Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Megger DET4TD2 Earth Tester
- Two, three and four point testing
- Stakeless testing
- Failure indication
SKU
MEGET11
MPN
1000-347
Megger's DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.
Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There's also a button built into the front of the instrument for switching between 25 and 50V modes.
This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).
The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.
This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 "Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures".
Megger DET4TD2 Key Features
- 2, 3 and 4 wire testing with no shorting links required
- IP54 ingress protection
- C spike, p stake and noise checks
- Noise rejection 40V peak to peak
- Instrument output voltage of ±25V or ±50V at 128Hz
- Instrument current output at 4.5mA or 0.45mA
- Resistance range of 0.01 to 20kΩ
- Earth voltage range of 0-100V
- LCD display
- Easy to use
- Runs on 8 x AA batteries
Full List of Products Included
- Megger DET4TD2 Earth Tester
- Hard Carry Case
- Stake and Wire Kit (15m, 10m and 3m)
- Right Angle Terminal Adaptors (to connect bare wires to terminals)
- Calibration Certificate
- Batteries
Accessories
There are a number of accessories available for the Megger DET4TD2 Earth Tester. For further information regarding the products below, please contact our sales team.
| Our SKU | Megger's Part Number | Product |
| ICLAMP | 1001-012 | ICLAMP 1000A AC Current Clamp |
| VCLAMP | 1001-013 | VCLAMP Voltage Clamp |
| 1010-518 | 1010-518 | MVC1010 Voltage Clamp |
| 1010-516 | 1010-516 | MCC1010 Current Clamp |
| MEGETA23 | 6220-804 | 2 Earth Spikes (200 mm, 8 mm dia.) |
| MEGETA24 | 6220-803 | RA Terminal Adaptor Set |
| 1007-003 | 1007-003 | Blow Moulded Case Catch - Pack of 10 |
| 6220-807 | 6220-807 | I Clamp Lead |
| 6220-808 | 6220-808 | V Clamp Lead |
| 6220-839 | 6220-839 | Ground Spike Assembly |
| 1000-526 | 1000-526 | 4-Terminal Lead Set - DET4TX |
| 1000-523 | 1000-523 | Spare Earth Spikes (x2) DET3TX & DET4TX |
| 1000-527 | 1000-527 | Blow Moulded Case [Small] DET3 & 4 |
| 1000-528 | 1000-528 | Blow Moulded Case [Large] DET3 & 4 |
| 1000-530 | 1000-530 | Battery AA NiMH 1.2V (x8) |
| 1000-531 | 1000-531 | Mains Charger - DET3TX & DET4TX |
| 6320-245 | 6320-245 | Professional Earth Test Kit, comprising - 4 auger spikes, 4 cable reels (2x50m and 2x30m), electrode test cable 4m, tape measure and carry case |
| 1000-524 | 1000-254 | Auger Earth Spike DET3TX & DET4TX |
| 1000-349 | 1000-349 | Cable Reel Accessory (50m Red) |
| 1000-350 | 1000-350 | Cable Reel Accessory (50m Black) |
| 1000-361 | 1000-361 | Cable Reel Accessory (30m Yellow) |
| 1000-362 | 1000-362 | Cable Reel Accessory (30m Green) |
| 1010-176 | 1010-176 | 30m Earth Test Cables & Spikes Kit |
| 1010-177 | 1010-177 | 50m Earth Test Cables & Spikes Kit |
| 1010-178 | 1010-178 | 100m Earth Test Cables & Spikes Kit |
| 1010-179 | 1010-179 | 50m Earth Test Cables, Spikes & Clamps Kit |
| 1010-180 | 1010-180 | 100m Earth Test Cables, Spikes & Clamps Kit |
| MEGETA16 | 6310-755 | ETKIT Earth Test Kit - 4 Terminal |
| MEGETA17 | 6210-160 | ETKIT3 Earth Test Kit - 3 Terminal |
| MEGETA18 | 6210-161 | ETKIT4 Earth Test Field Kit - 4 Terminal |
| MEGETA19 | 6121-119 | Lead Earth Test 50m Reel |
| AVTM25-TA | AVTM25-TA | Getting Down to Earth Booklet |
| Please note that the accessories listed above and the attached datasheets are subject to change. Both were correct at the time of publication. | ||
£840.00
£1,008.00 inc vat
4 in Stock:
Available Next Working Day*
Technical Information
Specification
Megger DET4TR2 Technical Specifications
| Ingress Protection | IP54 |
| C Spike, P Stake and Noise Check | Automatic |
| Noise Rejection | 40V Peak to Peak |
| 2-Wire, 3-Wire, 4-Wire Tests | Yes, with no shorting links required |
| Instrument Output | Voltage: ± 25V or ± 50V at 128Hz Current: 4.5mA or 0.45mA |
| Resistance Range | 0.01Ω to 20kΩ |
| Earth Voltage Range | 0 to 100V |
| Resistance Accuracy | 2P measurements: 2% ±3 digits 3P measurements: 2% ±3 digits 4P measurements: 2% ±3 digits |
| Maximum Probe Resistance | Rp limit: 100 kΩ (50 V output voltage) Rc limit: 100 kΩ (50 V output voltage) Limits reduced to 50 kΩ for 25 V output voltage Limits reduced to 5 kΩ for 0.01 Ω resolution |
| Ground Voltage Range | 0 to 100V AC |
| Ground Voltage Accuracy | 2% ± 2V |
| Display | 3 1/2 high contrast liquid crystal |
| Battery Type | 8 x AA (LR6) NiMH Rechargeable Cells |
| Operating Temperature Range | -15 to +55 ºC / 5 ºF to 131 ºF |
| Storage Temperature Range | -40 to +70ºC / -40 ºF to 158 ºF |
| Safety | Complies with the requirements of IEC61010-1 100 V CAT IV between terminal pairs.* * The CAT IV 100 V is dependant on the use of a leadset of at least this rating, for example the optional two wire leadset part number 1001-858. |
| EMC | In accordance with IEC61326-1 |
| Standards Compliance | Complies with the requirements of KEMA K85B. Complies with the following parts of EN61557, “Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures”. Part 1 - General requirements Part 5 - Resistance to earth |
| Dimensions | 203 x 148 x 78 mm (8 x 5.8 x 3 inches) |
| Weight | 1 kg (2.2lb) |
Document Downloads
Additional Information
SKU
MEGET11
Manufacturer Part Code
1000-347
Model Ref
DET4TD2
Country of Origin
United Kingdom
Accessories
Product
SKU
MPN
Price (Ex VAT)
Megger DET4TD2 Earth Tester
£840.00
£1,008.00 inc vat
£840.00
£1,008.00 inc vat