Home Electrical, EV & Electronic Electrical Test Equipment (18th Edition) Insulation & Continuity Testers

Megger MIT420/2 Insulation Tester with Memory

SKU

1004-739

Rating:

(0)

Reward Points

548

£657.60 £548.00

In Stock

Free UK Delivery*

Megger MIT420/2 Insulation Tester with Memory

Description

Test insulation, continuity, voltage, capacitance and more, then store all the results with this insulation tester from Megger.

The upgraded version of the Megger MIT410/2, the MIT420/2's main benefit is its built-in memory storage. Whenever you're testing, all results can be stored directly on the tester with easy recall, making this tester ideal for testing over a period of time.

Featuring multiple selectable test voltages (50, 100, 250, 500 and 1000V variable), the Megger MIT420/2 is suitable for insulation testing up to a maximum of 200GΩ. It's also possible to use this tester to perform PI (polarisation index) and DAR (dielectric absorption ratio) tests.

This model is the official replacement for the original Megger MIT420. With a redesigned case with built-in backstand for hands-free use, plus new features, this product is ideal for use in both electrical and industrial inspections.

Megger MIT420/2 Insulation Tester Key Features

Selectable test voltages of 50, 100, 250, 500 and 1000V
Variable test voltage from 10V to 1000V
2% test voltage accuracy
PASS/FAIL indication
Current test voltage display
Maximum insulation measurement range of 200GΩ
Polarisation index and dielectric absorption ratio tests
Continuity testing with automatic reverse polarity
AC/DC voltage measurements to 600V
mV AC/DC range
Frequency measurements from 15 to 450Hz
Capacitance measurements from 1nF to 10μF
Combined continuity and voltage measurements
Automatic power down
Built-in memory storage with easy recall
Suitable for being powered by standard AA or NiMH rechargeable batteries
CAT IV 600V and CAT III 1000V safety rated

What's Included?

Megger MIT420/2 Insulation Tester
Red/Black Silicone Test Leads with Probes and Clips
SP5 Remote Switch Probe
6 x NiMH Rechargeable Batteries
Hard Carrying Case

Megger MIT400/2 Series Comparison Chart

There are several models available in this series - this chart outlines the difference between each.

Parameter	MIT400/2	MIT410/2	MIT420/2	MIT430/2
Insulation
50/100V	-	√	√	√
250/500/1000V	√	√	√	√
Variable	-	-	√	√
√PI-/DAR/Timed	-	√	√	√
Lock Button on MΩ	√	√	√	√
Continuity
Continuity 0.01Ω to 1MΩ	100Ω	√	√	√
Auto Reverse Polarity (setup ON-OFF)	-	√	√	√
Lead √Null (<10Ω)	√	√	√	√
Voltage
AC/DC Volts 600V	√	√	√	√
mV AC/DC Range	√	√	√	√
Frequency Measurements 15 to 400Hz	-	√	√	√
Input Impedance	0.25MΩ	0.25MΩ	0.25MΩ	0.25MΩ
Capacitance
Capacitance 0.1nF to 10μF	-	-	√	√
Other Features
PASS/FAIL on Limit Alarms	-	√	√	√
Auto Power Down (setup)	√	√	√	√
On-Board Memory	-	-	√	√
Bluetooth Download + Software	-	-	-	√
AA Alkaline or NIMH	Both	Both	Both	Both
Recharger Ready	-	-	-	√
CAT IV 600V / CAT III 1000V	√	√	√	√

Accessories

Please find below a selection of accessories available for the Megger MIT420/2 Insulation Tester with Memory. For further information, please contact our sales team.

Our SKU	Megger's Part Number	Product
1010-013	1010-013	Magnetic Hanging Strap (MIT400 Mk2 / MIT480 Mk2)
1007-781	1007-781	1kV Silicon test leads w clips/prods
MEGITA1	1002-001B	Unfused Lead Set, Red/Black (Boxed)
MEGRCDA4	1002-015B	Fused Test Lead Set Red/Black Red FF500mA 50kA (Boxed)
1002-774	1007-157B	SP5 Remote Switched Probe (Boxed)
1002-491	1002-491B	Prod & Clip Set - Insulation Testers
1007-637	1007-637	2.5 kV Silicone Test Leads + Clips x3
1000-562	1000-562	Test Lead Probe Cap [Clear] Bag of 20
5410-420	1007-169	Blow Moulded Case MIT400 Mk1 & Mk2 Series
1007-887	1007-887	Carry Pouch MIT400/2 Series

Tech Specs

Megger MIT400/2 Series Technical Specifications

Insulation Accuracy
Test Voltage
MIT 400/2	250, 500 and 1000V
MIT 410/2, 420/2 and 430/2	50, 100, 250, 500 and 1000V
Test Voltage	Range	Accuracy
50V	10GΩ	±2% ± 2 digits ± 4.0% per GΩ
100V	20GΩ	±2% ± 2 digits ± 2.0% per GΩ
250V	50GΩ	±2% ± 2 digits ± 0.8% per GΩ
500V	100GΩ	±2% ± 2 digits ± 0.4% per GΩ
1000V	200GΩ	±2% ± 2 digits ± 0.2% per GΩ
Display Range	Analogue 1GΩ full scale
Resolution
Short Circuit/Charge Current	2mA +0% to -50% to EN 61557-2 (2007)
Open Circuit Voltage Insulation	-0 +2% ±2V
Test Current	1mA at min pass value of insulation to a max of 2mA max
Leakage	10% ± 3 digits
Voltage	3% ±3 digits ±0.5% of rated voltage
Timer Control	60 second countdown timer
Note	Above specifications only apply when high quality silicone leads are being used
Continuity
Continuity Measurement	0.01Ω to 999kΩ (0 to 1000kΩ on analogue scale)
Continuity Accuracy	± 3% ± 2 digits (0 to 100 Ω ) ±5% ±2 digits (100 to 500kΩ) (500kΩ to 1MΩ unspecified) Service Error: BS EN 61557-4 (2007) - ± 2.0%, 0.1 Ω - 2 Ω ± 6.8%
Open Circuit Voltage	5V ±1V
Test Current	200mA (-0mA to +20mA) (0.01Ω to 4Ω)
Polarity	Single polarity (default) / Dual polarity (configurable on setup)
Lead Resistance	Null up to 9.00Ω
Voltage
Voltage Range	AC: 10mV to 600V RMS sinusoidal (15Hz to 400Hz) DC: 0 to 600V
Volt Range Accuracy	AC: ±2% ±1 digit DC: ±2% ±2 digit Service Error: BS EN 61557-1 (2007) - ± 2.0% ± 2d, 0 V - 300 V AC/DC ± 5.1%
Waveform	Unspecified range: 0 – 10 mV (15 to 400 Hz) For non-sinusoidal waveforms additional specifications apply Non-sinusoidal waveforms: ±3% ± 2 digits >100 mV to 600 V TRMS ±8% ± 2 digits 10 mV to 100 mV TRMS
Frequency
Frequency Measurement Range	15Hz to 400Hz
Frequency Measurement Accuracy	±0.5% ±1 digit (100Hz to 400Hz unspecified)
Capacitance Measurement (MIT420/2 and MIT430/2)
Capacitance Measurement	1nF to 10μF
Capacitance Measurement Accuracy	±5.0% ± 2 digits (0.1nF to 1nF unspecified)
Storage (MIT420/2 and MIT430/2)
Storage Capacity	>1000 test results
Data Download	Bluetooth wireless Bluetooth Class II
Range	Up to 10m
General Specs
Battery Life	3000 inuslation tests with duty cycle of 5 seconds ON/55 sec off @ 1000V into 1MΩ
Dimensions	Instrument: 228 x 108 x 63mm (9.00 x 4.25 x 2.32inches)
Weight	600g (MIT400/2) (1.32lbs)