Reward Points
:
2100
£2,520.00
£2,100.00
Free UK Delivery*
Mark-10 WT3-201 Manual Wire Crimp Pull Tester
The Mark-10 WT3-201 Manual Wire Crimp Pull Tester can be used to measure the pull-off force of crimped wire and tube terminations. The ergonomic lever enables the application of up to 200 lbF (1000 N) of crimp pull force while its adjustable wire terminal grip enables testing of wires with diameters up to AWG 3 (0.25”/ 6.3mm). It is compatible with most wire insulation types.
WT3 200
The Mark-10 WT3-201 Manual Wire Crimp Pull Tester has a sample rate of 7000Hz and provides real-time force and peak-force measurements. Readings are visible on the large, backlit LCD display, as is an analogue load bar, which provides a graphical representation of the applied force. Moreover, the Mark-10 WT3-201 Manual Wire Crimp Pull Tester offers programmable set point indicators, PASS/FAIL limits and outputs, and audio alarms and key tones, as well as selectable measurement units. Settings are password-protected to prevent unauthorised or accidental changes.
Data can be saved to the internal memory: the Mark-10 WT3-201 Manual Wire Crimp Pull Tester has the capacity to store up to 1000 readings. Measurements may be transferred to a PC via a USB, RS-232, Mitutoyo (Digimatic) or analogue output. Additionally, when the sample breaks, the Mark-10 WT3-201 Manual Wire Crimp Pull Tester will automatically save and output data as well as zero itself. This helps to automate testing.
Finally, the Mark-10 WT3-201 Manual Wire Crimp Pull Tester includes mounting holes for bench mounting.
The Mark-10 WT3-201 Manual Wire Crimp Pull Tester is an ergonomic and easy-to-use tester.
Mark-10 WT3-201 Manual Wire Crimp Pull Tester Key Features
- Measure the pull-off force of crimped wire and tube terminations
- The ergonomic lever enables the application of up to 200lbF (1000 N) of crimp pull force
- Adjustable wire terminal grip enables testing of wires with diameters up to AWG 3 (0.25”/ 6.3mm)
- Compatible with most wire insulation types
- Sample rate: 7000Hz
- Real-time force and peak-force measurements
- Large, backlit display
- Analogue load bar provides a graphical representation of the applied force
- Programmable set point indicators
- Programmable PASS/FAIL limits and outputs
- Configurable audio alarms and key tones
- Selectable measurement units
- Password-protected settings prevent unauthorised or accidental changes
- Internal memory: save up to 1000 readings
- Transfer data to a PC via a USB, RS-232, Mitutoyo (Digimatic) or analogue output
- When the sample breaks data is automatically saved and outputted
- When the sample breaks, the tester zeros itself
- Mounting holes for bench mounting
- An ergonomic and easy-to-use wire crimp pull tester
What’s Included?
- Mark-10 WT3-201 Manual Wire Crimp Pull Tester
- Removable Lever
- USB Cable
- Battery
- AC Adapter
- Certificate of Calibration without Data
Mark-10 WT3-201 Manual Wire Crimp Pull Tester Technical Specifications
| Force Capacity | 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1,000 x 0.5 N, 1 x 0.0005 kN |
| Accuracy | ±0.2% of full scale |
| Wire diameter range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] |
| Minimum sample length | 6.0 in [152 mm], excluding termination |
| Max. elongation | 1.15 in [29.2 mm] |
| Power | AC adapter: 100-240VAC, 50-60 Hz, 0.3 A Battery: Rechargeable 8.4V NiMH Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage. |
| Sampling Rate | 7,000 Hz |
| Outputs | USB / RS-232: Configurable up to 115,200 baud |
| Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices | |
| Analog: ±1 VDC, ±0.25% of full scale at capacity | |
| Safe overload | 150% of full scale (display shows “OVER” at 110% and above) |
| Weight | 16.1 lb [7.3 kg] |
| Environmental requirements | 40 - 100°F, max. 96% humidity, non-condensating |
Reviews
Additional Information
| SKU | WT3-201U |
|---|---|
| Manufacturer Part Code | WT3-201U |
