory structure
• All measurements can be started and viewed on MI 3155 EurotestXD
• Performing accurate 4-wire measurements with 200 mA measuring current
• Insulation resistance with DC voltage up to 2500 V
• Functional test with a live view of charge protocol and voltages and currents on the test terminals
• Remote faults triggering and reaction time measuring
• DC impedance measurement
• Discharge time measurement
• Asymmetric IMD test with a setup able fault resistance between 20 kΩ and 640 kΩ at 5 kΩ intervals
• Programmable AUTOSEQUENCES (optional) for customising the test protocol
• PC SW Metrel ES Manager for measurement pre and post-processing: preparation of the test structure, result download, tree-view, table view, graphical view, storing, and printing the reports

What's Included?

• A 1732 DC EVSE Adapter
• A 1781 Test cable, GRY/GRN/BRN, 1.5m, 0.75mm2, CAT IV
• A 1493 Power cable, 2m, 3x1.5mm2
• A 1727 USB cable TypeA/B