Home Electrical, EV & Electronic Electrical Test Equipment (18th Edition) RCD Testers

Megger LRCD210 RCD Tester

SKU

LRCD210

Rating:

(0)

Reward Points

552

£662.40 £552.00

Free UK Delivery*

Description

The Megger LRCD210 is a combined loop and RCD tester designed to make life easier when performing test procedures.

The LRCD210 is the mid-range model available in the LRCD series, and it is capable of carrying out three phase safe non-trip loop testing 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. It is most suited towards UK domestic installers and adheres to all Part P requirements.

Megger has specially constructed this tester to withstand all common stresses including weatherproofing with IP54 ratings, a protective screen, and a tough armored casing to stop bumps, knocks, and drops from harming your tester.

When performing tests on RCDS the Megger LRCD210 is guaranteed not to trip the RCD. It also performs 3 wire low current non-tripping loop tests.

Megger LRCD210 Combined Loop and RCD Tester Key Features

Non-tripping Loop test. RCDs rated 30 mA or greater are not tripped by the loop test, even electronic RCDs
3 wire low current non-tripping loop test provides measurements from 0.01 ohms to 2 kohms
Auto-ranging tests.
Non-trip loop tester
RCD testing from 10 mA to 1000 mA
Extremely easy and safe to use
Built-in protective front cover
Tough Rubber armoured case
Weatherproof
PFC calculation and display from the loop test measurement
Supply voltage display on connection to circuit
Supply frequency measurement

Full List of Products Included

Megger LRCD210 RCD Tester
Red/Black/Green 3 wire lead set
Mains plug test lead set

Tech Specs

Megger LRCD210/LRCD220 Technical Specifications

Voltage Measurements	0 V - 500 V
Voltage Accuracy	±2% ±2 digits
Frequency Measurement Range	25Hz to 450Hz
Frequency Accuracy	25.0Hz to 199.9Hz ±0.1Hz 200Hz to 450Hz ±1Hz
Phase Rotation Indicator (LRCD220 only)	Three wire identification of phase rotation.
Frequency	45Hz to 65Hz
Loop Testing	Loop ranges (to EN 61557-3)
No-Trip Loop Test (3 Wire, Line To Earth)	LRCD200/210 200V - 280 V 45Hz to 65Hz LRCD220 100V - 280 V 45Hz to 65Hz
Nominal Test Current	15 mA
Loop Accuracy	0.01 ½ - 9.99 ½ (±5% ±0.03 ½) 10.0 ½ - 99.9 ½ (±5% ±0.5 ½) 100 ½ - 999 ½ (±5% ±5 ½) 1.00 k½ - 2.00 k½ (±5% ±30 ½)
Hi Current Line/Earth Loop Test (2 Wire, LRCD220 Only)	Yes
Supply	100 V - 480 V
Nominal Test Current	15 mA to 2.4 A
Loop Accuracy	0.01½ - 9.99 ½ (±5% ±0.03 ½) 10.0½ - 99.9 ½ (±5% ±0.5 ½) 100½ - 999 ½ (±5% ±5 ½) 1.0 k½ - 2.00 k½ (±5% ±30 ½)
Line/Line (LRCD220 Only) Supply	100 V - 480 V 45Hz to 65Hz
Prospective Fault Current (PSCC)	Prospective fault current = Nominal supply voltage/Loop resistance Accuracy is derived from loop test 1 A - 199 A 1 A resolution 0.20 kA - 1.99 kA 10 A resolution 2.0 kA - 19.9 kA 100 A resolution
RCD Testing	RCD Test Ranges (to EN61557-6) LRCD200/210 10mA, 30mA,100mA, 300mA, 500mA LRCD220 10mA, 30mA,100mA, 300mA, 500mA, 1000mA
Supply Voltage	LRCD200/210 = 200 V - 280 V 45Hz to 65Hz LRCD220 = 100 V - 280 V 45Hz to 65Hz