Reward Points
:
550
£660.00
£550.00
Free UK Delivery*
Megger EVX100 Electric Vehicle Charge-Point Adaptor
The EVX100 is a fully integrated accessory for the MFT-X1, providing an automated test interface for single and three-phase Mode 3 AC electric vehicle charging stations (EVSE). Together, they eliminate the need for a traditional remote manual adaptor or control box. Once connected, the MFT-X1 automatically recognizes the EVX100 and provides the required testing options without manual intervention.
The EVX100 supports various EV charger testing options, all controlled through the MFT-X1 interface. The system is designed for single and three-phase testing with automatic control of PP and CP states. The MFT-X1 can identify all operational CP states (A, B, C, D) and their intermediate states (A1, A2, B1, B2, etc.).
Additionally, the EVX100 detects PE issues automatically, with feedback via the dual (ambidextrous) test buttons on the MFT-X1. The PE warning function is integrated into the MFT-X1, eliminating the need for manual touch buttons.
The EVX100 has a Type 2 charging plug and automates the testing of IEC61851 and IEC62955 protective devices. When an RCD trips during testing, the EVX100 automatically resets the EV charger as soon as power is restored, removing the need for manual intervention with a CP knob.
The instrument operates with all MFT-X1 instruments when updated with the latest free firmware from Megger's website. The EVX100 has a lithium-ion battery, a USB Type-C charging port, and an IP54 rating.
Please note the MFT is not included and must be purchased separately.
Key Features
- Integrated accessory for MFT-X1
- Automated testing for single and three-phase Mode 3 AC EVSE
- No need for a manual adaptor or control box
- Automatic PP and CP state control
- Identifies all four operational CP states (A, B, C, D) and intermediate states (A1, A2, B1, B2, etc.)
- PE issue detection via MFT-X1 test buttons
- Type 2 charging plug included
- Automated testing for IEC61851 and IEC62955 protective devices
- RCD auto-reset during trips
- Compatible with all MFT-X1 instruments (requires firmware update)
- Powered by a lithium-ion battery with a USB Type-C charging port
- IP54 rating for outdoor use
What's Included?
- EVX100 adaptor
- Carry case
- User manual
| Power Supply | Internal battery: Li-ion 3180 mAh |
|---|---|
| Recharging | Type C USB (required supply is 5 V, 1 A maximum) |
| Charging Status | LED |
| Input Voltage | 230 V AC nominal max 253 V AC 400 V AC nominal max 440 V AC |
| Input Frequency | 50/60 Hz |
| CP State Verification | A1, A2, B1, B2, C1, C2, E, F |
| Connection Options | Fixed Type 2: IEC 62196-1 |
| Safety | IEC61010-1:2010 61010-031:2015, CAT II 250 V |
| Temperature Range | Working: -10 °C to +55 °C Storage: -25 °C to +70 °C |
| Humidity Range | 90% R.H at +40 °C max |
| Ingress Protection | IEC 660529: IP 54 - protected against dust and water splashes; suitable for indoor and outdoor use |
| Vibration | MIL-PRF-28800F: Class 2 |
| Maximum Operating Altitude | 2000 m |
| Pollution Degree | 2 |
| Mechanical | EVX Case Dimensions: 133.5 x 115 x 56 mm (5.2 x 4.5 x 2.2 inches) excl. cable |
| Unpackaged Weight | 976 g |
| Packaged Dimensions | 350 x 280 x 75 mm (13.8 x 11.02 x 2.96 inches) |
| Packaged Weight | 1580 g |
| Cable Length | 2 m |
Reviews
Additional Information
| SKU | 1016-183 |
|---|---|
| Manufacturer Part Code | 1016-183 |
