Home High Voltage, Utility & Rail High Voltage Testing & Diagnostics High Voltage Insulation Testers & Megohmmeters

Megger S1-1568 UK Diagnostic Insulation Tester 15kV – Choice of Model

SKU

S1-1568

Rating:

(0)

Reward Points

5802

£5,802.00 £4,835.00

1 Option in Stock

Free UK Delivery*

Megger S1-1568 UK Diagnostic Insulation Tester 15kV – Choice of Model

Description

The Megger S1-1568 UK Diagnostic Insulation Tester (15kV) is available in two models. These models differ only in that the Megger S1-1568-TC-UK Diagnostic Insulation Tester (1009-737) is supplied with a transport case whereas the Megger S1-1568 UK Diagnostic Insulation Tester (1002-892) is not supplied with a transport case.

The transport case supplied with the Megger S1-1568-TC-UK model can be used to store the diagnostic insulation tester as well as two standard test lead sets, fused test leads, and a set of screened test leads. This rugged case proves particularly useful when storing the Megger S1-1568 UK Diagnostic Insulation Tester in a vehicle and improves work efficiency by ensuring that all the equipment required is kept in the same place.

The Megger S1-1568 UK Diagnostic Insulation Testers have been optimised for testing cables, transformers, motors/ generators and bushings. They are of particular use to power utilities and service companies working in generation, transmission and distribution industry sectors.

These 15kV models are safety rated to CAT IV 1000V up to 4000m and include the following testing capabilities:

Resistance measurements: 35TΩ at 15kV
Current: 0.01na to 6mA
High current: 6mA short circuit current
Capacitance: 10nF to 50µF
Voltage: 30V to 660V AC/DC (45Hz- 65Hz)

The Megger S1-1568 UK Diagnostic Insulation Testers also feature pre-configured diagnostics tests for Polarisation Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD) and Stepped Voltage (SV), as well as Ramp Tests. They also include five pre-set voltages for use in the Insulation Test mode. Additionally, the user is able to set a lock voltage range.

The Megger S1-1568 UK Diagnostic Insulation Testers’ extensive measurement capabilities, particularly their 6mA short circuit current check, combined with their high noise immunity (8mA of noise rejection) and four software filters (10s, 30s, 100s and 200s) makes them Megger’s most advanced DC insulation resistance testers to date.

Accessing and running the Megger S1-1568 UK Diagnostic Insulation Testers’ numerous tests and checks is made simple by the inclusion of two rotary switches and a graphical quick-start guide included on the inside of the lid; this guide serves a useful reference tool for first-time users. These instruments are also equipped with an intuitive user interface again adding the ease, as well as the efficiency, of operations.

It is also possible to run automated resistance tests remotely via a USB cable. This makes the Megger S1-1568 UK Diagnostic Insulation Testers of particular use to original equipment manufacturers and repairers, as well as substation technicians wishing to perform tests at a safer, more convenient distance.

Test results are indicated on the ohmmeters' large, backlit, LCD displays. It is possible to view multiple results simultaneously via these displays. The Megger S1-1568 UK Diagnostic Insulation Testers also feature an integrated memory to which test results can be saved. It is possible to download recorded measurements to Megger's asset management software (PowerDB Pro, Lite or Advanced) via an isolated USB cable or an integrated Bluetooth® interface.

The Megger S1-1568 UK Diagnostic Insulation Tester also includes a real-time clock for date and time stamping measurements and has the capacity to store measurements with the temperature and humidity (measured independently). Saved data can be viewed on the Megger S1-1568 UK Diagnostic Insulation Testers' displays using the on-screen recall function.

The Megger S1-1568 UK Diagnostic Insulation Testers are powered using Li-on, IEC62133-compliant batteries which provide up to four and a half hours of power and take only two hours to recharge. If the user finds the Megger S1-1568 UK Diagnostic Insulation Testers' batteries have gone flat, he/she may power the instruments via an AC power source. These features all work to reduce the Megger S1-1568 UK Diagnostic Insulation Testers' downtime.

Also adding to the practicality of these instruments is their robust outer cases and fire-retardant inner cases. The Megger S1-1568 UK Diagnostic Insulation Testers are protected from dust and water ingress as well as potential damage caused by rugged environments. Their lids may be removed to facilitate easier access to test terminals; they also include a clip-on lead pouch for storing test leads.

The Megger S1-1568 UK Diagnostic Insulation Testers are sophisticated, simple-to-use and safety-optimised ohmmeters. They are ideal for technicians requiring a tool to test the insulation of equipment used within the generation, distribution and transmission industry sectors.

Megger S1-1568 UK Diagnostic Insulation Tester Key Features

Available in two models
The Megger S1-1568-TC-UK is supplied with a transport case
The Megger S1-1568 UK is NOT supplied with a transport case
The transport case can be used to store the tester as well as two standard test lead sets, fused test leads, and a set of screened test leads
The transport case ensures all equipment is kept together
The transport case is of particular use when storing the tester in a vehicle
Testers are optimised for performing insulation resistance tests on cables, transformers, motors/ generators and bushings
Of particular use to utilities and service companies working in generation, transmission and distribution industry sectors
CAT IV 1000V up to 4000m
Resistance measurements: 35TΩ at 15kV
Current: 0.01na to 6mA
High current: 6mA short circuit current
Capacitance: 10nF to 50µF
Voltage: 30V to 660V AC/DC (45Hz- 65Hz)
Polarisation Index (PI) tests
Dielectric Absorption Ratio (DAR) tests
Dielectric Discharge (DD) tests
Stepped Voltage (SV) tests
Ramp tests
Insulation Test mode features five pre-set voltages
User-settable lock voltage range
High noise immunity (8mA of noise rejection)
Four software filters (10s, 30s, 100s and 200s)
Megger’s most advanced DC insulation resistance tester
Two rotary switches
Graphical quick-start guide included on the inside of the lid
Intuitive user interface
Perform automated resistance tests remotely via a USB cable
Particularly useful for original equipment manufacturers and repairers
Ideal for substation technicians wishing to perform tests at a safer, more convenient distance
Large, backlit, LCD display
View multiple results simultaneously
Integrated memory for saving test results
Download recorded measurements to Megger’s asset management software via USB cable or Bluetooth®
Compatible with Megger PowerDB Pro, Lite or Advanced Asset Management Software
Real-time clock for date and time stamping results
Results can be saved with the temperature and humidity (measured independently)
On-screen recall function for saved data
Powered using a Li-on, IEC62133-compliant battery
Batteries provide up to 4.5 hours of power and take just two hours to recharge
Can be powered using an AC power source
Robust outer case
Fire-retardant inner case
Protected from dust and water ingress
Removable lid for accessing test terminals
Clip-on lead pouch for storing test leads
Sophisticated, simple-to-use, safety-optimised instruments
Ideal for technicians testing equipment used within the generation, distribution and transmission industry sectors

What’s Included?

Your Choice of Megger S1-1568 UK Diagnostic Insulation Tester (with or without transport case)
3m, 15kV-insulated Lead Set with Large Clips
Megger PowerDB Lite Asset Management Software

Tech Specs

Megger S1-1568 UK Diagnostic Insulation Tester (15kV) Technical Specifications

AC voltage (auto ranging)	90 - 264 V rms, 50/60 Hz, 200 A
Battery life	11.1 V, 5.2Ah meets IEC 62133: 2003 (S1-1568 has 2 batteries)
Battery life	4.5 hours (typical) continuous testing at 15 kV with a 100 MΩ load
30 min quick charge	1 hour operation at 5 kV with a 100 MΩ load
Battery charge time	2.5 hours deep discharge, 2 hours normal discharge
30 min quick charge	1 hour operation at 5 kV with a 100 MΩ load
Test voltage	250 V, 500 V, 1000 V, 2500 V, 5000 V, 10000 V, 15000 V
Lock test voltage	40 V to 1 kV in 10 V steps, 1 kV to 5 kV in 25 V steps, 5 kV to 15 kV in 25 V steps
Test voltage accuracy	+4%, -0%, ±10 V nominal test voltage at 1 GΩ load (0°C to 30°C)
Resistance range	10 k to 15 TΩ @ 5 kV, 10 k to 35 TΩ @ 10 kV, 10 k to 35 TΩ @ 15 kV
Accuracy
±5% to	3 TΩ @ 15 kV
	2 TΩ @ 10 kV
	1 TΩ @ 5000 V
	500 GΩ @ 2500 V
	200 GΩ @ 1000 V
±20% to	30 TΩ @ 15 kV
	20 TΩ @ 10 kV
	10 TΩ @ 5000 V
	5 TΩ @ 2500 V
	2 TΩ @ 1000 V
Guard terminal performance	Guards out parallel leakage resistance down to 250 kΩ with a maximum additional resistance error of 1% with a 100 MΩ load
Display range analogue	100 kΩ to 10 TΩ
Display range digital	10 kΩ to 35 TΩ
Short circuit/charge current	6 mA
Insulation test Alarm	100 kΩ to 10 GΩ
Capacitor Charge
(on battery)	< 2.5 s/μF to 5 kV , <5 s/μF to 10 kV, < 6.3 s/μF to 15 kV
with AC)	< 1.5 s/μF to 5 kV , <2.7 s/μF to 10 kV, < 4 s/μF to 15 kV
Capacitor discharge	5 kV to 50 V :< 120 ms/μF
	10 kV to 50 V:< 250 ms/μF
	15 kV to 50 V:< 3500 ms/μF
Capacitance range with test voltage set above 500V	10 nF to 50 μF
Capacitance measurement with test voltage set above 500 V	10 nF to 50μF
Capacitance measurement accuracy	10 nF to 10 μF : ±10% ±5 nF
Current range	0.01 nA to 6 mA
Current accuracy	±5% ±0.2 nA at all voltages (23 °C)
Interference	8 mA from 2800 V to 15 kV
Software 4 filter settings	10 s, 30 s, 100 s, 200 s
Voltmeter range	30 V to 660 V ac or dc, 45Hz – 65Hz
Voltmeter accuracy	±3%, ±3V
Timer range	Up to 99 minutes 59 seconds, 15 second minimum setting
Memory capacity	11 hrs logging @ 5 sec intervals
Test modes	IR, IR(t), DAR, PI, SV, DD, ramp test
Interface	USB type B (device), Bluetooth® Class 2
Real time output	(V, I, R) readings at a rate of 1 Hz
Remote control	Remote control via USB cable only (requires RC dongle to be in position)
Environmental
Maximum altitude	4000 m
Operating temperature range	-20 °C to 50 °C
Storage temperature range -	-25 °C to 65 °C
Humidity	90% RH non-condensing at 40 °C
IP rating	IP65 (lid closed), IP40 (lid open)
Safety	Meets the requirements of IEC 61010-1, CATIV 600 V to 3000 m (5 kV, 10 kV) CATIV 1000 V to 4000 m (15 kV)
EMC	Meets the requirements of IEC61326-1
Dimensions	305 mm x 194 mm x 360 mm
Weight	6,5 kg