Reward Points
:
1080
£1,296.00
£1,080.00
Megger TDR1000/3P Single Channel Fault Locator
This portable, lightweight unit is used for quickly finding faults on metallic cabling up to 5000m in length (dependant upon velocity factor and the type of cabling).
This fault locator includes four output impedances of 25, 50, 75 and 100Ω and uses velocity factor between 0.2 and 0.99 to meet the various demands of cable testing. The TDR1000/3P also features an intuitive, easy-to-use interface with 4 way control switch for easily switching between different functions.
When carrying out TDR tracing this device speeds up testing by using its AUTO mode which automatically selects applicable parameters depending on the overall range required. It also comes with a live trace overlay which allows users to compare two traces at the same time and the devices' bright, graphical LCD screen can be used in both good and poor lighting conditions thanks to the inclusion of a bright backlight.
This cable locator uses ultra fast pulse technology to carry out near fault identification and is designed for use on metallic cable pairings. Distance can be displayed in either metres of feet depending on preference and this tester is IP54 safety rated.
Megger TDR1000/3P Single Channel Cable Fault Locator Key Features
- Easy to use with simple interface
- Backlit monochrome graphical LCD display
- Ultra fast pulse for near end fault identification
- Built in HOLD function for comparison work
- IP54 rated
- Designed for use on metallic cable pairings
- Adjustable display contrast
- Resolution to 0.1m
- Suitable for cables up to 5000m
- Can be used on telecom TNV-3 circuits or 150V CAT IV power circuits
- Doesn't require the use of power blocking filters
- Automatically selected output impedance
- Auto option
- Metre/feet display
Full List of Products Included
- Megger TDR1000/3P Single Channel Cable Fault Locator
- Hard Carry Case
- Fused Test Lead Set
- User Guide CD
Megger TDR1000/3P Technical Specifications
| Ranges | 10 m, 25 m, 100 m, 250 m, 1000 m, 2500 m, 5000 m (30 ft, 75 ft, 300 ft, 750 ft, 3000 ft, 7500 ft, 15000 ft) |
| Accuracy |
±1% of range ± pixel at 0.67 VF and is conditional on the velocity factor being correct.] |
| Resolution | 1% of range |
| Refresh Rate | Trace updates 3 times per second |
| Input Protection |
This instrument complies with IEC61010-1 for connection to live systems up to 150 V CAT IV when used with the optional fused test lead set. |
| Output Pulse | 5 volts peak to peak into open circuit. Pulse widths determined by range and cable |
| Gain | Set for each range with three user selectable steps (in Manual operating mode) |
| Velocity Factor | Variable from 0.2 to 0.99 in steps of 0.01 |
| Tx Null | Automatic |
| Power Down | Automatic after 5 minutes with no key press |
| Backlight | Stays on for 1 minute with no key press |
| Batteries | Five LR6 (AA) type batteries, Manganese alkali or nickel metal-hydride cells |
| Battery Life | Up to 14 hours (Typical) |
| Mechanical | The instrument is designed for use indoors or outdoors and is rated to IP54. |
| Case Dimensions | 230 mm (9 in) x 115 mm (4.5 inches) x 48 mm (2 inches) |
| Instrument Weight | 0.6 kg (1.32 lbs) |
| Case Material | ABS |
| Connectors | Two 4 mm-safety terminals |
| Test Leads | 0.5 metres long fitted with 500 mA FF HBC 1 kV 50 kA Fuse |
| Display | 256 x 128 pixel Graphics LCD |
| Operating Temperature | -15 ºC to +50 ºC (5 ºF to 122 ºF) |
| Storage Temperature | -20 ºC to 70 ºC (-4 ºF to 158 ºF |
| Safety |
When using the optional fused test lead set this instrument complies with IEC61010-1 for connection to live systems with less than 300 V between the terminals and up to 150 V CAT IV to earth |
| EMC |
Complies with Electromagnetic Compatibility Specifications (Light industrial) BS EN 61326-1, with a minimum performance of ‘B’ for all immunity tests |
Accessories related to this product:
Reviews
Additional Information
| SKU | 1001-789 |
|---|---|
| Manufacturer Part Code | 1001-789 |
| Country of Origin | United Kingdom |
