Home Electrical, EV & Electronic Electrical Test Equipment (18th Edition) Insulation & Continuity Testers

Megger MIT410/2 Insulation Tester

SKU

1004-735

Rating:

(0)

Reward Points

485

£582.00 £485.00

In Stock

Free UK Delivery*

Description

Do even more with Megger's MIT410/2, the upgraded version of the MIT400/2!

Handheld and portable, the MIT410/2 is excellent for all basic insulation checks. This model can test at even more voltages than the MIT400/2 could, with 50V, 100V, 250V, 500V and 1000V test voltages available for effective insulation measurements up to 200GΩ.

As well as increased test voltage selection, the MIT410/2 also comes with other benefits compared to the MIT400/2. These include the ability to perform Pi, DAR and timed insulation tests, auto reverse polarity when testing continuity, frequency measurements and PASS/FAIL limit alarms. This is also the first model in the series to be supplied with a switched probe, allowing testing to be activated easily when only holding the test probe.

The Megger MIT410/2 is ideal for a wide variety of electrical and industrial applications including testing electrical installations, cable testing, motor testing, testing cars and other vehicles, avionics and much more.

This model is the official replacement for the original MIT410. This new model includes a number of improvements such as a redesigned case with back stand and a 6 cell battery compartment with separate fuse access.

Megger MIT410/2 Insulation Tester Key Features

Suitable for both electrical and industrial insulation testing
Selectable test voltages of 50, 100, 250, 500 and 1000V
Insulation testing of up to 200GΩ
Polarisation Index (PI) and Dielectric Absorption Ratio (DAR) functions
Continuity test from 0.01Ω to 10MΩ
Lock button on MΩ function
Auto reverse polarity setup (ON/OFF)
Lead null (<10Ω)
AC/DC voltage measurements to 600V
mV AC/DC range
Frequency measurements from 15 to 450Hz
PASS/FAIL limit alarms
Auto power down
Suitable for being powered by standard AA or NiMH rechargeable batteries
CAT IV 600V and CAT III 1000V safety rated

What's Included?

Megger MIT410/2 Insulation Tester
Red/Black Silicone Test Leads with Probes and Clips
SP5 Remote Switch Probe
Owners Information CD
6 x AA Alkaline Batteries
Hard Carrying Case

Megger MIT400/2 Series Comparison Chart

There are several models available in this series - this chart outlines the difference between each.

Parameter	MIT400/2	MIT410/2	MIT420/2	MIT430/2
Insulation
50/100V	-	√	√	√
250/500/1000V	√	√	√	√
Variable	-	-	√	√
√PI-/DAR/Timed	-	√	√	√
Lock Button on MΩ	√	√	√	√
Continuity
Continuity 0.01Ω to 1MΩ	100Ω	√	√	√
Auto Reverse Polarity (setup ON-OFF)	-	√	√	√
Lead √Null (<10Ω)	√	√	√	√
Voltage
AC/DC Volts 600V	√	√	√	√
mV AC/DC Range	√	√	√	√
Frequency Measurements 15 to 400Hz	-	√	√	√
Input Impedance	0.25MΩ	0.25MΩ	0.25MΩ	0.25MΩ
Capacitance
Capacitance 0.1nF to 10μF	-	-	√	√
Other Features
PASS/FAIL on Limit Alarms	-	√	√	√
Auto Power Down (setup)	√	√	√	√
On-Board Memory	-	-	√	√
Bluetooth Download + Software	-	-	-	√
AA Alkaline or NIMH	Both	Both	Both	Both
Recharger Ready	-	-	-	√
CAT IV 600V / CAT III 1000V	√	√	√	√

Accessories

Please find below a selection of accessories available for the Megger MIT410/2 Insulation Tester. For further information, please contact our sales team.

Our SKU	Megger's Part Number	Product
1010-013	1010-013	Magnetic Hanging Strap (MIT400 Mk2 / MIT480 Mk2)
1007-781	1007-781	1kV Silicon test leads w clips/prods
MEGITA1	1002-001B	Unfused Lead Set, Red/Black (Boxed)
MEGRCDA4	1002-015B	Fused Test Lead Set Red/Black Red FF500mA 50kA (Boxed)
1002-491	1002-491B	Prod & Clip Set - Insulation Testers
1007-637	1007-637	2.5 kV Silicone Test Leads + Clips x3
1000-562	1000-562	Test Lead Probe Cap [Clear] Bag of 20
5410-420	1007-169	Blow Moulded Case MIT400 Mk1 & Mk2 Series
1007-887	1007-887	Carry Pouch MIT400/2 Series
1002-774	1007-157B	Remote Switched probe SP5 CAT IV 600 (Boxed)
1001-976	1003-132B	Test Lead Set Red/Green Unfused (Boxed)
1001-977	1001-977B	Fused Lead Set Red Green F10A 50kA (Boxed)

Tech Specs

Megger MIT400/2 Series Technical Specifications

Insulation Accuracy
Test Voltage
MIT 400/2	250, 500 and 1000V
MIT 410/2, 420/2 and 430/2	50, 100, 250, 500 and 1000V
Test Voltage	Range	Accuracy
50V	10GΩ	±2% ± 2 digits ± 4.0% per GΩ
100V	20GΩ	±2% ± 2 digits ± 2.0% per GΩ
250V	50GΩ	±2% ± 2 digits ± 0.8% per GΩ
500V	100GΩ	±2% ± 2 digits ± 0.4% per GΩ
1000V	200GΩ	±2% ± 2 digits ± 0.2% per GΩ
Display Range	Analogue 1GΩ full scale
Resolution
Short Circuit/Charge Current	2mA +0% to -50% to EN 61557-2 (2007)
Open Circuit Voltage Insulation	-0 +2% ±2V
Test Current	1mA at min pass value of insulation to a max of 2mA max
Leakage	10% ± 3 digits
Voltage	3% ±3 digits ±0.5% of rated voltage
Timer Control	60 second countdown timer
Note	Above specifications only apply when high quality silicone leads are being used
Continuity
Continuity Measurement	0.01Ω to 999kΩ (0 to 1000kΩ on analogue scale)
Continuity Accuracy	± 3% ± 2 digits (0 to 100 Ω ) ±5% ±2 digits (100 to 500kΩ) (500kΩ to 1MΩ unspecified) Service Error: BS EN 61557-4 (2007) - ± 2.0%, 0.1 Ω - 2 Ω ± 6.8%
Open Circuit Voltage	5V ±1V
Test Current	200mA (-0mA to +20mA) (0.01Ω to 4Ω)
Polarity	Single polarity (default) / Dual polarity (configurable on setup)
Lead Resistance	Null up to 9.00Ω
Voltage
Voltage Range	AC: 10mV to 600V RMS sinusoidal (15Hz to 400Hz) DC: 0 to 600V
Volt Range Accuracy	AC: ±2% ±1 digit DC: ±2% ±2 digit Service Error: BS EN 61557-1 (2007) - ± 2.0% ± 2d, 0 V - 300 V AC/DC ± 5.1%
Waveform	Unspecified range: 0 – 10 mV (15 to 400 Hz) For non-sinusoidal waveforms additional specifications apply Non-sinusoidal waveforms: ±3% ± 2 digits >100 mV to 600 V TRMS ±8% ± 2 digits 10 mV to 100 mV TRMS
Frequency
Frequency Measurement Range	15Hz to 400Hz
Frequency Measurement Accuracy	±0.5% ±1 digit (100Hz to 400Hz unspecified)
Capacitance Measurement (MIT420/2 and MIT430/2)
Capacitance Measurement	1nF to 10μF
Capacitance Measurement Accuracy	±5.0% ± 2 digits (0.1nF to 1nF unspecified)
Storage (MIT420/2 and MIT430/2)
Storage Capacity	>1000 test results
Data Download	Bluetooth wireless Bluetooth Class II
Range	Up to 10m
General Specs
Battery Life	3000 inuslation tests with duty cycle of 5 seconds ON/55 sec off @ 1000V into 1MΩ
Dimensions	Instrument: 228 x 108 x 63mm (9.00 x 4.25 x 2.32inches)
Weight	600g (MIT400/2) (1.32lbs)