Reward Points
:
43
£52.20
£43.50
Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester
The Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester is capable of detecting twenty-eight fault conditions in sockets. It can also be used to check mains voltage levels and verify the safety of the socket’s earth wiring by performing a non-trip earth loop test.
The results of the non-trip earth loop test are indicated in six discrete ranges from less than 1.7Ω to 500Ω. Traditional socket testers tend to detect the presence of earth and will indicate an earth connection despite resistance levels as high as 500kΩ. This can prove dangerous as a low earth resistance is required to ensure that safety disconnection devices are operating correctly, thereby preventing electrocution when faults occur. The Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester prevents false earth readings.
The Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester also features red and green LEDs for indicating twenty-eight fault conditions as well as high and low voltage indications.
The Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester features a tough sculpted design for easy removal. It is an advanced socket tester as defined by the Health & Safety Executive and can be used to check the wiring and safety of sockets.
| Comparison Chart | EZ165 | EZ365 |
|---|---|---|
| Indicate Functional Socket | ✔ | ✔ |
| Detect Line/Neutral Reversal | ✔ | ✔ |
| Detect Presence of Earth | ✔ | ✔ |
| Audible Indication | ✘ | ✔ |
| Mains Voltage Check | ✔ | ✔ |
| Earth Loop Impedance Range | ✔ | ✔ |
| Polarity Swap Touch Test | ✘ | ✔ |
| 30mA RCD Trip Check | ✘ | ✔ |
Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester Key Features
- Detects twenty-eight fault conditions in sockets
- Check the mains voltage levels
- Verifies the safety of the socket’s earth wiring using a non-trip earth loop test
- Results of the non-trip earth loop test are indicated in six discrete ranges from 1.7Ω to 500Ω
- Prevents false earth readings
- Red and green LEDs for indicating twenty-eight fault conditions
- High and low voltage indication
- Tough, sculpted design for easy removal
- Advanced socket tester as defined by the Health & Safety Executive
- Check the wiring and safety of sockets quickly and easily
What’s Included?
- Martindale EZ165 Advanced Socket & Non-trip Earth Loop Tester
- Instruction Manual
Martindale EZ165/EZ365 Technical Specifications
| Function | EZ165 | EZ365 |
|---|---|---|
| Electrical | ||
| Nominal operating voltage | 230V AC rms | |
| Operating frequency | 50Hz | |
| Power consumption | <2.5W | |
| Power | from mains socket under test | |
| Standby | after approx. 10 minutes | |
| Non-trip earth loop impedance ranges | 0 - 1.7 - 5 - 10 - 100 - 200 - 500Ω | |
| Earth loop threshold accuracy | ± (10% + 0.3Ω)* | |
| Voltage low indication | <195V ± 5% | |
| Voltage high indication | >270V ± 5% | |
| Earth neutral voltage high indication | >30V nominal | |
| Open earth indication | >500Ω ± 10% | |
| RCD test current at 195V | N/A | 30mA |
| Duration of RCD test current | N/A | 300ms |
| Polarity | N/A | reversal test (L-NE swap at incoming supply) |
| General | ||
| Dimensions | 65 x 80 x 59mm | |
| Weight | 93g | |
| Environmental | ||
| Temperature (Operating & Storage) | -10°C to 40°C, at max. 60% RH | |
| Altitude | up to 2000m | |
| Pollution degree | 2 | |
| Safety | ||
| Conforms to | BS EN 61010-1, CAT II 300V, Class II, Double insulation | |
| EMC | ||
| Conforms to | BS EN 31326-1 | |
| Note | * Measurement accuracy can be affected by highly inductive or capacitive loads distributed on the supply | |
Reviews
Additional Information
| SKU | MARTST4 |
|---|---|
| Manufacturer Part Code | MAREZ165 |
