Megger CG-90250 SDRM201 for EGIL
- Enables resistance measurement on circuit breakers
- Suitable for use with EGIL
- Small and lightweight
The Megger SDRM201 CG-90250 is a static and dynamic resistance measurement accessory for the EGIL. The EGIL must be equipped with the SDRM option, and you'll need CABA Win version R03A or higher.
The SDRM201 is intended for static and dynamic resistance measurements (SRM and DRM) on high-voltage circuit breakers or other low-resistive devices. Using the SDRM201 with the test instrument, you can measure the current and voltage drop across the circuit breaker contacts. The measuring unit can then calculate the resistance as a function of time.
The system consists of an SDRM201 unit with current cables and an SDRM Cable. The SDRM Cable is a small box with integrated cables for connecting the SDRM201 and the test instrument.
Key Features
- Enables resistance measurement on circuit breakers
- Small and lightweight
- Several operations can be run with short waiting intervals
- Suitable for use with EGIL
What's Included?
- SDRM Cable
- SDRM multi-cable extension
- Voltage sense cable
- Voltage sense extension cable
- Current cable, red
- Current cable, black
- Clamps (2 pcs)
- Ground cable
Call 01642 931 329 or complete the form:
| SDRM201 | |||
|---|---|---|---|
| Inaccuracy is specified for 1 year after calibration at 22 °C to 28 °C, relative humidity of 90%. Specifications are valid, after 30 minutes of warm-up time. Specifications are subject to change without notice. | |||
| Environment | Application Field | The instrument is intended for use in high-voltage substations and industrial environments | |
| Installation Category | CAT I | ||
| Pollution Degree | 2 | ||
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) | ||
| Storage & Transport Temperature | -40°C to +70°C (-40°F to +158°F) | ||
| Vibration | IEC 60068-2 - 6, 2 g for 5- 500 Hz | ||
| Shock (non-operating) | IEC 60068-2-27, 30 g, half-sine, 11 ms | ||
| Degree of Protection SDRM201/202 (Box) and SDRM Cable Interconnected | IP 43 | ||
| Degree of Protection SDRM Cable | IP 41 | ||
| Humidity | 5% - 95% RH, non-condensing | ||
| CE-Marking | LVD | 2006/95/EC | |
| EMC | 2004/108/EC | ||
| General | Power Inlet | 24 V / 2.5 A | |
| Power Inlet Voltage | 24 V DC (max) 21 V DC (min) | ||
| Power Inlet Current | 2.5 A (max 50% intermittence) | ||
| Dimensions | 160 x 240 x 90 mm, (6.3”x 9.4”x 3.5”) excl. binding posts | ||
| Weight | 1.3 kg (2.9 lbs), 2.5 kg (5.5 lbs) incl. current cables | ||
| Total Weight incl. Transport Case with Accessories | 9.4 kg (20.7 lbs) | ||
| SDRM Cable EGIL | 0.2 m (0.7 ft), 0.6 kg (1.3 lbs) | ||
| Extension Cable | 7.5 m (24.5 ft), 0.7 kg (1.5 lbs) | ||
| CURRENT OUTPUT Terminals - and + | |||
| SDRM201 - Terminals | Open Circuit | 2.5 V DC (max) | |
| Instantaneous Short Circuit Current (max) | 500 A DC | ||
| Short Circuit Current (max) After 2 Seconds | 150 A ±10% | ||
| Instantaneous Minimum Current with Cables | 200 A DC | ||
| Minimum Current with Cables After 1 Second | 140 A DC | ||
| Overvoltage Protection | 45 V between terminals and between terminals and ground | ||
| Not to be connected to circuits generating peak power pulse above 1500 W (10/1000 μs) | |||
| EGIL SDRM Cable - Terminal | |||
| Measurement ranges | DRM / MOTION mode | 0 - 32 mΩ | |
| SRM mode | 0 - 2 mΩ | ||
| DRM mode | 0 - 32 mΩ | ||
| SRM inaccuracy | 2% ±2 μΩ | ||
