The most advanced overall model in Megger's MIT330 series, this comprhensive tester includes everything you'll need for testing both insulation and continuity.
Insulation testing can be performed at selectable test voltages of 250, 500 and 1000V with a built-in insulation limit alarm from 0.01MΩ to 999MΩ. Continuity testing can be performed across a wide range with an adjustable buzzer (and the option to disable) and dedicated voltage and resitance measurement functions are also included.
Megger's MIT330 is the only model in the MIT300 series which comes with internal memory and download to PC. This makes it significantly easier to manage and view back measurement data without the hassle of jotting everything down in a pad.
A number of other additional features are also included such as a built-in voltmeter, backlit display, locking test button and a protective cover for the unit when not in use.
Megger MIT330 Insulation and Continuity Tester Key Features
- Insulation test voltages of 250, 500 and 1000V
- Insulation limit alarm
- Continuity testing with adjustable buzzer
- Voltage measurements to 600V (AC/DC)
- Resistance measurements from 10Ω to 1MΩ
- Default voltmeter
- Backlit display with adjustable intensity
- Locking test button
- Auto shutdown when left idle
- Switched test probe - activate the tester using the probe
- IP54 weatherproofing
- Compatible with rechargeable batteries
- 1000 record memory with download
What's Included?
- Megger MIT330 Insulation and Continuity Tester
- Test Lead Set with Croc Clips
- SP4F Switched Probe
Accessories
Please find below a selection of accessories available for the Megger MIT330 Insulation and Continuity Tester. For further information, please contact our sales team.
Megger MIT300 Series Technical Specifications
Nominal Test Voltage | MIT310, 310A, 320, 330: 1000V, 500V, 250V (DC) MIT300: 500V, 250V (DC) |
Measuring Range | 10kΩ to 999MΩ on all ranges |
Short Circuit Current | 1.5mA nominal |
Test Current on Load | 1mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) |
Accuracy (at 20°C) | MIT300, 310, 320, 330: ±3% ± 2 digits up to 10MΩ, ±5% up to 100MΩ, ±30% up to full scale MIT310A: <2.5% of scale length (or 30% of reading 200kΩ to 10MΩ) |
Continuity | |
Measuring Range | 0.01Ω to 99.9Ω (0-50Ω on analogue scale) |
Open Circuit Voltage | 5V ± 1V |
Short Circuit Current | MIT300, 310, 320, 330: 205mA + 10mA -5mA MIT310A: 200-250mA |
Continuity Accuracy | MIT300, 310, 320, 330: ±3% ± 2 digits MIT310A: ±2.5% of scale length (or 30% of reading 0.2 to 2kΩ) |
Measuring Range | 0-2/20/200/2kΩ |
Open Circuit Voltage | 1.5V ± 0.5V |
Zero Offset Adjust | MIT300, 310, 320, 330: 0 - 9Ω MIT310A: 0 to 0.5Ω |
Continuity Buzzer | MIT300, 310: operates at <5Ω MIT 320, 330: adjustable from 1Ω to 20Ω MIT310A: operates at <5Ω MIT300, 310, 320, 330: response time <20ms MIT310: response time <100ms |
Resistance Range (MIT320/330) | |
Measuring Range | 10Ω to 1MΩ |
Open Circuit Voltage | 5V |
Short Circuit Current | 1.5mA |
Accuracy (at 20°C) | ±5 ± 2 digits up to 100kΩ |
Measuring Range (MIT310A) | 0 to 2kΩ (refer to continuity) |
Voltage Range | |
Measuring Range | 0 to 600V AC (50/60Hz) or DC |
Accuracy (at 20°C) | MIT310, 320, 330: DC or AC (50/60Hz): ±1% ± 2 digits MIT310A: ±2.5% of scale length for 50/60Hz |
Temperature Coefficient | <0.1°C per °C on all ranges |
Default Voltmeter | |
MIT310, 320, 330 | >25V AC or DC is applied display will operate as a voltmeter |
MIT300 | Beeps and flashes V on the display |
MIT310A | All modes including OFF |
Test Inhibit | If more than 50V is detected testing will be inhibited |
Reviews
SKU | MEGIT5 |
---|---|
Manufacturer Part Code | MIT330-EN |
Model Ref | MIT330 |
Country of Origin | United Kingdom |