Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Martindale TL326-EV Electric Vehicle Charger Test Adaptor
- Type-2 Electric Vehicle charger plug
- Slider switch for CP Mode selection
- CP Error Simulation
SKU
MARTL326-EV
MPN
TL326-EV
The Martindale TL326-EV simplifies the connection of test equipment to EVSE charging points with a Type-2 connector. It is suitable for single- and three-phase applications and provides access to L1, L2, L3, N, CP, and PE connections.
The CP mode slider switch allows users to simulate vehicle states, including an “E” (error) mode to replicate CP signal failures. The LED indicators display the status of the CP and phase connections. It is compatible with EV-ready Multifunction Testers (MFTs) via standard 4mm jack plugs and supports all relevant measurements through standard inputs.
Key Features
- Type-2 Electric Vehicle charger plug
- LED status indicators for CP, L1, L2, L3
- Slider switch for CP Mode selection
- Standard 4mm sockets for instrument
- Connection to L1, L2, L3, N, CP and PE
- CP Error Simulation
- Carry case included
What's Included?
- TL326-EV Electric Vehicle Charger Adapter
- TC68 Soft Carry Case
Technical Information
Specification
| ELECTRICAL | |
|---|---|
| Nominal Operating Voltage | 230V ~ / 400V 3 ~ |
| Operating Frequency | 10HZ - 499HZ |
| GENERAL | |
| Dimensions | approx. Plug 230 x 60 x 55mm |
| Weight | 300g |
| Mains Socket and Lead Rating | max. 10A |
| PP Simulation | Setup internally to 20 A |
| CP Simulation | States A, B, C |
| Error Simulation | CP error “E” |
| Test Connector Type | IEC 62196-2 Type 2 male |
| ENVIRONMENTAL | |
| Location | Suitable for indoor and outdoor use in dry weather conditions only |
| Altitude | up to 2000m |
| Operating Temperature Range | 0°C to 40°C |
| Storage Temperature | -0°C to 50°C |
| Relative Humidity Range | 0 - 80%RH |
| Mains Supply Voltage Fluctuations | ±10% |
| Overvoltage Category | CAT II 300V |
| Pollution Degree | 2 |
| SAFETY | |
| Conforms to | BS EN 61010-1, BS EN 61010-031 |
| Rating | Class II, Reinforced insulation |
Document Downloads
Martindale TL326-EV Electric Vehicle Charger Test Adaptor Datasheet
Martindale TL326-EV Electric Vehicle Charger Test Adaptor User Manual
Additional Information
SKU
MARTL326-EV
Manufacturer Part Code
TL326-EV
Martindale TL326-EV Electric Vehicle Charger Test Adaptor
£325.00
£390.00 inc vat
£325.00
£390.00 inc vat