Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Kewtech KT64DL Multifunction Tester with EV Option
Free Gift
Preorder Due April
- Anti-Trip Technology
- RCD ramp test function
- SPD testing
- Gold-plated probe tips
SKU
KT64DL
MPN
KT64DL
Introducing the UK's smallest MFT with add-on EV Testing options
Big on Features
KT64DL Multifunction Tester with EV testing.
The Kewtech KT64DL has a loop testing circuit and continuously monitors live voltage, protecting users when conducting dead tests. The Anti-Trip Technology (ATT) ensures accurate loop testing of RCD-protected circuits, and the auto RCD test mode simplifies the process, with test results for Type AC, A, ACS, AS, auto, and ramp RCDs.
It supports various RCD test values, including 10mA, 30mA, 100mA, 300mA, and 500mA. It also has a single rotary dial, a large screen display, and an IP54 rating.
The unit also includes ultra-slim and gold-plated probe tips, continuity testing with a switchable buzzer and auto-null, insulation testing at 250V, 500V, and 1000V with voltage warning and auto discharge, and high-precision loop testing with low and high current options.
EV & SPD Testing
- 6mA DC test at 0 & 180 for EV charge point testing
- SPD testing with DC & AC breakdown voltage
Additional KEWEVSE or KEWEVA required.
Magnetic Base
The magnetic base allows for hands-free attachment to metal cabinets and distribution boards.
Key Features
- Easy to use and straightforward interface with single rotary dial and large screen display
- Magnetic base for hands-free attachment to metal cabinets
- New design ultra-slim probe tips for access to push-fit connector blocks
- Constant live voltage detection protects when dead testing
- No Bangs – continuous live monitoring prevents blown fuses or PCBs
- Electronic 'hands-free' lock-down test button
- IP54, even when the leads are not plugged in
- End-of-line calibration certificate
- Includes soft carry case, mains lead, distribution board leads, and padded neck strap
- Continuity - switchable buzzer and auto-null
- Insulation - 250, 500 & 1000V with voltage warning LED and auto discharge
- Loop - ATT (low current), high current 0.01 ohm resolution
- Anti-trip Technology for full no-trip loop testing of RCDs with low susceptibility to uplift and noise interference
- PSC/PFC - clear indication of what is being tested and displayed with loop reading
- RCD - Type AC, A, ACS, AS, auto & ramp
- Type AC RCDs - Tests 10mA, 30mA, 100mA, 300mA & 500mA
- Type A RCDs - Tests 10mA, 30mA, 100mA & 300mA
- 6mA DC test at 0 & 180 for EV charge point testing
- 30mA x 1 RCD test at 0 & 180
- RCD auto-test mode for 30mA RCDs
- RCD ramp test function
- SPD testing
- Gold-plated probe tips for more consistent readings
- Polarity check for instant wiring status verification
What's Included?
- KT64DL Multifunction Tester
- ACC063 distribution board test lead set
- Kamp 12 mains lead
- Batteries
- Printed Instruction Manual
- End of line Calibration Certificate
- Soft carry case
Offers
Free Electrician's Accessory
- PASS WS-9050 5 IN 1 Automatic Wire Stripper and Crimper - WS-9050, typically £19.99
- Lockout Starter Kit - Incl. Hasps, Padlocks, Tags, MCB Lockout & More - LT-LPP, typically £25.00
- TestSafe Fibreglass Fish Tape Cable Puller – 30m - TS-FG-FT-30M, typically £24.99
Technical Information
Specification
| Continuity | |||
|---|---|---|---|
| Open Circuit Voltage (DC) | Short Circuit Current | Ranges (Auto Range) | Accuracy |
| >4V, <10V | >200mA | 9.99Ω, 99.9Ω,29.99 kΩ | ±3% ±2 digits |
| Test Lead Null 4Ω, Hazard warning LED >25V, Typical Test Time(2Ω) <2 sec | |||
| Insulation | |||
|---|---|---|---|
| Open Circuit Voltage (DC) | Output Current | Ranges (Auto Range) | Accuracy |
| 250V | 1mA - 0 = + 20% @ 250kΩ | 9.99MΩ, 99.9MΩ, 2000MΩ | ±3% ±1 digits ±6% ±1 digits |
| 500V | 1mA - 0 = + 20% @ 500kΩ | 9.99MΩ, 99.9MΩ, 199MΩ, 2000MΩ | ±3% ±1 digits ±6% ±1 digits |
| 1000V | 1mA - 0 = + 20% @ 1MΩ | 9.99MΩ, 99.9MΩ, 399MΩ, 2000MΩ | ±3% ±1 digits ±6% ±1 digits |
| Short circuit current (in to 2kΩ) <2mA, Typical Test Time (10MΩ) <2 sec | |||
| Breakdown Voltage / SPD | ||||
|---|---|---|---|---|
| Range | Measurement Range | Accuracy | Limit Detection | Voltage Increment |
| 1000 V | 0 - 105 | +5% +5 digits | 1mA | 1 volt at 100V per sec |
| Loop Impedance | |||
|---|---|---|---|
| Range | Accuracy | ||
| ATT No trip 0.00 - 9.99 Ω | ± 5% ± 5 digits | ||
| ATT No trip 10.00 - 99.9 Ω | ± 3% ± 3 digits | ||
| ATT No trip 100 - 500 Ω | ± 3% ± 3 digits | ||
| High Current 0.00 - 500 Ω | ± 3% ± 3 digits | ||
| PSC/PFC |
|---|
| PSC accuracy is derived from measured loop impedance
specification and measured voltage specification. Voltage measurement:+/- 3% 50/60Hz and 90 - 250V |
| RCD (Type AC, ACS, A, AS) | ||||
|---|---|---|---|---|
| Function | Accuracy | Rated Voltage | Tripping Time Accuracy | |
| X ½ | -0% to -10% | 195V - 253V AC 50Hz | Up to 1 second | ±(1% + 1ms) |
| X 1 | +0% to +10% | Above 1 second | ±(1% +10ms) | |
| X 5 | +0% to +10% | - | - | |
| Ramp Test | increments in 3mA steps | - | - | |
| Auto test | 30mA RCD | ½ x 0º, ½ x 180 º, 1 x 0º, 1 x 180 º, 5 x 0º, 5x 180 º | ||
| EV RDC-DD | 6mA (-0% +13%) | |||
Document Downloads
Additional Information
SKU
KT64DL
Manufacturer Part Code
KT64DL
Accessories
Product
SKU
MPN
Price (Ex VAT)
Kewtech KT64DL Multifunction Tester with EV Option
£695.00
£834.00 inc vat
