Megger DPM1000 Power Clamp Meter

Megger DPM1000 Power Clamp Meter

The Megger DPM1000 Power Clamp Meter is a combined power meter, harmonics meter, and data logger. It can be used to measure the following electrical parameters:

• AC/DC voltage up to 1000V (measured using the supplied test leads)
• AC/DC current up to 1000A (measured by clamping the jaw around the conductor)
• True RMS resistance up to 100kΩ
• Inrush peak current
• Power: power factor, energy consumption, frequency, harmonics (up to the 25^th harmonic), total harmonic distortion, distortion factor, and capacitance (all measured by using the supplied test leads and clamping the meter’s jaws around a conductor)
• Watt up to 1MW
• Temperature (using the thermocouple probe provided)

The Megger DPM1000 Power Clamp Meter also offers diode tests and 3-phase rotation indication and features a non-contact voltage alert and a continuity beeper. It is auto-ranging and includes Data Hold, Min/Max and Peak Hold measurement functions.

Readings are displayed on the backlit LCD. Users can view all possible measurements at the touch of a button or by turning the measurement dial. When idle, the Clamp Meter’s backlight will automatically switch off.

Up to 9999 measurements can be logged to the DPM1000’s non-volatile memory at a rate ranging from every second to every 600 seconds. Data can be wirelessly transferred in real-time from the Megger Clamp Meter to a smartphone or tablet, with the Megger Link™ app installed (available for Android and iOS), via Bluetooth. It supports a maximum transmission range of 10m.

Finally, the Megger DPM1000 Power Clamp Meter has been designed to meet the requirements of BSEN 61010-1 CAT IV 600V for supply-side applications and features an integrated LED torch to enable use in dark spaces.

Overall it is a comprehensive, practical, and easy-to-use three-in-one power meter, harmonics meter, and data logger. It is ideal for measuring mains power quality and applications involving the development, installation, maintenance, and repair of equipment used in power electronics and power engineering.

Key Features

• A combined power meter, harmonics meter and data logger
• AC/DC voltage up to 1000V 
• AC/DC current up to 1000A 
• True RMS resistance up to 100kΩ
• Inrush peak current
• Power factor
• Energy consumption
• Frequency
• Harmonics (up to the 25^th harmonic)
• Total harmonic distortion
• Distortion factor
• Capacitance 
• Watt up to 1MW
• Temperature (using the thermocouple probe provided)
• Diode test
• 3-phase rotation indication
• Non-contact voltage alert
• Continuity beeper
• Auto-ranging
• Data Hold
• Min/Max
• Peak Hold
• Backlit LCD
• View all measurements at the touch of a button or by turning the measurement dial
• Log up to 9999 measurements to the non-volatile memory
• Logging rate: 1s to 600s
• Wirelessly transfer data in real-time via Bluetooth to a smartphone or tablet with the Megger Link™ app installed (available for Android and iOS)
• Transmission range: 10m
• Meets the requirements of BSEN 61010-1 CAT IV 600V for supply-side applications
• Integrated LED torch
• A comprehensive, practical, and easy-to-use three-in-one power meter, harmonics meter, and data logger
• Ideal for measuring mains power quality
• Suitable for applications involving the development, installation, maintenance, and repair of equipment used in power electronics and power engineering

What’s Included?

• Megger DPM1000 Power Clamp Meter
• Megger DCM 4mm Spare Lead Set
• Megger TP-90 Thermocouple Probe
• Hard Carry Case