Home Electrical, EV & Electronic Electrical Test Equipment (18th Edition) RCD Testers

Megger LRCD220 RCD Tester

SKU

LRCD220

Rating:

(0)

Reward Points

650

£780.00 £650.00

4 in Stock

Free UK Delivery*

Description

The Megger LRCD220 Single and 3 phase loop/RCD tester is used to diagnose faults with RCDs and to test crucial system circuits.

The Megger LRCD220 can be used flexibly on a variety of different systems. It provides safe 3-phase non trip loop testing and 1/2I, I and 5iI RCD testing on both selective and standard DC RCDs. This means that this tester is perfectly suited for those domestic installers who are seeking to test to UK Part P standards and requirements.

In addition, the Megger LRCD220 also offers the flexibility of 110V loop testing and 2-wire fast testing and the ability to perform phase-to-phase and phase-to-earth measurements.

The Megger LRCD220 tester is built to be entirely practical, with a robust protective rubber armoured case giving it ample protection; it is also weatherproof and has a protective front cover. It can test from 10mA up to 1000mA in complete safety and comes with a three-year warranty, but most of all, for installers and technicians, the tester is quick, simple and effective when in use.

Megger LRCD220 RCD Tester Key Features

Non trip loop testing
PFC and single phase function
High current loop testing
3 phase safe
Built-in voltmeter
1.2 x I, 1 x I test and 5 x I testing
Auto RCD testing
Touch/contact voltage display
10, 30, 100, 300, 500mA ranges
1000mA range
Compatible with AC, AC selective, DC and DC selective RCDs
Selectable phase
Ramp test
Frequency testing function
Phase rotation calculations
Backlight
IP54

What's Included?

Megger LRCD220 RCD Tester
Red/Black/Green 3 Wire Lead Set
AS/NZS 3112 Mains Plug Test lead

Accessories

There are a number of accessories available for the Megger LRCD220 RCD Tester. For further information please contact our sales team.

Our SKU	Megger Part Number	Product
MEGRCDA1	6231-601	UK Mains Plug Test Leadset 3-pin 1 wire (BS1363 plug)
MEGLTA2	1001-883	Test lead set 3-wire Red/Black/Green with prods/clips (exposed tip)
1001-976	1003-132B	Test Lead Set Red/Green Unfused (Boxed)
1000-562	1000-562	Test Lead Replacement Probe Cap [Clear] Bag of 20
6220-810	1004-323B	SIA10 Socket Interface Adaptor UK to 3 Leads x 4mm (Boxed)
1005-469	1005-469	SIA10 Socket Interface Adaptor LTW
1007-003	1007-003	Blow Moulded Case Catch - Pack of 10
MEGSW1	1000-631	Powersuite Lite - 17th Edition and PAT Certification Software
Please note that the accessories listed above and the attached datasheets are subject to change. Both were correct at the time of publication.

Tech Specs

Megger LRCD210/LRCD220 Technical Specifications

Voltage Measurements	0 V - 500 V
Voltage Accuracy	±2% ±2 digits
Frequency Measurement Range	25Hz to 450Hz
Frequency Accuracy	25.0Hz to 199.9Hz ±0.1Hz 200Hz to 450Hz ±1Hz
Phase Rotation Indicator (LRCD220 only)	Three wire identification of phase rotation.
Frequency	45Hz to 65Hz
Loop Testing	Loop ranges (to EN 61557-3)
No-Trip Loop Test (3 Wire, Line To Earth)	LRCD200/210 200V - 280 V 45Hz to 65Hz LRCD220 100V - 280 V 45Hz to 65Hz
Nominal Test Current	15 mA
Loop Accuracy	0.01 ½ - 9.99 ½ (±5% ±0.03 ½) 10.0 ½ - 99.9 ½ (±5% ±0.5 ½) 100 ½ - 999 ½ (±5% ±5 ½) 1.00 k½ - 2.00 k½ (±5% ±30 ½)
Hi Current Line/Earth Loop Test (2 Wire, LRCD220 Only)	Yes
Supply	100 V - 480 V
Nominal Test Current	15 mA to 2.4 A
Loop Accuracy	0.01½ - 9.99 ½ (±5% ±0.03 ½) 10.0½ - 99.9 ½ (±5% ±0.5 ½) 100½ - 999 ½ (±5% ±5 ½) 1.0 k½ - 2.00 k½ (±5% ±30 ½)
Line/Line (LRCD220 Only) Supply	100 V - 480 V 45Hz to 65Hz
Prospective Fault Current (PSCC)	Prospective fault current = Nominal supply voltage/Loop resistance Accuracy is derived from loop test 1 A - 199 A 1 A resolution 0.20 kA - 1.99 kA 10 A resolution 2.0 kA - 19.9 kA 100 A resolution
RCD Testing	RCD Test Ranges (to EN61557-6) LRCD200/210 10mA, 30mA,100mA, 300mA, 500mA LRCD220 10mA, 30mA,100mA, 300mA, 500mA, 1000mA
Supply Voltage	LRCD200/210 = 200 V - 280 V 45Hz to 65Hz LRCD220 = 100 V - 280 V 45Hz to 65Hz