Containing a Martindale VI15000 Voltage Indicator, PD690SRD Proving Unit, TC71 Combination Carry Case, and LOKKITPRO 17-Piece Lockout Kit, the Martindale VIPDLOKPRO150-S Voltage Indicator, Proving Unit, & Pro Lockout Kit is a comprehensive safe isolation kit. It is an essential safety aid for electricians, and maintenance and service technicians working in CAT IV 1000V environments.
The Martindale VI15000 Voltage Indicator can be used to check for the presence of AC/DC voltages between 50 and 1000V. Bright LEDs indicate the voltage range and polarity. Furthermore, the Martindale VT15000 Voltage Indicator is GS38 and BS EN 61243-3 compliant. It also features a heavy-duty, double-insulated cable with a contrasting inner lining for revealing damage.
Verify the functionality of the VI15000 Voltage Indicator using the industry-leading 690V Martindale PD690SRD Proving Unit. This proving device is suitable for checking high- and low-impedance meters. For maximum convenience, the Martindale PD690SRD Proving Unit can be used through the TC71 Combination Carry Case.
Finally, this safe isolation kit includes a 17-piece LOKKITPRO Lockout Kit which is comprised of:
The Martindale VIPDLOKPRO150-S Voltage Indicator, Proving Unit, & Pro Lockout Kit contains all the equipment needed to maintain compliance with safe isolation regulations and health and safety recommendations.
Electrical | |
Nominal voltage range | 50 - 1000V DC/AC rms |
Nominal voltage threshold indications | ± 50, 120, 230, 400, 690 V DC/AC rms |
Voltage threshold tolerance | Conforms to BS EN 61243-3 |
Polarity & voltage indication | 50V DC/AC rms |
AC/DC voltage detection | automatic |
Range detection | automatic |
Response time | <0.1s |
Frequency range | DC, 1 - 400Hz |
Test current | < 3.5mA at 1000V DC/AC rms |
Duty ratio | 30s ON (operated) / 240s OFF (recovery) |
Environmental | |
Temperature & Humidity (Operating & Storage) | -10°C to 55°C ≤ 85% R.H. |
Altitude | up to 2000m |
General | |
Power | From circuit under test |
Dimensions | 205(L) x 67(W) x 27(D) mm |
Weight | 130g approx. |
Safety | |
Conforms to | BS EN 61243-3 CAT IV 1000 V |
Class II, Double Insulation | |
Pollution Degree 2 | |
EMC | Conforms to BS EN 61326-1 |
Output voltage | 690V, 440V, 230V, 120V or 50V nominal |
Output frequency | DC or 50Hz nominal |
Environmental | |
Operating temperature | -10°C to 40°C at max. 70% R.H. |
Altitude | up to 2000m |
Pollution degree | 2 |
General | |
Internal batteries | 6 x 1.5V, AA alkaline batteries (IEC LR6, NEDA 15A |
Dimensions | 150 x 80 x 35mm |
Weight packed | 350g approx. with batteries |
Includes | 6 x 1.5V AA alkaline batteries, instructions |